IFP International Conference – Advances in Hybrid Powertrains
Open Access
Numéro
Oil Gas Sci. Technol. – Rev. IFP
Volume 65, Numéro 1, January-February 2010
IFP International Conference – Advances in Hybrid Powertrains
Page(s) 67 - 78
DOI https://doi.org/10.2516/ogst/2009056
Publié en ligne 25 novembre 2009
  • Buller S., Thele M., Karden E.De Doncker R.W. (2003) Impedance-based non-linear dynamic battery modelling for automotive applications, J. Power Sources 113, 422-430. [CrossRef] [Google Scholar]
  • Freedom CAR Battery Test Manual for Power-Assist Hybrid Electric Vehicles, DOE/ID-11069, October 2003. [Google Scholar]
  • Johnson V.H. (2002) Battery performance models in ADVISOR, J. Power Sources 110, 2, 321-329. [Google Scholar]
  • Sabatier J., Aoun M., Oustaloup A., Grégoire G., Ragot F.Roy P. (2006) Fractional system identification for lead acid battery state of charge estimation, Signal Process. 86, 2645-2657. [CrossRef] [Google Scholar]
  • Plett G.L. (2004) Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs, Part 2. Modeling and identification, J. Power Sources 134, 262-276. [CrossRef] [Google Scholar]
  • Barsoukov E., Macdonald J.R. (2005) Impedance Spectroscopy, Second Edition, Wiley-Interscience. [Google Scholar]
  • Barsoukov E., Kim J.H., Kim D.H., Hwang K.S., Yoon C.O.Lee H. (2000) Parametric analysis using impedance spectroscopy: relationship between material properties and battery performance, J. New Mat. Electr. Sys. 3, 301-308. [Google Scholar]
  • Itagaki M., Kobari N., Yotsuda S., Watanabe K., Kinoshita S.Ue M. (2004) In situ electrochemical impedance spectroscopy to investigate negative electrode of lithium-ion rechargeable batteries, J. Power Sources 135, 255-261. [CrossRef] [Google Scholar]
  • Bundy K., Karlsson M., Lindbergh G.Lundqvist A. (1998) An electrochemical impedance spectroscopy method for prediction of the state of charge of a nickel-metal hydride battery at open circuit and during discharge, J. Power Sources 72, 118-125. [Google Scholar]
  • Blanke H., Bohlen O., Buller S., De Doncker R.W., Fricke B., Hammouche A., Linzen D., Thele M.Sauer D.U. (2005) Impedance measurements on lead-acid batteries for state-ofcharge, state-of health and cranking capability prognosis in electric and hybrid electric vehicles, J. Power Sources 144, 2, 418-425. [CrossRef] [Google Scholar]
  • Kuhn E., Forgez C., Friedrich G., Macret P. (2005) Comparison between two NiMH battery models. EVS 21, Monaco, April 2005. [Google Scholar]
  • Karden E., Buller S.De Doncker R.W. (2002) A frequencydomain approach to dynamical modelling of electrochemical power sources, Electrochim. Acta 47, 2347-2356. [CrossRef] [Google Scholar]
  • Thele M., Bohlen O., Sauer D.U.Karden E. (2008) Development of a voltage-behaviour model for NiMH batteries using an impedance based modelling concept, J. Power Sources 175, 635-643. [CrossRef] [Google Scholar]
  • Mauracher P.Karden E. (1997) Dynamic modelling of lead/acid batteries using impedance spectroscopy for parameter identification, J. Power Sources 67, 69-84. [CrossRef] [Google Scholar]
  • Takano K., Nozaki K., Saito Y., Negshi A., Kato K.Yamagushi Y. (2000) Simulation study of electrical dynamic characteristics of lithiumion battery, J. Power Sources 90, 214-223. [CrossRef] [Google Scholar]
  • Tenno A., Tenno R., Suntio T. (2004) A Method for Battery Impedance Analysis, J. Electrochem. Soc. 151, 6, A806- A824. [CrossRef] [Google Scholar]
  • Kuhn E., Forgez C., Lagonotte P.Friedrich G. (2006) Modelling Ni-MH battery using Cauer and Foster structures, J. Power Sources 158, 2, 1490-1497. [CrossRef] [Google Scholar]
  • Oustaloup A., Cois O., Le Lay L. (2005) Représentation et identification par modèle non entier, Lavoisier, Paris. [Google Scholar]
  • Diard J.P., Le Gorrec B.Montella C. (1998) EIS study of electrochemical battery discharge on constant load, J. Power Sources 70, 78-84. [CrossRef] [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.