- L. Guzzella, U. Wenger, and R. Martin (2000) IC-engine Downsizing and Pressure-Wave Supercharging for Fuel Economy. SAE Technical Paper 2000-01-1019. [Google Scholar]
- P. Soltic (2000) Part-Load Optimized SI Engine Systems. PhD Thesis, Swiss Federal Institute of Technology, Zürich. [Google Scholar]
- D. Petitjean, L. Bernardini, Ch.Middlemass, S.M. Shahed, and R.G. Hurley (2004) Advanced gasoline engine turbocharging technology for fuel economy improvements. SAE Technical Paper 2004-01-0988. [Google Scholar]
- M.J. van Nieuwstadt, I.V.Kolmanovsky, P.E.Moraal, A. Stefanopoulou, and M. Jankovic (2000) EGR VGT control schemes: Experimental comparison for a high-speed diesel engine. IEEE Cont. Syst. Mag., 20, 63-79. [CrossRef] [Google Scholar]
- L.Guzzellaand A. Amstuz (1998) Control of diesel engines. IEEE Contr. Syst. Mag., 18, 53-71. [CrossRef] [Google Scholar]
- M.Jankovic, M. Jankovic, and I. Kolmanovsky (2000) Constructive lyapunov control design for turbocharged diesel engines. IEEE T. Contr. Syst. T., 8, 288-299. [CrossRef] [Google Scholar]
- M. Nyberg (2002) Model-based diagnosis of an automotive engine using several types of fault models. IEEE T. Contr. Syst. T., 10, 679-689. [CrossRef] [Google Scholar]
- K.Yong-Wha, G. Rizzoni, and V. Utkin (1998) Automotive engine diagnosis and control via nonlinear estimation. IEEE Contr. Syst. Mag., 18, 84-99. [CrossRef] [Google Scholar]
- L.Eriksson, L.Nielsen, J.Brugård, J.Bergström, F. Pettersson, and P. Andersson (2002) Modeling and simulation of a turbo charged SI engine. Annu. Rev. Control, 26, 129-137. [CrossRef] [Google Scholar]
- E. Hendricks (2001) Isothermal vs. adiabatic mean value SI engine models. In 3rd IFACWorkshop, Advances in Automotive Control, Preprints, Karlsruhe, Germany, 373-378. [Google Scholar]
- B. Massey (1998) Mechanics of Fluids. Stanley Thornes, 7th edition. [Google Scholar]
- A.Ellmanand R. Piché (1999) A two regime orifice flow formula for numerical simulation. J. Dyn. Syst., 121, 721-724. [CrossRef] [Google Scholar]
- P. Andersson (2005) Air Charge Estimation in Turbocharged Spark Ignition Engines. PhD Thesis, Linköpings Universitet. [Google Scholar]
- J.B. Heywood (1988) Internal Combustion Engine Fundamentals. McGraw-Hill series in mechanical engineering. McGraw- Hill. [Google Scholar]
- P. Andersson and L. Eriksson (2004) Cylinder air charge estimator in turbocharged SI-engines. In SAE Technical Paper 2004-01-1366. [Google Scholar]
- L. Eriksson (2002) Mean value models for exhaust system temperatures. SAE Transactions, J. Engines, 2002-01-0374, 111. [Google Scholar]
- J. Wahlström and L. Eriksson (2006) Modeling of a diesel engine with VGT and EGR including oxygen mass fraction. Technical report, Vehicular Systems, Department of Electrical Engineering, Linköping University. [Google Scholar]
- N. Watson and M.S. Janota (1982) Turbocharging the Internal Combustion Engine. The Macmillan Press. ISBN 0-333-24290-4. [Google Scholar]
- R.I. Lewis (1996) Turbomachinery Performance Analysis. Arnold. [Google Scholar]
- S.L. Dixon (1998) Fluid Mechanics and Thermodynamics of Turbomachinery. Butterworth-Heinemann, 4th edition. [Google Scholar]
- M. Kao and J.J. Moskwa (1995) Turbocharged diesel engine modeling for nonlinear engine control and state estimation. J. Dyn. Syst. - T. ASME, 117, 20-30. [Google Scholar]
- J.P. Jensen, A.F. Kristensen, S.C. Sorenson, N. Houbak, and E. Hendricks (1991) Mean value modeling of a small turbocharged diesel engine. SAE Technical Paper 910070. [Google Scholar]
- M. Müller, E. Hendricks, and S.C. Sorenson (1998) Mean ValueModelling of Turbocharged Spark Ignition Engines. SAE SP-1330 Modeling of SI and Diesel Engines, (SAE Technical Paper 980784), 125-145. [Google Scholar]
- P. Moraal and I. Kolmanovsky (1999) Turbocharger Modeling for Automotive Control Applications. SAE Technical Paper 1999-01-0908, 309-322. [Google Scholar]
- S.C. Sorenson, E. Hendrick, S. Magnusson, and A. Bertelsen (2005) Compact and accurate turbocharger modelling for engine control. In Electroni Engine Controls 2005 (SP-1975), SAE Technical Paper 2005-01-1942. [Google Scholar]
- J. Wahlström and L. Eriksson (2004) Modeling of a diesel engine with VGT and EGR. Technical report, Vehicular Systems, Department of Electrical Engineering, Linköping University. [Google Scholar]
- E.M. Greitzer (1981) The stability of pumping systems - the 1980 freeman scholar lecture. J. Fluid Eng., 103, 193-242. [CrossRef] [Google Scholar]
- J.T.Gravdahland O. Egeland (1999) Centrifugal compressor surge and speed control. IEEE T. Contr. Syst. T., 7, 567-579. [Google Scholar]
- M. Ammann, N.P. Fekete, A. Amstutz, and L. Guzzella (2001) Control-oriented modeling of a turbocharged common-rail diesel engine. In Proceedings from the 3rd. Int. Conference on Control and Diagnostics in Automotive Applications (CD Auto 01), Sestri Levante. [Google Scholar]
- N. Watson (1981) Transient performance simulation and analysis of turbocharged diesel engines. In SAE Technical Paper 810338. [Google Scholar]
- L. Eriksson, L. Nielsen, J. Brug°ard, J. Bergström, F. Pettersson, and P. Andersson (2001) Modeling and simulation of a turbo charged SI engine. In 3rd IFAC Workshop “Advances in Automotive Control”, Preprints, 379-387, Karlsruhe, Germany, 2001. Elsevier Science. [Google Scholar]
- P. Andersson and L. Eriksson (2004) Mean-value observer for a turbocharged SI-engine. In IFAC Symposium on Advances in Automotive Control, University of Salerno, Italy, April 19-23, 146-151. [Google Scholar]
- P. Andersson and L. Eriksson (2005) Observer based feedforward air-fuel control of turbocharged SI-engines. IFAC World Congress, Prague, Czech Republic. [Google Scholar]
- P. Andersson, E. Frisk, and L. Eriksson (2005) Sensor selection for observer feedback in turbocharged spark ignited engines. IFAC World Congress, Prague, Czech Republic. [Google Scholar]
- J. Wahlström, L. Eriksson, L. Nielsen, and M. Pettersson (2005) PID controllers and their tuning for EGR and VGT control in diesel engines. IFACWorld Congress, Prague, Czech Republic. [Google Scholar]
- J. Wahlström (2006) Control of EGR and VGT for emission control and pumping work minimization in Diesel engines. Licentiate Thesis, Linköping University. [Google Scholar]
Numéro |
Oil & Gas Science and Technology - Rev. IFP
Volume 62, Numéro 4, July-August 2007
Dossier: New Trends on Engine Control, Simulation and Modelling
|
|
---|---|---|
Page(s) | 523 - 538 | |
DOI | https://doi.org/10.2516/ogst:2007042 | |
Publié en ligne | 6 décembre 2007 |
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.