ogst
Home All issues Volume 58 / No 1 (January-February 2003) Oil & Gas Science and Technology - Rev. IFP, 58 1 (2003) 63-78 References
Dossier: Recent Developments in the Field of Automotive Engines and their After-Treatment
Open Access
Issue
Oil & Gas Science and Technology - Rev. IFP
Volume 58, Number 1, January-February 2003
Dossier: Recent Developments in the Field of Automotive Engines and their After-Treatment
Page(s) 63 - 78
DOI https://doi.org/10.2516/ogst:2003005
Published online 01 December 2006
  • Akihiko, K., Urushihara, T., Itoh, T. and Takagi, Y. (1999) Characteristics of Mixture Formation in a Direct-Injection SI Engine with Optimized in-Cylinder Swirl Air Motion. SAE Paper 1999-01-050. [Google Scholar]
  • Fraidl, G. K., Piock, W. F. and Wirth, M. (1996) Gasoline Direct Injection: Actual Trends and Future Strategies for Injection and Combustion Systems. SAE Paper 960465. [Google Scholar]
  • Harada, J., Tomita, T., Mizuno, H., Mashiki, Z. and Ito, Y. (1997) Development of Direct-Injection Gasoline Engine. SAE Paper 970540. [Google Scholar]
  • Kume, T., Iwamoto, Y., Iida, K., Murakami, M., Akishino, K. and Ando, H. (1996) Combustion Control Technologies for Direct Injection SI Engine. SAE Paper 960600. [Google Scholar]
  • Iwamoto, Y., Noma, K., Nakayama, O., Yamauchi, T. and Ando, H. (1997) Development of Gasoline Direct Injection Engines. SAE Paper 970541. [Google Scholar]
  • Takagi, Y., Itoh, T., Muranaka, S.,Iiyama, A., Iwakiri, Y., Urushihara, T. and Naitoh, K. (1998) Simultaneous Attainment of Low Fuel Consumption, High Output Power and Low Exhaust Emissions in Direct-Injection SI Engines. SAE Paper 980149. [Google Scholar]
  • Castagne, M., Cheve, E., Dumas, J.P. and Henriot, S. (2000) Advanced Tools for Analysis of Gasoline Direct Injection Engines. SAE Paper 2000-01-1903. [Google Scholar]
  • Gold, M., Li, G., Sapsford, S. and Stokes, J. (2000) Application of Optical Techniques to the Study of Mixture Preparation in Direct Injection Gasoline Engines and Validation of a CFD Model. SAE Paper 2000-01-0538. [Google Scholar]
  • Münch, K.U., Kramer, H. and Leipertz, A. (1996) Investigation of Fuel Evaporation Inside the Intake of a SI Engine Using LIEF with a New Seed. SAE Paper 961930. [Google Scholar]
  • Fröba, A.P.,Rabenstein, F.,Münch, K.U. and Leipertz, A. (1998) Mixture of TEA and Benzene as a New Seeding Material for the Quantitative Two-Dimensional LIEF Imaging of Vapor and Liquid Fuel Inside SI Engines. Comb. & Flame, 112, 199-209. [CrossRef] [Google Scholar]
  • Deschamps, B., Lessart, P. and Ricordeau, V. (1998) Diagnostics optiques de l’injection directe d’essence. IFP Report 44755. [Google Scholar]
  • Deschamps, B., Ricordeau, V., Depussay, E. and Mounaïm- Rousselle, C. (1999) Combined Catalytic Hot Wires Probe and Fuel-Air-Ratio-Laser Induced-Exciplex Fluorescence Air/Fuel Ratio Measurements at the Spark Location Prior to Ignition in a Stratified GDI Engine. SAE Paper 1999-01-3536. [Google Scholar]
  • Lawrenz, W., Kohler, J., Meier, F., Stolz, W., Wirth, R., Bloss, W.H., Maly, R.R., Wagner, E. and Zahn, M. (1992) Quantitative 2D LIF Measurements of Air/fuel Ratios During the Intake Stroke in a Transparent SI Engine. SAE Paper 922320. [Google Scholar]
  • Lefebvre, A.H. (1989) Atomisation and Sprays, Hemisphere Publishing. [Google Scholar]
  • Le Coz, J.F. (1998) Comparison of Different Drop Sizing Techniques on Direct Injection Gasoline Sprays. 9th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal. [Google Scholar]
  • Lozano, A.,Yip, B. and Hanson, R.K. (1992) Acetone: a Tracer for Concentration Measurements in Gaseous Flows by Planar Laser-Induced Fluorescence. Exp. in Fluids, 13, 369-376. [CrossRef] [Google Scholar]
  • Wagner, V., Ipp, W., Wensing, M. and Leipertz, A. (1999) Fuel Distribution and Mixture Formation Inside a Direct- Injection SI Engine Investigated by 2D Mie and LIEF Techniques. SAE Paper 1999-01-365. [Google Scholar]
  • Strand, T.E., Rothamer, D.A. and Ghandhi, J.B. (2001) Flame Structure Visualization of Stratified Combustion in a DISI Engine Via PLIF. SAE Paper 2001-01-3649. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.