Open Access
Oil & Gas Science and Technology - Rev. IFP Energies nouvelles
Volume 73, 2018
Numéro d'article 55
Nombre de pages 8
Publié en ligne 20 novembre 2018
  • Wang H., Liao X.W., Zhao X. (2014) The influence of CO2 solubility in reservoir water on CO2 flooding and storage of CO2 injection into a water flooded low permeability reservoir, Energ Source Part A: Recovery Utilization Environ. Effects 36, 8, 815–821. [CrossRef] [Google Scholar]
  • Chang H.L., Zhang Z.Q., Wang Q.M., Xu Z.S., Guo Z.D., Sun H.Q. (2006) Advances in polymer flooding and alkaline/surfactant/polymer processes as developed and applied in the People’s Republic of China, J. Pet. Technol. 12, 58, 84–89. [CrossRef] [Google Scholar]
  • Zhu Y., Hou Q., Jian G., Desheng M.A., Zhe W. (2013) Current development and application of chemical combination flooding technique, Petrol. Explor. Dev. 40, 1, 96–103. [CrossRef] [Google Scholar]
  • Mandal A. (2015) Chemical flood enhanced oil recovery: a review, Int. J. Oil Gas Coal. Tech. 9, 3, 241–252. [CrossRef] [Google Scholar]
  • Yu Q., Jiang H., Song Y., Yi Z., Zhang C. (2012) Chemical flooding for enhanced recovery, Energ Source Part A: Recovery Utilization Environ. Effects 34, 5, 478–483. [CrossRef] [Google Scholar]
  • Zhou M., Wang C., Xing T., Li S., Zhang Z., Luo G. (2015) Studies on foam flooding for saline reservoirs after polymer flooding, J. Petrol. Sci. Eng. 135, 410–420. [CrossRef] [Google Scholar]
  • Wang J., Dong M. (2009) Optimum effective viscosity of polymer solution for improving heavy oil recovery, J. Petrol. Sci. Eng. 67, 3, 155–158. [CrossRef] [Google Scholar]
  • Sharma T., Velmurugan N., Patel P., Chon B.H., Sangwai J.S. (2015) Use of oil-in-water pickering emulsion stabilized by nanoparticles in combination with polymer flood for enhanced oil recovery, Pet. sci. technol. 33, 17–18, 1595–1604. [CrossRef] [Google Scholar]
  • Wever D.A.Z., Picchioni F., Broekhuis A.A. (2013) Comblike polyacrylamides as flooding agent in enhanced oil recovery, Ind. Eng. Chem. Res. 52, 46, 16352–16363. [CrossRef] [Google Scholar]
  • Sun L., Wang B., Pu W., Yang H., Shi M. (2015) The Effect of foam stability on foam flooding recovery, Pet. Sci. Technol. 33, 1, 15–22. [CrossRef] [Google Scholar]
  • Wu W.X., Tang J.B., Zhang Z.X. (2013) Selection of oil displacement agent and performance evaluation for foam complex system, Appl. Mech. Mater. 437, 1097–1100. [CrossRef] [Google Scholar]
  • Li Z.M., Liu Z.P. (2011) Experiment study on a novel foam system for enhanced oil recovery, Adv. Mater. Res. 311–313, 396–405. [Google Scholar]
  • Sun Q., Li Z., Wang J., Li S., Jiang L., Zhang C. (2015) Properties of multi-phase foam and its flow behavior in porous media, RSC Adv. 5, 83, 67676–67689. [CrossRef] [Google Scholar]
  • Cheraghian G. (2015) An experimental study of surfactant polymer for enhanced heavy oil recovery using a glass micromodel by adding nanoclay, Pet. Sci. Technol. 33, 13–14, 1410–1417. [CrossRef] [Google Scholar]
  • Hua Z., Lin M., Guo J., Xu F., Li Z., Li M. (2013) Study on plugging performance of cross-linked polymer microspheres with reservoirs pores, J. Petrol. Sci. Eng. 105, 3, 70–75. [CrossRef] [Google Scholar]
  • Zhou M., Zhao J.Z., Pu W.F., Wang X., Yang Y. (2012) Synthesis and characterization of salt resistance hydrogel microspheres by inverse suspension polymerization, E-Polymers No. 084, 1–8. [Google Scholar]
  • Zhou M., Nie X.C., Zhou L., Hou L.T., Zhao J.Z., Wang X., Yang Y. (2017) Study of crosslinked copolymer nanospheres with temperature resistance, salinity resistance, and deep profile control, J. Appl. Polym. Sci. 134, 5, 45131–45138. [CrossRef] [Google Scholar]
  • Lin M., Zhang G., Hua Z., Zhao Q., Sun F. (2015) Conformation and plugging properties of cross-linked polymer microspheres for profile control, Colloids Surf. A Physicochem. Eng. Aspects 477, 49–54. [CrossRef] [Google Scholar]
  • Zhou M., Wang C.W., Xing T.T., Li S.S., Zhang Z., Luo G. (2015) Studies on foam flooding for saline reservoirs after polymer flooding, J. Petrol. Sci. Eng. 135, 6, 410–420. [CrossRef] [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.