Dossier: Recent Developments in the Field of Automotive Engines and their After-Treatment
Open Access
Numéro
Oil & Gas Science and Technology - Rev. IFP
Volume 58, Numéro 1, January-February 2003
Dossier: Recent Developments in the Field of Automotive Engines and their After-Treatment
Page(s) 63 - 78
DOI https://doi.org/10.2516/ogst:2003005
Publié en ligne 1 décembre 2006
  • Akihiko, K., Urushihara, T., Itoh, T. and Takagi, Y. (1999) Characteristics of Mixture Formation in a Direct-Injection SI Engine with Optimized in-Cylinder Swirl Air Motion. SAE Paper 1999-01-050. [Google Scholar]
  • Fraidl, G. K., Piock, W. F. and Wirth, M. (1996) Gasoline Direct Injection: Actual Trends and Future Strategies for Injection and Combustion Systems. SAE Paper 960465. [Google Scholar]
  • Harada, J., Tomita, T., Mizuno, H., Mashiki, Z. and Ito, Y. (1997) Development of Direct-Injection Gasoline Engine. SAE Paper 970540. [Google Scholar]
  • Kume, T., Iwamoto, Y., Iida, K., Murakami, M., Akishino, K. and Ando, H. (1996) Combustion Control Technologies for Direct Injection SI Engine. SAE Paper 960600. [Google Scholar]
  • Iwamoto, Y., Noma, K., Nakayama, O., Yamauchi, T. and Ando, H. (1997) Development of Gasoline Direct Injection Engines. SAE Paper 970541. [Google Scholar]
  • Takagi, Y., Itoh, T., Muranaka, S.,Iiyama, A., Iwakiri, Y., Urushihara, T. and Naitoh, K. (1998) Simultaneous Attainment of Low Fuel Consumption, High Output Power and Low Exhaust Emissions in Direct-Injection SI Engines. SAE Paper 980149. [Google Scholar]
  • Castagne, M., Cheve, E., Dumas, J.P. and Henriot, S. (2000) Advanced Tools for Analysis of Gasoline Direct Injection Engines. SAE Paper 2000-01-1903. [Google Scholar]
  • Gold, M., Li, G., Sapsford, S. and Stokes, J. (2000) Application of Optical Techniques to the Study of Mixture Preparation in Direct Injection Gasoline Engines and Validation of a CFD Model. SAE Paper 2000-01-0538. [Google Scholar]
  • Münch, K.U., Kramer, H. and Leipertz, A. (1996) Investigation of Fuel Evaporation Inside the Intake of a SI Engine Using LIEF with a New Seed. SAE Paper 961930. [Google Scholar]
  • Fröba, A.P.,Rabenstein, F.,Münch, K.U. and Leipertz, A. (1998) Mixture of TEA and Benzene as a New Seeding Material for the Quantitative Two-Dimensional LIEF Imaging of Vapor and Liquid Fuel Inside SI Engines. Comb. & Flame, 112, 199-209. [CrossRef] [Google Scholar]
  • Deschamps, B., Lessart, P. and Ricordeau, V. (1998) Diagnostics optiques de l’injection directe d’essence. IFP Report 44755. [Google Scholar]
  • Deschamps, B., Ricordeau, V., Depussay, E. and Mounaïm- Rousselle, C. (1999) Combined Catalytic Hot Wires Probe and Fuel-Air-Ratio-Laser Induced-Exciplex Fluorescence Air/Fuel Ratio Measurements at the Spark Location Prior to Ignition in a Stratified GDI Engine. SAE Paper 1999-01-3536. [Google Scholar]
  • Lawrenz, W., Kohler, J., Meier, F., Stolz, W., Wirth, R., Bloss, W.H., Maly, R.R., Wagner, E. and Zahn, M. (1992) Quantitative 2D LIF Measurements of Air/fuel Ratios During the Intake Stroke in a Transparent SI Engine. SAE Paper 922320. [Google Scholar]
  • Lefebvre, A.H. (1989) Atomisation and Sprays, Hemisphere Publishing. [Google Scholar]
  • Le Coz, J.F. (1998) Comparison of Different Drop Sizing Techniques on Direct Injection Gasoline Sprays. 9th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal. [Google Scholar]
  • Lozano, A.,Yip, B. and Hanson, R.K. (1992) Acetone: a Tracer for Concentration Measurements in Gaseous Flows by Planar Laser-Induced Fluorescence. Exp. in Fluids, 13, 369-376. [CrossRef] [Google Scholar]
  • Wagner, V., Ipp, W., Wensing, M. and Leipertz, A. (1999) Fuel Distribution and Mixture Formation Inside a Direct- Injection SI Engine Investigated by 2D Mie and LIEF Techniques. SAE Paper 1999-01-365. [Google Scholar]
  • Strand, T.E., Rothamer, D.A. and Ghandhi, J.B. (2001) Flame Structure Visualization of Stratified Combustion in a DISI Engine Via PLIF. SAE Paper 2001-01-3649. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.