ogst
Accueil Tous les numéros Volume 71 / Numéro 4 (Juillet–Août 2016) Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 71 4 (2016) 49 Références
Open Access
Numéro
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 71, Numéro 4, Juillet–Août 2016
Numéro d'article 49
Nombre de pages 18
DOI https://doi.org/10.2516/ogst/2015035
Publié en ligne 20 avril 2016
  • Poola R.B., Ng H.K., Sekar R.R., Baudino J.H., Colucci C.P. (1995) Utilizing Intake-Air Oxygen-Enrichment Technology to Reduce Cold-Phase Emissions, Vol. 104, New York, NY, Society of Automotive Engineers. 15. [Google Scholar]
  • Kajitani S., Clasen E., Campbell S., Rhee K. (1993) Partial-load and Start-up Operations of Spark-ignition Engine with Oxygen Enriched Air, SAE Technical Paper 932802. [Google Scholar]
  • Poola R.B., Sekar R., Ng H.K., Baudino J.H., Colucci C.P. (1996) The effects of oxygen-enriched intake air on FFV exhaust emissions using M85, Argonne National Lab., IL, United States. [Google Scholar]
  • Ng H.K., Sekar R.R., Kraft S.W., Stamper K. (1993) The potential benefits of intake air oxygen enrichment in spark ignition engine powered vehicle, Society of Automotive Engineers. [Google Scholar]
  • Caton J.A. (2005) Use of a cycle simulation incorporating the second law of thermodynamics: results for spark-ignition engines using oxygen enriched combustion air, SAE Technical Paper 2005-01-1130. [Google Scholar]
  • Poola R.B., Stork K.C., Sekar R., Callaghan K., Nemser S. (1998) Variable Air Composition with Polymer Membrane–A New Low Emissions Tool, SAE Paper 980178. [Google Scholar]
  • Kajitani S., Sava N., McComiskey T., Rhee K. (1992) A spark ignition engine operated by oxygen enriched air, Society of Automotive Engineers. [Google Scholar]
  • Quader A. (1978) Exhaust Emissions and Performance of a Spark Ignition Engine Using Oxygen Enriched Intake Air, Combustion Science and Technology 19, 1–2, 81–86. [CrossRef] [Google Scholar]
  • Mounaïm-Rousselle C., Landry L., Halter F., Foucher F. (2013) Experimental characteristics of turbulent premixed flame in a boosted Spark-Ignition engine, Proceedings of the Combustion Institute 34, 2, 2941–2949. [CrossRef] [Google Scholar]
  • Van Blarigan A., Seiser R., Chen J., Cattolica R., Dibble R. (2012) Working fluid composition effects on methane oxycombustion in an SI-engine: EGR vs. CO2, Proceedings of the Combustion Institute 34, 2, 2951–2958. [CrossRef] [Google Scholar]
  • Favre E., Bounaceur R., Roizard D. (2009) A hybrid process combining oxygen enriched air combustion and membrane separation for post-combustion carbon dioxide capture, Separation and Purification Technology 68, 1, 30–36. [CrossRef] [Google Scholar]
  • Koros W.J., Chern R.T. (1987) Separation of gaseous mixtures using polymer membranes, Handbook of separation process technology, pp. 862–953. [Google Scholar]
  • Coombe H.S., Nieh S. (2007) Polymer membrane air separation performance for portable oxygen enriched combustion applications, Energy Conversion and Management 48, 5, 1499–1505. [CrossRef] [Google Scholar]
  • Richard S., Bougrine S., Font G., Lafossas F.-A., Le Berr F. (2009) On the reduction of 3D CFD combustion model to build a physical 0D model for simulating heat release, knock and pollutants in SI engines, Oil & Gas Science and Technology – Rev. IFP 64, 3, 223–242. [CrossRef] [EDP Sciences] [OGST] [MathSciNet] [Google Scholar]
  • IFP Energies nouvelles (2010) AMESim IFP Engine library user manual, LMS IMAGINE S.A. [Google Scholar]
  • Bougrine S., Richard S., Veynante D. (2011) On the combination of complex chemistry with a 0-D coherent flame model to account for the fuel properties in spark ignition engines simulations: Application to methane-air-diluents mixtures, Proceedings of the Combustion Institute 33, 2, 3123–3130. [CrossRef] [Google Scholar]
  • Bozza F., Gimelli A. (2004) A Comprehensive 1D Model for the Simulation of a Small-Size Two-Stroke SI Engine, SAE Technical Paper 2004-01-0999. [Google Scholar]
  • Richard S., Colin O., Vermorel O., Benkenida A., Angelberger C., Veynante D. (2007) Towards large eddy simulation of combustion in spark ignition engines, Proceedings of the Combustion Institute 31, 2, 3059–3066. [Google Scholar]
  • Colin O., Benkenida A., Angelberger C. (2003) 3d Modeling of Mixing, Ignition and Combustion Phenomena in Highly Stratified Gasoline Engines, Oil & Gas Science and Technology – Rev. IFP 58, 1, 47–62. [CrossRef] [EDP Sciences] [Google Scholar]
  • Charlette F., Meneveau C., Veynante D. (2002) A power-law flame wrinkling model for LES of premixed turbulent combustion Part I: non-dynamic formulation and initial tests, Combustion and Flame 131, 1–2, 159–180. [Google Scholar]
  • Blint R.J. (1986) The Relationship of the Laminar Flame Width to Flame Speed, Combustion Science and Technology 49, 1–2, 79–92. [Google Scholar]
  • Poulos S.G., Heywood J.B. (1983) The effect of chamber geometry on spark-ignition engine combustion, SAE Technical Paper 830334. [Google Scholar]
  • Zhou J.X., Cordier M., Mounaïm-Rousselle C., Foucher F. (2011) Experimental estimate of the laminar burning velocity of iso-octane in oxygen-enriched and CO2-diluted air, Combustion and Flame 158, 12, 2375–2383. [CrossRef] [Google Scholar]
  • Galmiche B., Halter F., Foucher F. (2012) Effects of high pressure, high temperature and dilution on laminar burning velocities and Markstein lengths of iso-octane/air mixtures, Combustion and Flame 159, 11, 3286–3299. [CrossRef] [Google Scholar]
  • Friedman R., Johnston W.C. (1950) The Wall-Quenching of Laminar Propane Flames as a Function of Pressure, Temperature, and Air Fuel Ratio, Journal of Applied Physics 21, 8, 791–795. [CrossRef] [Google Scholar]
  • Mazas A.N., Fiorina B., Lacoste D.A., Schuller T. (2011) Effects of water vapor addition on the laminar burning velocity of oxygen-enriched methane flames, Combustion and Flame 158, 12, 2428–2440. [CrossRef] [Google Scholar]
  • Heywood J. (1994) Combustion and its modeling in spark-ignition engines, in International symposium COMODIA. [Google Scholar]
  • Boulouchos K., Steiner T., Dimopoulos P. (1994) Investigation of flame speed models for the flame growth period during premixed engine combustion, Society of Automotive Engineers. [Google Scholar]
  • Linse D., Hasse C., Durst B. (2009) An experimental and numerical investigation of turbulent flame propagation and flame structure in a turbo-charged direct injection gasoline engine, Combustion Theory and Modelling 13, 1, 167–188. [CrossRef] [Google Scholar]
  • Wirth M. (1993) Die turbulente flammenausbreitung im ottomotor und ihre charakteristischen längenskalen, in RWTH Aachen. [Google Scholar]
  • Poinsot T., Veynante D., Candel S. (1991) Quenching processes and premixed turbulent combustion diagrams, Journal of Fluid Mechanics 228, 561–606, 230. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.