Dossier: Fluids-Polymers Interactions: Permeability, Durability
Open Access
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 70, Number 2, March–April 2015
Dossier: Fluids-Polymers Interactions: Permeability, Durability
Page(s) 237 - 249
Published online 17 December 2013
  • Garmabi H., Demarquette N.R., Kamal M.R. (1998) Effect of temperature and compatibilizer on interfacial tension of PE/PA-6 and PP/EVOH, Int. Polym. Process. 13, 1833–1911. [CrossRef]
  • Yeh J.T., Shih W.H., Huang S.S. (2002) Paint solvent permeation resistance of polyethylene, polyethylene/polyamide and polyethylene/modified polyamide bottles, Macromol. Mater. Eng. 287, 23–30. [CrossRef]
  • Correa C.A., Carvalho C.L., Bezzan A.L., Razzino C.A., Hage E. (2006) Structure property relationships in PA6 and PP copolymers blended by single and twin screw extrusion, Int. Polym. Proc. 21, 5, 440–448.
  • Dencheva N., Nunes T., Oliveira A.J., Denchev Z. (2005) Microfibrillar composites based on polyamide/polyethylene blends. 1. Structure investigations in oriented and isotropic polyamide 6, Polymer 46, 3, 887–901. [CrossRef]
  • Holsti-Miettinen R.M., Perttiä K.P., Seppälä J.V., Heino M.T. (1995) Oxygen barrier properties of polypropylene/polyamide 6 blends, J. Appl. Polym. Sci. 58, 1551–1560. [CrossRef]
  • Eceolaza S., Iriarte M., Uriarte C., Etxeberria A. (2009) Barrier property enhancement of polyamide 6 by blending with a polyhydroxyamino-ether resin, J. Polym. Sci. B: Polym. Phys. 47, 1625–1634. [CrossRef]
  • Guerrica-Echevarria G., Eguiazabal J.I., Nazabal J. (2003) Water sorption in polyamide 6/poly(amino-ether) blends. II. Mechanical behaviour, J. Macromol. Sci. Pure Appl. Chem. 40, 7, 705–714. [CrossRef]
  • Lafitte G., Espuche E., Gérard J.F. (2011) Polyamide 11 / Poly(Hydroxy Amino Ether) Blends: Influence of the blend composition and morphology on the barrier and mechanical properties, Eur. Polym. J. 47, 10, 1994–2002.
  • Wang B.B., Hao L.X., Wang W., Hu G.S. (2010) One step compatibilization of polyamide 6/poly(ethylene-1-octene) blends with maleic anhydride and peroxide, J. Polym. Res. 17, 6, 821–826. [CrossRef]
  • Jeziorska R. (2005) Reactive compatibilization of polyester elastomer/polyamide 6 blends with oxazoline functionalized low-density polyethylene, Polimery 50, 4, 291–297.
  • Monticciolo A., Cassagnau P., Michel A. (1998) Fibrillar morphology development of PE/PBT blends: rheology and solvent permeability, Polym. Eng. Sci. 38, 1, 1882–1888. [CrossRef]
  • Sarkissova M., Harrats C., Groeninckx G., Thomas S. (2004) Design and characterisation of microfibrillar reinforced composite materials based on PET/PA12 blends, Composites: Part A 35, 489–499. [CrossRef]
  • Evstatiev M., Schultz J.M., Fakirov S., Friedrich K. (2001) In situ fibrillar reinforced PET/PA-6/Pa-66 blend, Polym. Eng. Sci. 41, 2, 192–204. [CrossRef]
  • Sun L., Boo W.J., Sue H., Clearfield A. (2007) Preparation of alpha-zirconium phosphate nanoplatelets whit wide variations in aspect ratios, New J. Chem. 31, 39–43. [CrossRef]
  • Xu B., Zheng Q., Song Y., Shangguan Y. (2006) Calculating barrier properties of polymer/clay nanocomposites: Effects of clay layers, polymer 47, 2904–2910. [CrossRef]
  • Yano K., Usuki A., Okada A. (1997) Synthesis and properties of polyimide-clay hybrid films, J. Polym. Sci. A: Polym. Chem. 35, 2493–2498. [CrossRef]
  • Murase S., Inoue A., Miyashita Y., Kimura N., Nishio Y. (2002) Structural Characteristics and Moisture Sorption Behavior of Nylon6/Clay Hybrid Films, J. Polym. Sci. B: Polym. Phys. 40, 479–487. [CrossRef]
  • Deguchi R., Nishio T., Okada A. (1993) Process for preparing a polyamide composite material, US Patent 5248720.
  • Hasegawa N., Okamoto H., Kato M., Usuki A., Sato N. (2003) Nylon6/Na-montmorillonite nanocomposites prepared by compounding nylon 6 with Na-montmorillonite slurry, Polymer 44, 2933–2937. [CrossRef]
  • Leaversuch R. (2001) Nanocomposites broaden roles in automotive, barrier packaging, Plastics Technol. 47, 10–19.
  • Picard E., Vermogen A., Gérard J.F., Espuche E. (2007) Barrier properties of nylon 6-montmorillonite nanocomposite membranes prepared by melt blending: influence of the clay content and dispersion state. Consequences on modelling, J. Membr. Sci. 292, 133–144. [CrossRef]
  • Alexandre B., Colasse L., Langevin D., Médéric T., Aubry T., Chappey C., Marais S. (2010) Transport mechanisms of small molecules through polyamide 12/montmorillonite nanocomposites, J. Phys. Chem. B 114, 8827–8837. [CrossRef] [PubMed]
  • Picard E., Gérard J.F., Espuche E. (2008) Water transport properties of polyamide 6 based nanocomposites prepared by melt blending: on the importance of the clay dispersion state on the water transport properties at high water activity, J. Membr. Sci. 313, 1-2, 284–295. [CrossRef]
  • Alix S., Follain N., Tenn N., Alexandre B., Bourbigot S., Soulestin J., Marais S. (2012) Effect of highly exfoliated and oriented organoclays on the barrier properties of polyamide 6 based nanocomposites, J. Phys. Chem. Chem. C 116, 8, 4937–4947. [CrossRef]
  • Zulfiqar S., Ishaq M., Sarwar M.I. (2008) Effect of surface modification of montmorillonite on the properties of aromatic polyamide/clay nanocomposites, Surf. Interface Anal. 40, 8, 1195–1201. [CrossRef]
  • Carvalho J.W.C., Sarantopoulos C., Innocentini-Mei L.H. (2010) Nanocomposites-based polyolefins as alternative to improve barrier properties, J. Appl. Polym. Sci. 118, 3695–3700. [CrossRef]
  • Hong S.I., Rhim J.W. (2012) Preparation and properties of melt-intercalated linear low density polyethylene/Clay nanocomposite films prepared by blow extrusion, Food Sci. Technol. 48, 1, 43–51.
  • Waché R. (2004) Formulation et caractérisation de polyéthylènes charges avec des argyles. Propriétés barrière des nanocomposites obtenus, PhD Thesis, Université de Bretagne Occidentale, France.
  • Jacquelot E., Espuche E., Gérard J.F., Duchet J., Mazabraud P. (2006) Morphology and gas barrier properties of polyethylene based nanocomposites, J. Polym. Sci. B: Polym. Phys. 44, 431–440. [CrossRef]
  • Picard E., Vermogen A., Gérard J.F., Espuche E. (2008) Influence of the compatibilizer polarity and molar mass on the morphology and the gas barrier properties of polyethylene/clay nanocomposites, J. Polym. Sci. B: Polym. Phys. 46, 23, 2593–2604. [CrossRef]
  • Durmus A., Woo M., Kasgoz A., Macosko C.W., Tsapatsis M. (2007) Intercalated linear low density polyetrhylene (LLDPE)/clay nanocomposites prepared with oxidized polyethylene as new type compatibiizer: structural, mechanical and barrier properties, Eur. Polym. J. 43, 3737–3749. [CrossRef]
  • Kato M., Okamoto H., Hasegawa N., Tsukigase A., Usuki A. (2003) Preparation and properties of polyethylene-clay hybrids, Polym. Eng. Sci. 43, 1312–1316. [CrossRef]
  • Rupp J.E.P. (2004) Polyethylene-layered silicate nanocomposites, PhD Thesis, Zürich, Switzerland.
  • Sanchez Valdes S., Lopez Quintanilla M.L., Ramirez Vargas E., Medellin Rodriguez F.J., Gutierrez Rodriguez J.M. (2006) Effect of ionomeric compatibilizer on clay dispersion in polyethylene/clay nanocomposites, Macromol. Mater. Eng. 291, 128–136. [CrossRef]
  • Shah R.K., Krishnaswamy R.K., Takahashi S., Paul D.R. (2006) Blown films of nanocomposites prepared from low density polyethylene and a sodium ionomer of poly(ethylene-co-methacrylic acid), Polymer 47, 6187–6201. [CrossRef]
  • Osman M.A., Atallah A. (2004) High-density polyethylene micro and nanocomposite: effect of particle shape, size and surface treatment on polymer cristallinity and gas permeability, Macromol. Rapid Comm. 25, 1540–1544. [CrossRef]
  • Nielsen L.E. (1967) Models for the permeability of filled polymer systems, J. Macromol. Sci. Chem. A 1, 929–942. [CrossRef]
  • Gusev A.A., Lusti H.R. (2001) Rational Design of nanocomposites for barrier applications, Adv. Mater. 13-21, 1641–1643. [CrossRef]
  • Fredrickson G.H., Bicerano J. (1999) Barrier properties of oriented disk composites, J. Chem. Phys. 110-4, 2181–2188. [CrossRef]
  • Lape N.K., Nuxoll E.N., Cussler E.L. (2004) Polydisperse flakes in barrier films, J. Membr. Sci. 236, 29–37. [CrossRef]
  • Bharadwaj R.K. (2001) Modeling the barrier properties of polymer-layered silicate nanocomposite, Macromolecules 34, 9189–9192. [CrossRef]
  • Yang C., Smyrl W.H., Cussler E.L. (2004) Flake alignment in composite coatings, J. Membr. Sci. 231, 1–12. [CrossRef]
  • Gain O., Espuche E., Pollet E., Alexandre M., Dubois Ph (2005) Gas barrier properties of poly (ε−caprolactone)/clay nanocomposites: influence of the morphology and polymer/clay interactions, J. Polym. Sci. B Polym. Phys. 43, 205–214. [CrossRef]
  • Miltner H.E., Assche G.V., Pozsgay A., Pukansky B., Van Mele B. (2006) Restricted chain segment mobility in poly(amide) 6/clay nanocomposites evidenced by quasi-isothermal crystallization, Polymer 47, 826–835. [CrossRef]
  • Adame D., Beall G.W. (2009) Direct measurement of the constrained polymer region in polyamide/clay nanocomposites and the implications for gas diffusion, Appl. Clay Sci. 42, 545–552. [CrossRef]
  • Sabard M., Gouanvé F., Espuche E., Fulchiron R., Seytre G., Trouillet-fonti L., Fillot L.-A. (2012) Influence of film processing conditions on the morphology of polyamide 6: consequences on water and ethanol sorption properties, J. Membr. Sci. 415-416, 670–680. [CrossRef]
  • Beall G.W. (2000) New conceptual model for interpreting nanocomposite behaviour, Pinnavaia T.J., Beall G.W. (Des.), Polymer-clay nanocomposites, Wiley, New York, pp. 267–279.
  • Picard E., Gauthier H., Gérard J.F., Espuche E. (2007) Influence of the interlayer cations on the surface characteristics of montmorillonites. Consequences on the morphology and gas barrier properties of polyethylene/montmorillonites nanocomposites, J. Colloid Interface Sci. 307, 364–376. [CrossRef] [PubMed]
  • Wunderlich B. (1973) A Subsidiary of Harcourt Brace Jovanovich Publishers, Chap IV The defect crystal, in Macromolecular Physics, Vol I Crystal structure, morphology, defects, Academic Press, New York, London, pp. 380–511.
  • Liu L., Qi Z., Zhu X. (1999) Studies on Nylon 6/Clay Nanocomposites by Melt-Intercalation Process, J. Appl. Polym. Sci. 71, 1133–1138. [CrossRef]
  • Boucard S. (2004) Développement de formulations polyoléfines/silicates lamellaires : contrôle de la nanostructuration par la gestion des interactions physico-chimiques et le procédé de mise en œuvre dans le fondu, PhD Thesis, INSA de Lyon, France.

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.