Open Access
Numéro
Oil & Gas Science and Technology - Rev. IFP Energies nouvelles
Volume 73, 2018
Numéro d'article 13
Nombre de pages 9
DOI https://doi.org/10.2516/ogst/2018009
Publié en ligne 8 mai 2018
  • Carey V.P., Mandrusiak G.D. (1986) Annular film flow boiling of liquids in a partially heated, vertical channel with offset strip fins, Int. J. Heat Mass Transf. 29, 6, 927–939. [CrossRef] [Google Scholar]
  • Jiang W.C., Gong J.M., Tu S.T. (2010) A new cooling method for vacuum brazing of a stainless steel plate-fin structure, Mater. Des. 31, 1, 648–653. [CrossRef] [Google Scholar]
  • Jiang W.C., Chen H., Gong J.M., Tu S.T. (2011a) Numerical modelling and nanoindentation experiment to study the brazed residual stresses in an X-type lattice truss sandwich structure, Mater. Sci. Eng. A 528, 13, 4715–4722. [CrossRef] [Google Scholar]
  • Jiang W.C., Wang B.Y., Gong J.M., Tu S.T. (2011b) Finite element analysis of the effect of welding heat input and layer number on residual stress in repair welds for a stainless steel clad plate, Mater. Des. 32, 5, 2851–2857. [CrossRef] [Google Scholar]
  • Jiang W., Yang B., Gong J.M., Tu S.T. (2011c) Effects of clad and base metal thickness on residual stress in the repair weld of a stainless steel clad plate, J. Press. Vessel. Technol. −Trans. ASME 133, 6, 061401. [CrossRef] [Google Scholar]
  • Jiang W.C., Zhang Y.C., Woo W. (2012) Using heat sink technology to decrease residual stress in 316L stainless steel welding joint: Finite element simulation, Int. J. Press. Vessel. Pip. 92, 56–62. [CrossRef] [Google Scholar]
  • Khan K.A., Barello R., Muliana A.H., Levesque M. (2011) Coupled heat conduction and thermal stress analyses in particulate composites, Mech. Mater. 43, 10, 608–625. [CrossRef] [Google Scholar]
  • Kuznetsov V.V., Shamirzaev A.S. (2007) Boiling heat transfer for freon R21 in rectangular minichannel, Heat Transf. Eng. 28, 8, 738–745. [CrossRef] [Google Scholar]
  • Ligterink N.E., Hageraats-Ponomareva S.V., Velthuis J.F.M. (2012) Mechanical integrity of PFHE in LNG liquefaction process, in: Barrio M., Venvik H.J. (eds), 2nd Trondheim Gas Technology Conference, pp. 49–55. [Google Scholar]
  • Liu Z., Winterton R. (1991) A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling equation, Int. J. Heat Mass Transf. 34, 11, 2759–2766. [CrossRef] [Google Scholar]
  • Ma H., Cai W., Zheng W., Chen J., Yao Y., Jiang Y. (2014) Stress characteristics of plate-fin structures in the cool-down process of LNG heat exchanger, J. Nat. Gas Sci. Eng. 21, 1113–1126. [CrossRef] [Google Scholar]
  • Ma H., Cai W., Yao Y., Jiang Y. (2016a) Investigation on stress characteristics of plate-fin structures in the heat-up process of LNG heat exchanger, J. Nat. Gas Sci. Eng. , 30, 256–267. [CrossRef] [Google Scholar]
  • Ma H., Hou C., Yang R., Li C., Ma B., Ren J., Liu Y. (2016b) The influence of structure parameters on stress of plate-fin structures in LNG heat exchanger, J. Nat. Gas Sci. Eng. 34, 85–99. [CrossRef] [Google Scholar]
  • Manglik R.M., Bergles A.E. (1995) Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger, Exp. Therm. Fluid Sci. 10, 2, 171–180. [CrossRef] [Google Scholar]
  • Mizokami Y., Igari T., Kawashima F., Sakakibara N., Tanihira M., Yuhara T., Hiroe T. (2013) Development of structural design procedure of plate-fin heat exchanger for HTGR, Nucl. Eng. Des. 255, 248–262. [CrossRef] [Google Scholar]
  • Picard F., Averous D., Joulia X., Barreteau D. (2006) Modelling and dynamic simulation of thermal stresses in brazed plate-fin heat exchanger, 16th European Symposium on Computer Aided Process Engineering and 9th International Symposium on Process Systems Engineering, Vol. 21, pp. 659–664. [CrossRef] [Google Scholar]
  • Zhao N., Yang Y.Q., Han M., Luo X., Feng G.H., Zhang R.J. (2012) Finite element analysis of pressure on 2024 aluminum alloy created during restricting expansion-deformation heat-treatment, Trans. Nonferrous Met. Soc. China 22, 9, 2226–2232. [CrossRef] [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.