7th Takreer Research Centre Symposium
Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 73, 2018
7th Takreer Research Centre Symposium
Article Number 28
Number of page(s) 11
DOI https://doi.org/10.2516/ogst/2018024
Published online 31 August 2018
  • Stewart, M., Lewis, O.T. (2013) Heat exchanger equipment field manual: common operating problems and practical solutions, 1st Edition, Gulf Professional Publishing, Elsevier, Houston. [Google Scholar]
  • Shah, R.K., Subbarao, E.C., Mashelkar, R.A. (1988) Heat transfer equipment design, Hemisphere Publishing Corporation, New York. [Google Scholar]
  • Kern D.Q. (1983) Process heat transfer, McGraw Hill, Tokyo. [Google Scholar]
  • Towler G., Sinnott R. (2013) Chemical engineering design, 2nd edn., Butterworth-Heinemann, Oxford. [Google Scholar]
  • McKetta J.J. Jr (1992) Heat transfer design methods, Marcel Dekker, New York. [Google Scholar]
  • Jones D.S.J., Pujado P.R. (2008) Handbook of petroleum processing, Springer, Dordrecht. [Google Scholar]
  • Colannino J. (2006) Modeling of combustion system: a practical approach, CRC Press, Boca Raton. [CrossRef] [Google Scholar]
  • Baukal C.E. (2014) The John Zink Hamworthy combustion handbook: applications, Vol. 3, 2nd edn., CRC Press, Boca Raton. [Google Scholar]
  • Thomas C.E. (2015) Process technology equipment and systems, 4th edn., Cengange learning, Stamford. [Google Scholar]
  • Jegla Z., Kohoutek J., Stehlik P. (2011) Design and operating aspects influencing fouling inside radiant coils of fired heaters operated in crude oil distillation plants, in: Proc. International Conference on Heat Exchanger Fouling and Cleaning, June 5–11, Crete Island, Greece, www.heatexchanger-fouling.com/papers/papers2011/2_Jegla_F.pdf. [Google Scholar]
  • Pettigrew M.J., Taylor C.E., Fisher N.J., Yetisir M., Smith B.A.W. (1998) Flow-induced vibration: recent findings and open questions, Nucl. Eng. Des. 185, 249–276. [CrossRef] [Google Scholar]
  • Miwa S., Mori M., Hibiki T. (2015) Two-phase flow induced vibration in piping systems, Prog. Nucl. Energy 78, 270–284. [CrossRef] [Google Scholar]
  • Seebold J.G. (2005) Combustion-driven oscillation in process heaters, IFRF Comb. J. 200507. [Google Scholar]
  • Nakamura T., Kaneko S., Inada F., Kato M., Ishihara K., Nishihara T., Mureithi N.W., Langthjem M.A. (2013) Flow-induced vibrations: classifications and lessons from practical experiences, 2nd edn., Academic Press, London. [Google Scholar]
  • Karan J., Baukal C.E. (2001) The John Zink combustion handbook, Vol.1, 2nd edn., CRC Press, Boca Raton. [Google Scholar]
  • Taha T., Cui Z.F. (2006) CFD modeling of slug flow in vertical tubes, Chem. Eng. Sci. 61, 676–687. [CrossRef] [Google Scholar]
  • Ganapathy V. (1987) Avoid heat transfer equipment vibration, Hydrocarbon Process., p. 62. [Google Scholar]
  • API, (2008) Standard 530, calculation of heater-tube thickness in petroleum refineries, 6th edn., American Petroleum Institute, Washington, DC. [Google Scholar]
  • Energy Institute, (2008) Guidelines for the avoidance of vibration induced fatigue failure in process pipework, 2nd edn, ISBN: 9780852934630, Energy Institute, London. [Google Scholar]
  • Courant R., Hilbert D. (1953) Methods of mathematical physics, Vol. 1, Interscience, Chapter 5, New York. [Google Scholar]
  • Wang D., Friswell M.I., Lei Y. (2006) Maximizing the natural frequency of a beam with an intermediate elastic support, J. Sound Vib. 291, 1229–1238. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.