ogst
Home All issues Volume 75 (2020) Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 75 (2020) 49 References
Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 75, 2020
Article Number 49
Number of page(s) 11
DOI https://doi.org/10.2516/ogst/2020046
Published online 21 July 2020
  • Ai S, Cheng L., Huang S., Liu H., Zhang J. (2015) A critical production model for deep HT/HP gas wells, J. Natural Gas Sci. Eng. 22, 132–140. [CrossRef] [Google Scholar]
  • Azzola J.H., Tselepidakis D.P., Pattillo P.D., Richey J.F. (2007) Application of vacuum-insulated tubing to mitigate annular pressure buildup, SPE Drill. Complet. 22, 1, 46–51. [CrossRef] [Google Scholar]
  • Bellarby J., Kofoed S.S., Marketz F. (2013) Annular pressure build-up analysis and methodology with examples from multifrac horizontal wells and HPHT reservoirs, in: Paper SPE 163557 Presented at the SPE/IADC Drilling Conference and Exhibition, Amsterdam, The Netherlands, 5–7 March. [Google Scholar]
  • Bradford D.W., Gibson D.H., Gosch S.W., Pattillo P.D., Sharp J.W., Taylor C.E. (2002) Marlin failure analysis and redesign: part 1 description of failure, in: IADC/SPE Drilling Conference, Dallas, USA, February 26–28. [Google Scholar]
  • Ding L. (2011) Mechanical study of testing string and its application in deep gas well with high pressure and high production, Doctoral Dissertation of Southwest Petroleum University, pp. 18–21. [Google Scholar]
  • Ezell R., Fontenot E.S., Robinson E.F., Cunningham L.E., Patrickis A. (2010) High performance aqueous insulating packer fluid improved flow assurance and reduced annular pressure buildup in ultra deepwater wells, in: SPE Deepwater Drilling and Completions Conference, Galveston, USA, October 5–6. [Google Scholar]
  • Gosch S.W., Horne D.J., Pattillo P.D., Sharp J.W., Shah P.C. (2004) Marlin failure analysis and redesign: part 3 – VIT completion with real-time monitoring, SPE Drill. Complet. 19, 2, 120–128. [CrossRef] [Google Scholar]
  • Halal S., Mitchell R.F. (1994) Casing design for trapped annular pressure buildup, SPE 25694, Society of Petroleum Engineers, pp. 107–114. doi: 10.2118/25694-PA. [Google Scholar]
  • Hasan R., Izgec B., Kabir S. (2010) Sustaining production by managing annular- pressure buildup, SPE Prod. Oper. 25, 2, 195–203. [Google Scholar]
  • Hasan A.R., Kabir C.S. (1991) Heat transfer during two-phase flow in wellbores: part I – formation temperaturein: SPE Annual Technical Conference and Exhibition, Dallas, USA, October 6–9. [Google Scholar]
  • Hu W., Wang J., Zhang W. (2012) Confined annular pressure trap pressure prediction and release technology for deepwater drilling, Sino-glob, Energy 17, 8, 41–45. [Google Scholar]
  • Kan C., Yan J., Yu X., Meng W., Hu N., Zhou B., Zhang B., Hu Z. (2016) Numerical simulation of thermal stress on entrapped pressure of deepwater and further research on anti-thermal-stress casing tools, in: SPE/AAPG Africa Energy and Technology Conference, Society of Petroleum Engineers. [Google Scholar]
  • Oudeman P., Kerem M. (2006) Transient behavior of annular pressure buildup in HP/HT wells, SPE Drill. Complet. 21, 4, 234–241. SPE-88735-PA [CrossRef] [Google Scholar]
  • Pattillo P.D., Cocales B.W., Morey S.C. (2006) Analysis of an annular pressure buildup failure during drill ahead, SPE Drill. Complet. 21, 4, 242–247. [CrossRef] [Google Scholar]
  • Rizkiaputra R., Siregar R., Wibowo T., Mabunga S. (2016) A new method to mitigate annular pressure buildup by using sacrificial casing, case study: a deepwater well in Indonesia, Society of Petroleum Engineers. [Google Scholar]
  • Sathuvalli U.B., Payne M.L., Pattillo P.D., Rahman S., Suryanarayana P.V. (2005) Development of a screening system to identify deepwater wells at risk for annular pressure build-up, in: SPE/IADC Drilling Conference, Amsterdam, Netherlands, February 23–25. [Google Scholar]
  • Tahmourpour F., Hashki K., Hassan H.I.E.l. (2010) Different methods to avoid annular pressure buildup by appropriate engineered sealant and applying best practices (cementing and drilling), SPE Drill. Complet. 25, 2, 248–252. [CrossRef] [Google Scholar]
  • Wang L., Gao B., Gao L., Tianxiang H. (2018) Prediction of annular pressure caused by thermal expansion by considering the variability of fluid properties, Appl. Therm. Eng. 141, 234–244. [Google Scholar]
  • Williamson R., Sanders W., Jakabosky T., Serio M., Grith J.E. (2003) Control of contained-annulus fluid pressure buildup, in: SPE/IADC Drilling Conference, Amsterdam, Netherlands, February 19–21. [Google Scholar]
  • Yang M., Meng Y., Li G., Deng J. (2013a) Effects of the radial temperature gradient and axial conduction of drilling fluid on the wellbore temperature distribution, Acta Phys. Sin. 62, 7, 79–84. [Google Scholar]
  • Yang J., Tang H., Liu Z., Yang L., Huang X., Yan D., Tian R. (2013b) Prediction model of casing annulus pressure for deepwater well drilling and completion operation, Petrol. Explor. Dev. 40, 5, 661–664. [CrossRef] [Google Scholar]
  • Yin F., Gao D. (2014) Improved calculation of multiple annuli pressure buildup in subsea HPHT Wells, in: Paper SPE 170553 Presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, Bangkok, Thailand, 25e27 August. [Google Scholar]
  • Zhang Y., Li Z., Zhang L. (2010) Study on the casing strength of vacuum insulated shaft, Eng. Mech. 27, 5, 179–183. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.