- Carey V.P., Mandrusiak G.D. (1986) Annular film flow boiling of liquids in a partially heated, vertical channel with offset strip fins, Int. J. Heat Mass Transf. 29, 6, 927–939. [CrossRef] [Google Scholar]
- Jiang W.C., Gong J.M., Tu S.T. (2010) A new cooling method for vacuum brazing of a stainless steel plate-fin structure, Mater. Des. 31, 1, 648–653. [CrossRef] [Google Scholar]
- Jiang W.C., Chen H., Gong J.M., Tu S.T. (2011a) Numerical modelling and nanoindentation experiment to study the brazed residual stresses in an X-type lattice truss sandwich structure, Mater. Sci. Eng. A 528, 13, 4715–4722. [CrossRef] [Google Scholar]
- Jiang W.C., Wang B.Y., Gong J.M., Tu S.T. (2011b) Finite element analysis of the effect of welding heat input and layer number on residual stress in repair welds for a stainless steel clad plate, Mater. Des. 32, 5, 2851–2857. [CrossRef] [Google Scholar]
- Jiang W., Yang B., Gong J.M., Tu S.T. (2011c) Effects of clad and base metal thickness on residual stress in the repair weld of a stainless steel clad plate, J. Press. Vessel. Technol. −Trans. ASME 133, 6, 061401. [CrossRef] [Google Scholar]
- Jiang W.C., Zhang Y.C., Woo W. (2012) Using heat sink technology to decrease residual stress in 316L stainless steel welding joint: Finite element simulation, Int. J. Press. Vessel. Pip. 92, 56–62. [CrossRef] [Google Scholar]
- Khan K.A., Barello R., Muliana A.H., Levesque M. (2011) Coupled heat conduction and thermal stress analyses in particulate composites, Mech. Mater. 43, 10, 608–625. [CrossRef] [Google Scholar]
- Kuznetsov V.V., Shamirzaev A.S. (2007) Boiling heat transfer for freon R21 in rectangular minichannel, Heat Transf. Eng. 28, 8, 738–745. [Google Scholar]
- Ligterink N.E., Hageraats-Ponomareva S.V., Velthuis J.F.M. (2012) Mechanical integrity of PFHE in LNG liquefaction process, in: Barrio M., Venvik H.J. (eds), 2nd Trondheim Gas Technology Conference, pp. 49–55. [Google Scholar]
- Liu Z., Winterton R. (1991) A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling equation, Int. J. Heat Mass Transf. 34, 11, 2759–2766. [CrossRef] [Google Scholar]
- Ma H., Cai W., Zheng W., Chen J., Yao Y., Jiang Y. (2014) Stress characteristics of plate-fin structures in the cool-down process of LNG heat exchanger, J. Nat. Gas Sci. Eng. 21, 1113–1126. [CrossRef] [Google Scholar]
- Ma H., Cai W., Yao Y., Jiang Y. (2016a) Investigation on stress characteristics of plate-fin structures in the heat-up process of LNG heat exchanger, J. Nat. Gas Sci. Eng. , 30, 256–267. [CrossRef] [Google Scholar]
- Ma H., Hou C., Yang R., Li C., Ma B., Ren J., Liu Y. (2016b) The influence of structure parameters on stress of plate-fin structures in LNG heat exchanger, J. Nat. Gas Sci. Eng. 34, 85–99. [CrossRef] [Google Scholar]
- Manglik R.M., Bergles A.E. (1995) Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger, Exp. Therm. Fluid Sci. 10, 2, 171–180. [CrossRef] [Google Scholar]
- Mizokami Y., Igari T., Kawashima F., Sakakibara N., Tanihira M., Yuhara T., Hiroe T. (2013) Development of structural design procedure of plate-fin heat exchanger for HTGR, Nucl. Eng. Des. 255, 248–262. [CrossRef] [Google Scholar]
- Picard F., Averous D., Joulia X., Barreteau D. (2006) Modelling and dynamic simulation of thermal stresses in brazed plate-fin heat exchanger, 16th European Symposium on Computer Aided Process Engineering and 9th International Symposium on Process Systems Engineering, Vol. 21, pp. 659–664. [CrossRef] [Google Scholar]
- Zhao N., Yang Y.Q., Han M., Luo X., Feng G.H., Zhang R.J. (2012) Finite element analysis of pressure on 2024 aluminum alloy created during restricting expansion-deformation heat-treatment, Trans. Nonferrous Met. Soc. China 22, 9, 2226–2232. [Google Scholar]
Open Access
Issue |
Oil & Gas Science and Technology - Rev. IFP Energies nouvelles
Volume 73, 2018
|
|
---|---|---|
Article Number | 13 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.2516/ogst/2018009 | |
Published online | 08 May 2018 |
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.