Open Access
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 71, Numéro 3, May–June 2016
Numéro d'article 38
Nombre de pages 20
Publié en ligne 9 septembre 2015
  • Aguilera R. (2013) Flow Units: From Conventional to Tight Gas to Shale Gas to Tight Oil to Shale Oil Reservoirs, SPE Paper 165360 presented at the SPE Western Regional & AAPG Pacific Section Meeting, Joint Technical Conference, Monterey, CA, USA, 19–25 April. [Google Scholar]
  • Behmanesh H., Hamdi H., Clarkson C.R. (2015) Production data analysis of tight gas condensate reservoirs, Journal of Natural Gas Science and Engineering 22, 0, 22–34. [CrossRef] [Google Scholar]
  • Bradley J.S., Powley D.E. (1994) Pressure Compartments in Sedimentary Basins: A Review, in Basin Compartments and Seals, Ortoleva P.J. (ed.), The American Association of Petroleum Geologists. [Google Scholar]
  • Chilingarian G.V., Mazzullo S.J., Rieke H.H. (1992) Introduction, in Carbonate Reservoir Characterization: A Geologic-Engineering Analysis, Part I, Elsevier Science Publishers B.V. [Google Scholar]
  • Corbett P.W.M., Hamdi H., Gurav H. (2012) Layered fluvial reservoirs with internal fluid cross flow: a well-connected family of well test pressure transient responses, Petroleum Geoscience 18, 219–229. [CrossRef] [Google Scholar]
  • Fetkovich M.J. (1980) Decline Curve Analysis Using Type Curves, Journal of Petroleum Technology, 32, 6, 1065–1077, SPE-4629-PA [Google Scholar]
  • Fox M.J., Chedburn A.C.S., Stewart G. (1988) Simple Characterization of Communication Between Reservoir Regions, SPE Paper 18360 presented at the European Petroleum Conference, London, United Kingdom, 16-19 Oct. [Google Scholar]
  • Hamdi H. (2014) Well-test response in stochastic permeable media, Journal of Petroleum Science and Engineering 119, 169–184. [CrossRef] [Google Scholar]
  • Hamdi H., Ruelland P., Bergey P., Corbett P.W.M. (2014) Using geological well testing for improving the selection of appropriate reservoir models, Petroleum Geoscience 20, 4, 353–368. [CrossRef] [Google Scholar]
  • Junkin J.E., Sippel M.A., Collins R.E., Lord M.E. (1992) Well Performance Evidence for Compartmented Geometry of Oil and Gas Reservoirs, SPE Paper 24356 presented at the SPE Rocky Mountain Regional Meeting, Casper, Wyoming, USA, 18-21 May. [Google Scholar]
  • Kaviani D., Jensen J.L., Lake L.W., Fahes M. (2008) Estimation of Interwell Connectivity in the Case of Fluctuating Bottomhole Pressures, SPE Paper 117856 presented at the International Petroleum Exhibition and Conference, Abu Dhabi, 3-6 Nov, DOI: 10.2118/117856-MS. [Google Scholar]
  • Malavazos M., McDonough R.C.M. (1991) Pressure-Transient Response in Compartmentalised Gas Reservoirs: A South Australian Field Example, SPE Paper 23009 presented at the SPE Asia-Pacific Conference, Perth, Australia, 4-7 Nov. [Google Scholar]
  • Massonnat G.J., Norris R.J., Chalmette J.-C. (1993) Well Test Interpretation in Geologically Complex Channelized Reservoirs, SPE Paper 00026464 presented at the SPE Annual Technical Conference and Exhibition, Houston, Texas, 3-6 Oct. [Google Scholar]
  • Nobakht M., Clarkson C.R. (2012) A New Analytical Method for Analyzing Linear Flow in Tight/Shale Gas Reservoirs: Constant-Flowing-Pressure Boundary Condition, SPE Reservoir Evaluation & Engineering 15, 3, 370–384, SPE-143989-PA. [CrossRef] [Google Scholar]
  • Noetinger B. (2015) About the Determination of Quasi Steady State Storativity and Connectivity Matrix of Wells in 3D Heterogeneous Formations, Mathematical Geosciences (submitted). [Google Scholar]
  • Rahman N.M.A., Ambastha A.K. (2000) Generalized 3D Analytical Model for Transient Flow in Compartmentalized Reservoirs, SPE Journal 5, 3, 276–286, SPE-65106-PA. [CrossRef] [Google Scholar]
  • Sayarpour M., Kabir C.S., Lake L.W. (2008) Field Applications of Capacitance-Resistive Models in Waterfloods, SPE Paper 114983 presented at the SPE Annual Technical Conference and Exhibition, Denver, 21-24 Nov, DOI: 10.2118/114983-MS. [Google Scholar]
  • Shahamat M.S. (2014) Production Data Analysis of Tight and Shale Reservoirs, PhD Thesis, University of Calgary, Calgary. [Google Scholar]
  • Shahamat M.S., Aguilera R. (2010) A New Method for Production Decline Analysis of Tight Gas Formations, SPE Paper 138149 presented at the Canadian Unconventional Resources and International Petroleum Conference, Calgary, Alberta, Canada, 19-21 Oct. [Google Scholar]
  • Shahamat M.S., Mattar L., Aguilera R. (2014) A Physics-Based Method for Production Data Analysis of Tight and Shale Petroleum Reservoirs Using Succession of Pseudo-Steady States, SPE Paper 167686 presented at the SPE/EAGE European Unconventional Resources Conference and Exhibition, Vienna, Austria, 25-27 Feb. [Google Scholar]
  • Stalgorova E, Mattar L. (2012) Practical Analytical Model To Simulate Production of Horizontal Wells With Branch Fractures, SPE Paper 162515 presented at the SPE Canadian Unconventional Resources Conference, Calgary, Alberta, Canada, 30 Oct.-1 Nov. [Google Scholar]
  • Stewart G. (2011) Well Test Design & Analysis, PennWell. [Google Scholar]
  • Stewart G., Whaballa A.E. (1989) Pressure Behavior of Compartmentalized Reservoirs, SPE Paper 19779 presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA, 8-11 Oct. [Google Scholar]
  • Valko P., Doublet L.E., Blasingame T.A. (2000) Development and Application of the Multiwell Productivity Index (MPI), SPE Journal 5, 1, 21–31, DOI: 10.2118/51793-PA. [CrossRef] [Google Scholar]
  • Wattenbarger R.A., El-Banbi A.H., Villegas M.E., Maggard J.B. (1998) Production Analysis of Linear Flow Into Fractured Tight Gas Wells, SPE Paper 39931 presented at the SPE Rocky Mountain Regional/Low-Permeability Reservoirs Symposium, Denver, Colorado, USA, 5-8 April. [Google Scholar]
  • Yousef A.A., Jensen J.L., Lake L.W. (2009) Integrated Interpretation of Interwell Connectivity Using Injection and Production Fluctuations, Mathematical Geosciences 41, 1, 81–102, DOI: 10.1007/s11004-008-9189-x. [CrossRef] [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.