7th Takreer Research Centre Symposium
Open Access
Numéro
Oil & Gas Science and Technology - Rev. IFP Energies nouvelles
Volume 73, 2018
7th Takreer Research Centre Symposium
Numéro d'article 28
Nombre de pages 11
DOI https://doi.org/10.2516/ogst/2018024
Publié en ligne 31 août 2018
  • Stewart, M., Lewis, O.T. (2013) Heat exchanger equipment field manual: common operating problems and practical solutions, 1st Edition, Gulf Professional Publishing, Elsevier, Houston. [Google Scholar]
  • Shah, R.K., Subbarao, E.C., Mashelkar, R.A. (1988) Heat transfer equipment design, Hemisphere Publishing Corporation, New York. [Google Scholar]
  • Kern D.Q. (1983) Process heat transfer, McGraw Hill, Tokyo. [Google Scholar]
  • Towler G., Sinnott R. (2013) Chemical engineering design, 2nd edn., Butterworth-Heinemann, Oxford. [Google Scholar]
  • McKetta J.J. Jr (1992) Heat transfer design methods, Marcel Dekker, New York. [Google Scholar]
  • Jones D.S.J., Pujado P.R. (2008) Handbook of petroleum processing, Springer, Dordrecht. [Google Scholar]
  • Colannino J. (2006) Modeling of combustion system: a practical approach, CRC Press, Boca Raton. [CrossRef] [Google Scholar]
  • Baukal C.E. (2014) The John Zink Hamworthy combustion handbook: applications, Vol. 3, 2nd edn., CRC Press, Boca Raton. [Google Scholar]
  • Thomas C.E. (2015) Process technology equipment and systems, 4th edn., Cengange learning, Stamford. [Google Scholar]
  • Jegla Z., Kohoutek J., Stehlik P. (2011) Design and operating aspects influencing fouling inside radiant coils of fired heaters operated in crude oil distillation plants, in: Proc. International Conference on Heat Exchanger Fouling and Cleaning, June 5–11, Crete Island, Greece, www.heatexchanger-fouling.com/papers/papers2011/2_Jegla_F.pdf. [Google Scholar]
  • Pettigrew M.J., Taylor C.E., Fisher N.J., Yetisir M., Smith B.A.W. (1998) Flow-induced vibration: recent findings and open questions, Nucl. Eng. Des. 185, 249–276. [CrossRef] [Google Scholar]
  • Miwa S., Mori M., Hibiki T. (2015) Two-phase flow induced vibration in piping systems, Prog. Nucl. Energy 78, 270–284. [CrossRef] [Google Scholar]
  • Seebold J.G. (2005) Combustion-driven oscillation in process heaters, IFRF Comb. J. 200507. [Google Scholar]
  • Nakamura T., Kaneko S., Inada F., Kato M., Ishihara K., Nishihara T., Mureithi N.W., Langthjem M.A. (2013) Flow-induced vibrations: classifications and lessons from practical experiences, 2nd edn., Academic Press, London. [Google Scholar]
  • Karan J., Baukal C.E. (2001) The John Zink combustion handbook, Vol.1, 2nd edn., CRC Press, Boca Raton. [Google Scholar]
  • Taha T., Cui Z.F. (2006) CFD modeling of slug flow in vertical tubes, Chem. Eng. Sci. 61, 676–687. [CrossRef] [Google Scholar]
  • Ganapathy V. (1987) Avoid heat transfer equipment vibration, Hydrocarbon Process., p. 62. [Google Scholar]
  • API, (2008) Standard 530, calculation of heater-tube thickness in petroleum refineries, 6th edn., American Petroleum Institute, Washington, DC. [Google Scholar]
  • Energy Institute, (2008) Guidelines for the avoidance of vibration induced fatigue failure in process pipework, 2nd edn, ISBN: 9780852934630, Energy Institute, London. [Google Scholar]
  • Courant R., Hilbert D. (1953) Methods of mathematical physics, Vol. 1, Interscience, Chapter 5, New York. [Google Scholar]
  • Wang D., Friswell M.I., Lei Y. (2006) Maximizing the natural frequency of a beam with an intermediate elastic support, J. Sound Vib. 291, 1229–1238. [CrossRef] [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.