IFP Energies nouvelles International Conference: LES4ICE 2014 – Large-Eddy Simulation for Internal Combustion Engine Flows
Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 71, Number 1, January–February 2016
IFP Energies nouvelles International Conference: LES4ICE 2014 – Large-Eddy Simulation for Internal Combustion Engine Flows
Article Number 4
Number of page(s) 24
DOI https://doi.org/10.2516/ogst/2015024
Published online 22 January 2016
  • Alajbegovic A. (1999) Three-Dimensional Cavitation Calculations in Nozzles, Second Annual Meeting of the Institute for Multifluid Science and Technology, Santa Barbara, CA, March 14-18, pp. 97–103.
  • Ameen M.M., Yang X., Kuo T.W., Xue Q., Som S. (2015) LES for Simulating the Gas Exchange Process in a Spark Ignition Engine, ASME paper number ICEF2015-1002, submitted to ASME ICEF2015, Houston, TX, USA, Nov.
  • Arcoumanis C., Flora H., Gavaises M., Badami M. (2000) Cavitation in Real-Size Multi-Hole Diesel Injector Nozzles, SAE Technical Paper, 2000-01-1249.
  • Arienti M., Sussman M. (2014) An embedded level set method for sharp-interface multiphase simulations of Diesel injectors, International Journal of Multiphase Flow 59, 1–14. [CrossRef] [MathSciNet]
  • Battistoni M., Som S., Longman D.E. (2014a) Comparison of Mixture and Multifluid Models for In-Nozzle Cavitation Prediction, J. Eng. Gas Turbines Power 136, 6, 061506-061506-12, GTP-13-1436. [CrossRef]
  • Battistoni M., Kastengren A.L., Powell C.F., Som S. (2014b) Fluid Dynamics Modeling of End-of-Injection Process, Proceedings of ILASS Americas, Portland OR.
  • Battistoni M., Duke D.J., Swantek A.B., Tilocco F.Z., Powell C.F., Som S. (2015) Effects of Noncondensable Gas on Cavitating Nozzles, Atomization and Sprays 25, 6, 453–483. [CrossRef]
  • Bianchi G., Minelli F., Scardovelli R., Zaleski S. (2007) 3D Large Scale Simulation of the High-Speed Liquid Jet Atomization, SAE Technical Paper 2007-01-0244.
  • Bilicki Z., Kestin J. (1990) Physical aspects of the relaxation model in two-phase flow, Proc. Roy. Soc. Lond. A. 428, 379–397. [CrossRef]
  • Bode M., Diewald F., Broll D.O., Heyse J.F., Le Chenadec V., Pitsch H. (2014) Influence of the Injector Geometry on Primary Breakup in Diesel Injector Systems, SAE Technical Paper 2014-01-1427.
  • Brackbill J.U., Kothe D.B., Zemach C. (1992) A Continuum Method for Modeling Surface Tension, Journal of Computational Physics 100, 335–354. [CrossRef] [MathSciNet]
  • Brennen C.E. (1995) Cavitation and Bubble Dynamics, Oxford University Press.
  • Bruneaux G. (2005) Mixing Process in High Pressure Diesel Jets by Normalized Laser Induced Exciplex Fluorescence Part I: Free Jet, SAE Technical Paper 2005-01-2100.
  • Brusiani F., Bianchi G. (2008) LES Simulation of ICE Non-Reactive Flows in Fixed Grids, SAE Technical Paper 2008-01-0959.
  • Celik I.B., Cehreli Z.N., Yavuz I. (2005) Index of Resolution Quality for Large Eddy Simulations, ASME Journal of Fluids Engineering 127, 5, 949–958. [CrossRef]
  • Crua C., Shoba T., Heikal M., Gold M., Higham C. (2010) High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup, SAE Technical Paper 2010-01-2247.
  • Davidson L. (2009) Large eddy simulations: How to evaluate resolution, Int. J. Heat Fluid Flow 30, 1016–1025. [CrossRef]
  • Demoulin F.X., Beau P.A., Blokkeel G., Mura A., Borghi R. (2007) A new model for turbulent flows with large density fluctuations: Application to liquid atomization, Atomization and Sprays 17, 4, 315–345. [CrossRef]
  • Downar-Zapolski P., Bilicki Z., Bolle L., Franco J. (1996) The non-equilibrium relaxation model for one-dimensional flashing liquid flow, Int. J. of Multiphase Flow 22, 3, 473–483. [CrossRef]
  • Eagle W.E., Musculus M.P. (2014) Cinema-stereo imaging of fuel dribble after the end of injection in an optical heavy-duty Diesel engine, Thiesel Conference Proceedings, Valencia.
  • Gorokhovski M., Herrmann M. (2008) Primary atomizing modeling, Annu. Rev. Fluid Mech. 40, 343–366. [CrossRef]
  • Habchi C. (2014) A Gibbs Energy Relaxation Model (GERM) for Cavitation Simulation, Atomization and Sprays 25, 4, 317–334. [CrossRef]
  • Hu B., Musculus M., Oefelein J. (2010) Large Eddy Simulation of a Transient Air Jet with Emphasis on Entrainment during Deceleration, SAE Technical Paper 2010-01-1133.
  • Issa R.I. (1986) Solution of the implicitly discretised fluid flow equations by operator-splitting, J. Comput. Phys. 62, 40–65. [CrossRef]
  • Kastengren A.L., Powell C.F., Wang Y.-J., Wang J. (2008) Study of Diesel Jet Variability Using Single-Shot X-Ray Radiography, ASME J. Eng. Gas Turb. Power 032811-1.
  • Kastengren A.L., Tilocco F.Z., Duke D., Powell C.F., Zhang X., Moon S. (2014) Time-resolved X-ray radiography of sprays from Engine Combustion Network spray A Diesel injectors, Atomization and Sprays 24, 3, 251–272. [CrossRef]
  • Musculus M. (2009) Entrainment waves in decelerating transient turbulent jets, J. Fluid Mech. 638, 117–140. [CrossRef]
  • Musculus M.P.B., Miles P.C., Pickett L.M. (2013) Conceptual Models for Partially Premixed Low-Temperature Diesel Combustion, Progress in Energy and Combustion Science 39, 2-3, 246–283. [CrossRef]
  • Oefelein J., Lacaze G., Dahms R., Ruiz A., Misdariis A. (2014) Effects of Real-Fluid Thermodynamics on High-Pressure Fuel Injection Processes, SAE Int. J. Engines 7, 3, 1125–1136. [CrossRef]
  • Pickett L., Manin J., Payri R., Bardi M., Gimeno J. (2013) Transient Rate of Injection Effects on Spray Development, SAE Technical Paper 2013-24-0001.
  • Piscaglia F., Montorfano A., Onorati A., Brusiani F. (2014) Boundary Conditions and SGS Models for LES of Wall-Bounded Separated Flows: An Application to Engine-Like Geometries, Oil & Gas Science and Technology – Rev. IFP Energies nouvelles 69, 1, 11–27. [CrossRef] [EDP Sciences]
  • Pomraning E., Rutland C.J. (2002) A Dynamic One-Equation Non-Viscosity LES Model, AIAA Journal 40, 4, 659–701. [CrossRef]
  • Pope S.B. (2000) Turbulent Flows, Cambridge University Press. [CrossRef]
  • Pope S.B. (2004) Ten questions concerning the large-eddy simulation of turbulent flows, New Journal of Physic 6, 35. [CrossRef]
  • Quan S., Dai M., Pomraning E., Senecal P.K., Richards K., Som S., Skeen S., Manin J., Pickett L.M. (2014) Numerical Simulations of Supersonic Diesel Spray Injection and the Induced Shock Waves, SAE Int. J. Engines 7, 2, 1054–1060. [CrossRef]
  • Rhie C.M., Chow W.L. (1983) A numerical study of the turbulent flow past an isolated airfoil with trailing edge separation, AIAA 21, 11, 1525–1532. [NASA ADS] [CrossRef]
  • Schmidt D.P., Gopalakrishnan S., Jasak H. (2010) Multidimensional simulation of thermal non-equilibrium channel flow, Int. J. of Multiphase Flow 36, 284–292. [CrossRef]
  • Senecal P.K., Richards K., Pomraning E., Yang T. (2007) A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations, SAE Technical Paper 2007-01-0159.
  • Senecal P.K., Pomraning E., Richards K., Som S. (2013) An Investigation of Grid Convergence for Spray Simulations using an LES Turbulence Model, SAE Technical Paper 2013-01-1083.
  • Senecal P.K., Pomraning E., Xue Q., Som S., Banerjee S., Hu B., Liu K., Deur J. (2014) Large Eddy simulation of vaporizing sprays considering multi-injection averaging and grid-convergent mesh resolution, ASME Journal of Engineering for Gas Turbine and Power 136, 11, 111504: 1–13. [CrossRef]
  • Som S., D’Errico G., Longman D., Lucchini T. (2012a) Comparison and Standardization of Numerical Approaches for the Prediction of Non-reacting and Reacting Diesel Sprays, SAE Technical Paper 2012-01-1263.
  • Som S., Longman D.E., Luo Z., Plomer M., Lu T., Senecal P.K., Pomraning E. (2012b) Simulating flame lift-off characteristics of Diesel and biodiesel fuels using detailed chemical-kinetic mechanisms, ASME Journal of Energy Resources Technology 134, 3, 032204. [CrossRef]
  • Stetsyuk V., Crua C., Pearson R., Gold M. (2014) Direct imaging of primary atomization in the near-nozzle region of Diesel sprays, Proceedings of ILASS Europe, Bremen, Germany.
  • Swantek A.B., Duke J.D., Sovis N., Tilocco F.Z., Powell C.F., Kastengren A.L. (2013) End of Injection Behavior in Single Hole Diesel Fuel Injectors, Advanced Engine Combustion (AEC) Meeting, Southfield, MI.
  • Swantek A.B., Duke J.D., Tilocco F.Z., Sovis N., Powell C.F., Kastengren A.L. (2014) End of Injection, Mass Expulsion Behaviors in Single Hole Diesel Fuel Injectors, Proceedings of ILASS Americas, Portland OR.
  • Vallet A., Burluka A.A., Borghi R. (2001) Development of a Eulerian Model for the ‘Atomization’ of a Liquid Jet, Atomization and Sprays 11, 619–642. [CrossRef]
  • Wang D.M., Greif D. (2006) Progress in Modeling Injector Cavitating Flows with a Multi-Fluid Method, ASME Paper No. FEDSM2006-98501.
  • Wang Y., Qiu L., Reitz R.D., Diwakar R. (2014) Simulating cavitating liquid jets using a compressible and equilibrium two-phase flow solver, International Journal of Multiphase Flow 63, 52–67. [CrossRef] [MathSciNet]
  • Werner H., Wengle H. (1991) Large Eddy Simulation of Turbulent Flow Over and Around a Cube in a Plane Channel, Proceedings of Eighth Symposium Turbulent Shear Flows.
  • Xiao H., Wang J., Jenny P. (2014) Dynamic Evaluation of Mesh Resolution and Its Application in Hybrid LES/RANS Methods, Flow Turbulence Combust 93, 141–170. [CrossRef]
  • Xue Q., Som S., Senecal P.K., Pomraning E. (2013) Large Eddy Simulation of Fuel Spray Under Non-Reacting IC Engine Conditions, Atomization and Sprays 23, 10, 925–955. [CrossRef]
  • Xue Q., Battistoni M., Som S., Quan S., Senecal P.K., Pomraning E., Schmidt D. (2014) Eulerian CFD Modeling of Coupled Nozzle Flow and Spray with Validation Against X-Ray Radiography Data, SAE Int. J. Engines 7, 2, 1061–1072. [CrossRef]
  • Xue Q., Battistoni M., Powell C.F., Longman D.E., Quan S., Pomraning E., Senecal P.K., Schmidt D.P., Som S. (2015) An Eulerian CFD Model and X-ray Radiography for Coupled Nozzle Flow and Spray in Internal Combustion Engines, International Journal of Multiphase Flow 70, 77–88. [CrossRef]
  • Yu R., Kuo T., Shahed S., Chang T. (1983) The Effect of Mixing Rate, End of Injection, and Sac Volume on Hydrocarbon Emissions from a D.I, Diesel Engine, SAE Technical Paper 831294.
  • Zhao H., Quan S., Dai M., Pomraning E., Senecal P.K., Xue Q., Battistoni M., Som S. (2014) Validation of Three-Dimensional Internal Nozzle Flow Including Automatic Mesh Generation and Cavitation Effects, ASME J. Eng. Gas Turbines Power 136, 9, 092603–092603-10, GTP-14-1111. [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.