ogst
Accueil Tous les numéros Volume 64 / Numéro 3 (May-June 2009) Oil & Gas Science and Technology - Rev. IFP, 64 3 (2009) 309-335 Références
Dossier: Simulation Tools for Powertrain Design and Control
Open Access
Numéro
Oil & Gas Science and Technology - Rev. IFP
Volume 64, Numéro 3, May-June 2009
Dossier: Simulation Tools for Powertrain Design and Control
Page(s) 309 - 335
DOI https://doi.org/10.2516/ogst/2009016
Publié en ligne 11 juin 2009
  • Amsden A.A., O'Rourke P.J., Butler T.D. (1989) KIVA-II, a Computer Program for Chemically Reactive Flows with Sprays, Report LA-11560-MS, Los Alamos National Laboratory. [Google Scholar]
  • Amsden A.A. (1992) KIVA 3: A KIVA with Block Structured Mesh for Complex Geometry, Los Alamos National Laboratory report LA 12503-Ms. [Google Scholar]
  • Amsden A.A. (1997) KIVA 3-V: A Block Structured KIVA Program for Engine with Vertical or Canted Valves, Los Alamos National Laboratory report LA 13313-Ms. [Google Scholar]
  • Angelberger C., Poinsot T., Delhaye B. (1997) Improving Near-Wall Combustion and Wall Heat Transfer Modeling in SI Engine Computations, SAE paper 972881. [Google Scholar]
  • Aytekin Gel (1999) A distributed-memory implementation of kiva-3 with refinements for large eddy simulation, College of Engineering and Mineral Resources at West Virginia University. [Google Scholar]
  • Baritaud T. (1989) Combustion and Fluid dynamic measurements in a spark ignition engine: effects of thermochemistry and velocity fields; turbulent flame speed, SAE paper 892098. [Google Scholar]
  • Beard P., Duclos J.M., Habchi C., Bruneaux G., Mokkadem K., Baritaud T. (2000) Extension of Lagrangian-Eulerian Spray Modeling: Application to high Pressure Evaporating Diesel Sprays, SAE paper 2000-01-1893. [Google Scholar]
  • Bohbot J., Gillet N. (2006) Impact of different mesh remapping techniques on 3D simulations in internal combustion engines, Eccomass CFD Proceeding, © TU Delft, Delft The Netherland. [Google Scholar]
  • Bohbot J., Chryssakis Ch., Pacaud P., Benkenida A. (2008) Coupling of a 1-D Injection Model with a 3-D Combustion Code for Direct Injection Diesel Engine Simulations, SAE paper 2008-01-0358. [Google Scholar]
  • Bova S.W.,Breshears C.P.,Cuicchi C.E.,Demirbilek Z.,Gabb H.A. (2000) Dual-level parallel analysis of harbor wave response using MPI and OpenMP, Int. J. High Perf. C. 14, 49-64, 2000. [CrossRef] [Google Scholar]
  • Colin O. (2007) Étude GSM D.C.1 2006 – Modélisation Diesel, Phase 1 : Amélioration du modèle de mél ECFM3Z, Rapport IFP 59798 (In French). [Google Scholar]
  • Colin O.,Benkenida A. (2004) The 3-Zones Extended Coherent Flame Model (ECFM3Z) for Computing Premixed Diffusion Combustion, Oil Gas Sci. Technol. – Rev. IFP 59, 6, 593-609. [Google Scholar]
  • Colin O., Pires da Cruz A.,Jay S. (2005) Detailed Chemistry Based Auto-ignition Model Including Low Temperature Phenomena Applied to 3-D Engine Calculations, Proc. Combust. Institute 30, 2649-2656. [Google Scholar]
  • Cuthill E.H., McKee J. (1969) Reducing the bandwith of sparse symmetric matrices, ACM publication, 24th National Conference Assoc. Comp. Mach., 1969, pp. 157-172. [Google Scholar]
  • Dongarra J.J., Hempel R., Hey A.J.G., Walker D.W. (1993) A proposal for a user-level, message passing interface in a distributed memory environment, Technical Report TM-12231, Oak Ridge National Laboratory, February 1993. [Google Scholar]
  • Doss N., Gropp W., Lusk E., Skjellum A. (1993) A model implementation of MPI, Technical report, Argonne National Laboratory. [Google Scholar]
  • Duclos J.-M., Colin O. (2001) Arc Kernel Tracking Ignition Model for 3D Spark-Ignition Engine Calculations, paper (2-25), COMODIA, 2001. [Google Scholar]
  • Duclos J.M., Zolver M. (1998) 3D Modeling of Intake, Injection and Combustion in a DI-SI Engine under Homogeneous and Stratified Operating Conditions, COMODIA, 1998. [Google Scholar]
  • Duclos J.M.,Zolver M.,Baritaud T. (1999) 3D Modeling of Combustion for DI-SI Engines, Oil Gas Sci. Technol. – Rev. IFP 54, 2, 259-264. [Google Scholar]
  • Gresho P.M. (1990) On the theory of semi-implicit projection methods for viscous incompressible flow and its implementation via a finite element method that also introduces a nearly consistent mass matrix, part 2: applications, Int. J. Numer. Meth. Fl. 11, 621. [Google Scholar]
  • Habchi C. (2006) Modélisation Tridimensionnelle de l'injection et de la préparation du mélange gaz/carburant dans les moteurs à combustion interne, Mémoire de HDR, Institut National Polytechnique de Toulouse. [Google Scholar]
  • Habchi C., Torres A. (1992) A 3D Multi-Block Structured Version of the KIVA-II code, First European CFD Conference proceedings, pp. 502-512. [Google Scholar]
  • Hautman D.J.,Dryer F.L.,Schug K.P.,Glassman I. (1981) A Multiple-step Overall Kinetic Mechanism for the Oxidation of Hydrocarbons, Combust. Sci. Technol. 25, 219-235. [CrossRef] [Google Scholar]
  • Heel H., Maly R., Weller H.G., Gosman A.D. (1998) Validation of SI Combustion Model over Range of Speed, Load, Equivalence Ratio and Spark Timing, COMODIA, 1998. [Google Scholar]
  • Henriot S., Chaouche A., Cheve E., Duclos J.M., Leduc P., Menegazzi P., Monnier G., Ranini A. (1999) NSDI-3: A small bore GDI Engine, SAE paper 1999-01-0172. [Google Scholar]
  • Heywood J.B. (1988) Internal Combustion Engines Fundamentals, Mc Graw Hill Publication. [Google Scholar]
  • Jay S., Béard P., Pires da Cruz A. (2007) Modeling Coupled Processes of CO and Soot Formation and Oxidation for Conventional and HCCI Diesel Combustion, SAE paper 2007-01-0162. [Google Scholar]
  • Knop V.,Colin O.,Benkenida A.,Jay S. (2006) Adaptation of the ECFM combustion model to hydrogen internal combustion engines, 1st International Symposium on Hydrogen Internal Combustion Engines, September 28-29, 2006. [Google Scholar]
  • Knop V., Boulerie J.C., Bohbot J., Jay S. (2007) Controlling CAITM combustion mode with VVA: A simulation approach, SAE paper 2007-01-0177. [Google Scholar]
  • Leveque R.J. (1992) Numerical Methods for Conservation Laws, Lectures in Mathematics, ETH Zürich, Birkhäuser Verlag. [Google Scholar]
  • Lewis J.G. (1982) Implementation of the Gibbs-Poole-Stockmeyer and Gibbs King algorithm, ACM T. Math. Software 180-189. [Google Scholar]
  • Mantel T. (1992) Three-dimensional study of flame kernel formation around a spark plug, SAE 920587. [Google Scholar]
  • Margolin L.G., Shashkov M. (2005) Remapping, Recovery and Repair on a Staggered Grid, Los Alamos National Laboratory Report, LA-UR-03-2230. [Google Scholar]
  • Martinot S., Béard P., Roesler J., Garo A. (2001) Comparison and Coupling of Homogeneous Reactor and Flamelet Library Soot Modeling Approaches for Diesel Combustion, SAE paper 2001-01-3684. [Google Scholar]
  • Naber J.D., Reitz R.D. (1988) Modeling engine spray/wall impingement, SAE Technical Paper Serie, March. [Google Scholar]
  • Reitz R.D. (1987) Modeling atomization processes in high pressure vaporizing sprays, Atomization Spray Technol. 3, 309-337. [Google Scholar]
  • O'Rourke P.J., Amsden A.A. (1986) Implementation of a Conjugate Residual Iteration in the KIVA Computer Program, Report LA-10849-MS, Los Alamos National Laboratory. [Google Scholar]
  • O'Rourke P.J.,Sahota M.S. (1998) A Variable Explicit/Implicit Method for calculating Advection on Unstructured Meshes, J. Comput. Phys. 143, 312-345. [Google Scholar]
  • O'Rourke P.J.,Zhang S.,Sahota M.S. (1999) A Parallel, Unstructured-Mesh Methodology for Device-Scale Combustion Calculations, Oil Gas Sci. Technol. – Rev. IFP 54, 2, 169-173. [Google Scholar]
  • Patankar S.V. (1980) Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Corp., Washington D.C. [Google Scholar]
  • Rabenseifner R., Hager G., Jost G. (2006) Hybrid MPI/OpenMP Parallel Programming on Clusters of Multi-Core SMP Nodes, Lecture Notes in Computer Science, Recent Advances in Parallel Virtual Machine and Message Passing Interface. [Google Scholar]
  • Shashkov M.,Wendroff B. (2004) The repair paradigm and application to conservation laws, J. Comput. Phys. 198, 265-277. [CrossRef] [Google Scholar]
  • Sinha N., Cavallo P.A., Lee R.A., Hosangadi A., Kenzakowski D.C., Dash S.M., Affes H., Chu D. (1998) Novel CFD Techniques for In-Cylinder Flows on Tetrahedral Grids, SAE paper 980138. [Google Scholar]
  • Sloan S.W. (1986) An algorithm for wave front reduction of sparse matrices, Int. J. Numer. Meth. Eng. 23, 239-251. [CrossRef] [Google Scholar]
  • Tatschl R., Gabriel H.P., Priesching P. (2001) FIRE – A Genetic CFD Platform for DID Engine Mixture Formation and Combustion Simulation, 11th International Multidimensional Engine Modeling User's Group Meeting at the SAE Congress, 2001. [Google Scholar]
  • Torres A., Henriot S. (1994) 3D Modeling of Combustion in Lean Burn Four-Valve Engines: Influence of Intake Configuration, COMODIA, 1994. [Google Scholar]
  • Torres A., Henriot S. (1996) Modeling the Effects of EGR Inhomogeneities Induced by Intake Systems in a Four-Valve Engine, SAE paper 961959. [Google Scholar]
  • Walter B., Gatellier B. (2002) ent of the high power NADITM concept using dual mode Diesel combustion to achieve zero NOx and particulate emissions, Proc. SAE Conf. 2002-01-1744. [Google Scholar]
  • Walter B., Monteiro L., Miche M., Gatellier B. (2004) Improvement of Exhaust and Noise Emissions of the NADI™ concept using pre-mixed type combustion with multiple stages injection, Proceedings of The Diesel Engine: TODAY and TOMORROW, SIA International Congress, Lyon, 12-13 May 2004. [Google Scholar]
  • Zeldovitch YA.B., Sadovnikov P.YA., Frank-Kamenetskii D.A. (1947) Oxidation of Nitrogen in Combustion, translated by Shelef M., Academy of Science of USSR, Moscow. [Google Scholar]
  • Zolver M., Torres A., Klahr D. (2001) CFD and Combustion in Engines with an Unstructured Parallel Solver Based on KIVA, paper (1-14), COMODIA, 2001. [Google Scholar]
  • Zolver M., Klahr D., Torres A. (2002) An Unstructured Parallel Solver for Engine Intake and Combustion Stoke Simulation, SAE paper 2002-01-1120. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.