Dossier: New Trends on Engine Control, Simulation and Modelling
Open Access
Issue
Oil & Gas Science and Technology - Rev. IFP
Volume 62, Number 4, July-August 2007
Dossier: New Trends on Engine Control, Simulation and Modelling
Page(s) 523 - 538
DOI https://doi.org/10.2516/ogst:2007042
Published online 06 December 2007
  • L. Guzzella, U. Wenger, and R. Martin (2000) IC-engine Downsizing and Pressure-Wave Supercharging for Fuel Economy. SAE Technical Paper 2000-01-1019.
  • P. Soltic (2000) Part-Load Optimized SI Engine Systems. PhD Thesis, Swiss Federal Institute of Technology, Zürich.
  • D. Petitjean, L. Bernardini, Ch.Middlemass, S.M. Shahed, and R.G. Hurley (2004) Advanced gasoline engine turbocharging technology for fuel economy improvements. SAE Technical Paper 2004-01-0988.
  • M.J. van Nieuwstadt, I.V.Kolmanovsky, P.E.Moraal, A. Stefanopoulou, and M. Jankovic (2000) EGR VGT control schemes: Experimental comparison for a high-speed diesel engine. IEEE Cont. Syst. Mag., 20, 63-79. [CrossRef]
  • L.Guzzellaand A. Amstuz (1998) Control of diesel engines. IEEE Contr. Syst. Mag., 18, 53-71. [CrossRef]
  • M.Jankovic, M. Jankovic, and I. Kolmanovsky (2000) Constructive lyapunov control design for turbocharged diesel engines. IEEE T. Contr. Syst. T., 8, 288-299. [CrossRef]
  • M. Nyberg (2002) Model-based diagnosis of an automotive engine using several types of fault models. IEEE T. Contr. Syst. T., 10, 679-689. [CrossRef]
  • K.Yong-Wha, G. Rizzoni, and V. Utkin (1998) Automotive engine diagnosis and control via nonlinear estimation. IEEE Contr. Syst. Mag., 18, 84-99. [CrossRef]
  • L.Eriksson, L.Nielsen, J.Brugård, J.Bergström, F. Pettersson, and P. Andersson (2002) Modeling and simulation of a turbo charged SI engine. Annu. Rev. Control, 26, 129-137. [CrossRef]
  • E. Hendricks (2001) Isothermal vs. adiabatic mean value SI engine models. In 3rd IFACWorkshop, Advances in Automotive Control, Preprints, Karlsruhe, Germany, 373-378.
  • B. Massey (1998) Mechanics of Fluids. Stanley Thornes, 7th edition.
  • A.Ellmanand R. Piché (1999) A two regime orifice flow formula for numerical simulation. J. Dyn. Syst., 121, 721-724. [CrossRef]
  • P. Andersson (2005) Air Charge Estimation in Turbocharged Spark Ignition Engines. PhD Thesis, Linköpings Universitet.
  • J.B. Heywood (1988) Internal Combustion Engine Fundamentals. McGraw-Hill series in mechanical engineering. McGraw- Hill.
  • P. Andersson and L. Eriksson (2004) Cylinder air charge estimator in turbocharged SI-engines. In SAE Technical Paper 2004-01-1366.
  • L. Eriksson (2002) Mean value models for exhaust system temperatures. SAE Transactions, J. Engines, 2002-01-0374, 111.
  • J. Wahlström and L. Eriksson (2006) Modeling of a diesel engine with VGT and EGR including oxygen mass fraction. Technical report, Vehicular Systems, Department of Electrical Engineering, Linköping University.
  • N. Watson and M.S. Janota (1982) Turbocharging the Internal Combustion Engine. The Macmillan Press. ISBN 0-333-24290-4.
  • R.I. Lewis (1996) Turbomachinery Performance Analysis. Arnold.
  • S.L. Dixon (1998) Fluid Mechanics and Thermodynamics of Turbomachinery. Butterworth-Heinemann, 4th edition.
  • M. Kao and J.J. Moskwa (1995) Turbocharged diesel engine modeling for nonlinear engine control and state estimation. J. Dyn. Syst. - T. ASME, 117, 20-30.
  • J.P. Jensen, A.F. Kristensen, S.C. Sorenson, N. Houbak, and E. Hendricks (1991) Mean value modeling of a small turbocharged diesel engine. SAE Technical Paper 910070.
  • M. Müller, E. Hendricks, and S.C. Sorenson (1998) Mean ValueModelling of Turbocharged Spark Ignition Engines. SAE SP-1330 Modeling of SI and Diesel Engines, (SAE Technical Paper 980784), 125-145.
  • P. Moraal and I. Kolmanovsky (1999) Turbocharger Modeling for Automotive Control Applications. SAE Technical Paper 1999-01-0908, 309-322.
  • S.C. Sorenson, E. Hendrick, S. Magnusson, and A. Bertelsen (2005) Compact and accurate turbocharger modelling for engine control. In Electroni Engine Controls 2005 (SP-1975), SAE Technical Paper 2005-01-1942.
  • J. Wahlström and L. Eriksson (2004) Modeling of a diesel engine with VGT and EGR. Technical report, Vehicular Systems, Department of Electrical Engineering, Linköping University.
  • E.M. Greitzer (1981) The stability of pumping systems - the 1980 freeman scholar lecture. J. Fluid Eng., 103, 193-242. [CrossRef]
  • J.T.Gravdahland O. Egeland (1999) Centrifugal compressor surge and speed control. IEEE T. Contr. Syst. T., 7, 567-579. [CrossRef]
  • M. Ammann, N.P. Fekete, A. Amstutz, and L. Guzzella (2001) Control-oriented modeling of a turbocharged common-rail diesel engine. In Proceedings from the 3rd. Int. Conference on Control and Diagnostics in Automotive Applications (CD Auto 01), Sestri Levante.
  • N. Watson (1981) Transient performance simulation and analysis of turbocharged diesel engines. In SAE Technical Paper 810338.
  • L. Eriksson, L. Nielsen, J. Brug°ard, J. Bergström, F. Pettersson, and P. Andersson (2001) Modeling and simulation of a turbo charged SI engine. In 3rd IFAC Workshop “Advances in Automotive Control”, Preprints, 379-387, Karlsruhe, Germany, 2001. Elsevier Science.
  • P. Andersson and L. Eriksson (2004) Mean-value observer for a turbocharged SI-engine. In IFAC Symposium on Advances in Automotive Control, University of Salerno, Italy, April 19-23, 146-151.
  • P. Andersson and L. Eriksson (2005) Observer based feedforward air-fuel control of turbocharged SI-engines. IFAC World Congress, Prague, Czech Republic.
  • P. Andersson, E. Frisk, and L. Eriksson (2005) Sensor selection for observer feedback in turbocharged spark ignited engines. IFAC World Congress, Prague, Czech Republic.
  • J. Wahlström, L. Eriksson, L. Nielsen, and M. Pettersson (2005) PID controllers and their tuning for EGR and VGT control in diesel engines. IFACWorld Congress, Prague, Czech Republic.
  • J. Wahlström (2006) Control of EGR and VGT for emission control and pumping work minimization in Diesel engines. Licentiate Thesis, Linköping University.

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.