Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 73, 2018
Article Number 65
Number of page(s) 14
DOI https://doi.org/10.2516/ogst/2018062
Published online 28 November 2018
  • Veil J.A., Puder M.G., Elcock D., Elcock D., Redweik, Jr. R.J. (2004) A white paper describing produced water from production of crude oil, natural gas, and coal bed methane (No. ANL/EA/RP-112631), Argonne National Lab, IL, USA. [CrossRef] [Google Scholar]
  • Elsharafi M.O., Bai B. (2012) Effect of weak preformed particle gel on unswept oil zones/areas during conformance control treatments, Ind. Eng. Chem. Res. 51, 35, 11547–11554. [Google Scholar]
  • Wang Y. (2007) Optimization of binary combination oil displacement system after polymer flooding in Shengli Oilfield, Petrol. Drill. Tech. 35, 5, 101–103. [Google Scholar]
  • Bai B., Li L., Liu Y., Liu H., Wang Z., You C. (2007) Preformed particle gel for conformance control: factors affecting its properties and applications, SPE Reserv. Evalu. Eng. 10, 4, 415–422. [CrossRef] [Google Scholar]
  • Wang D. (2014) Some thoughts about potential of oil recovery efficiency and development model transition in Shengli district, Pet. Geol. Recovery Effic. 21, 4, 1–4. [Google Scholar]
  • Liu Z., Wang Q., Sun Y. (2014) Study and application of new technological limit for polymer flooding in field application, Petroleum Geology and Recovery Efficiency 21, 2, 22–24. [Google Scholar]
  • Liu Y., Bai B., Wang Y. (2010) Applied technologies and prospects of conformance control treatments in China, Oil Gas Sci. Technol. - Rev. IFP Energies nouvelles 65, 6, 859–878. [CrossRef] [Google Scholar]
  • Liu X.E. (1995) Development and application of the water control and profile modification technology in China oil fields. SPE 29907, Paper Presented at International Meeting on Petroleum Engineering held in Beijing, China, 14–17 November. [Google Scholar]
  • Qin Y.F., Geng Z.Y., Bo J.Y., Ming Z.Z., Lei G.L., Fu J.Z. (2001) The practice and results of polymer flood programs at Shengli Oil Fields, Oilfield Chem. 18, 2, 148–151. [Google Scholar]
  • Zhang L. (2007) Technical and economic potential for polymer flooding in Shengli Oilfield, Petrol. Explor. Dev. 34, 1, 79–82. [Google Scholar]
  • Wang D., Zhao L., Cheng J., Wu J. (2003) Actual field data show that production costs of polymer flooding can be lower than water flooding. SPE International Improved Oil Recovery Conference in Asia Pacific, Society of Petroleum Engineers. [Google Scholar]
  • Zhang Y., Yue X., Yue X., Dong J., Yu L. (2000, January) New and effective foam flooding to recover oil in heterogeneous reservoir. SPE/DOE Improved Oil Recovery Symposium, Society of Petroleum Engineers. [Google Scholar]
  • Li Z., Zhou G., Zhou Z. (2006) The feasibility studies of polymer foam flooding in Gudao oilfield. SPE Asia Pacific Oil & Gas Conference and Exhibition, Society of Petroleum Engineers. [Google Scholar]
  • Yu L., Sun H.Q., Xiao J.H., Chen H., Song D.F., Zheng L.Q., Li G.Z. (2007) SDCM-1/HPAM surfactant/polymer combinational flooding fluid for further enhanced oil recovery after polymer flood finished, Oilfield Chem. 24, 4, 355–358. [Google Scholar]
  • Al-Anazi H.A., Sharma M.M. (2002, January) Use of a pH sensitive polymer for conformance control. International Symposium and Exhibition on Formation Damage Control, Society of Petroleum Engineers. [Google Scholar]
  • Zhao F.L., Wang Y.F., Dai C.L., Ren S., Jiao C. (2006) Techniques of enhanced oil recovery after polymer flooding, Journal of China University of Petroleum: Edition of Natural Science 30, 1, 86–89. [Google Scholar]
  • Zhang L., Cui X., Ren S. (2010) The study on enhanced oil recovery technology in reservoirs after polymer flooding, Chem. Eng. Oil Gas 39, 2, 144–147+88. [Google Scholar]
  • Farajzadeh R., Andrianov A., Zitha P.L. (2009) Investigation of immiscible and miscible foam for enhancing oil recovery, Ind. Eng. Chem. Res. 49, 4, 1910–1919. [Google Scholar]
  • Gong H., Zhang H., Xu L., Li K., Yu L., San Q., Li Y., Dong M. (2017) The synergistic effect of branched-preformed particle gel and hydrolyzed polyacrylamide on further-enhanced oil recovery after polymer flooding, Energy Fuels 31, 8, 7904–7910. [Google Scholar]
  • Frampton H., Morgan J.C., Cheung S.K., Munson L., Chang K.T., Williams D. (2004, January) Development of a novel waterflood conformance control system. SPE/DOE Symposium on Improved Oil Recovery, Society of Petroleum Engineers. [Google Scholar]
  • Diaz D., Somaruga C., Norman C., Romero J.L. (2008, Jan) Colloidal dispersion gels improve oil recovery in a heterogeneous Argentina waterflood, SPE Symposium on Improved Oil Recovery, Society of Petroleum Engineers. [Google Scholar]
  • Kabir A.H. (2001) Chemical water and gas shutoff technology – an overview. SPE Asia Pacific Improved Oil Recovery Conference and SPE/DOE Symposium on Improved Oil Recovery, Society of Petroleum Engineers. [Google Scholar]
  • Der Sarkissian J., Prado M., Rauseo O., Rauseo O. (2005) Lessons learned from four selective water shutoff treatments in mature reservoirs in Maracaibo Lake. Offshore Europe, Society of Petroleum Engineers. [Google Scholar]
  • Zitha P.L., Darwish M.M. (1999) Effect of bridging adsorption on the placement of gels for water control. SPE Asia Pacific Improved Oil Recovery Conference, Society of Petroleum Engineers. [Google Scholar]
  • Wang Y., Bai B., Gao H., He L., Zhao F. (2008) Enhanced oil production through a combined application of gel treatment and surfactant huff‘n’puff technology. SPE International Symposium and Exhibition on Formation Damage Control, Society of Petroleum Engineers. [Google Scholar]
  • Borling D.C. (1994, January) Injection conformance control case histories using gels at the Wertz Field CO2 tertiary flood in Wyoming. SPE/DOE Improved Oil Recovery Symposium, Society of Petroleum Engineers. [Google Scholar]
  • Sydansk R.D., Southwell G.P. (2000) More than 12 years of experience with a successful conformance-control polymer gel technology. SPE/AAPG Western Regional Meeting, Society of Petroleum Engineers. [Google Scholar]
  • Wouterlood C.J., Falcigno E.D., Gazzera C.E., Norman C.A. (2002) Conformance improvement with low concentration polymer gels in a heterogeneous, multilayer reservoir. SPE/DOE Improved Oil Recovery Symposium, Society of Petroleum Engineers. [Google Scholar]
  • Stavland A., Andersen K.I., Sandoey B., Tjomsland T., Mebratu A.A. (2006) How to apply a blocking gel system for bullhead selective water shutoff: from laboratory to field. SPE/DOE Symposium on Improved Oil Recovery, Society of Petroleum Engineers. [Google Scholar]
  • Chauveteau G., Tabary R., Le Bon C., Renard M., Feng Y., Omari A. (2003) In-depth permeability control by adsorption of soft size-controlled microgels. SPE European Formation Damage Conference, Society of Petroleum Engineers. [Google Scholar]
  • Bai B., Liu Y., Coste J.P., Li L. (2007) Preformed particle gel for conformance control: transport mechanism through porous media, SPE Reserv. Evalu. Eng. 10, 2, 176–184. [CrossRef] [Google Scholar]
  • Goudarzi A., Zhang H., Varavei A., Taksaudom P., Hu Y., Delshad M., Bai B., Sepehrnoori K. (2015) A laboratory and simulation study of preformed particle gels for water conformance control, Fuel 140, 502–513. [CrossRef] [Google Scholar]
  • Coste J.P., Liu Y., Bai B., Li Y., Shen P., Wang Z., Zhu G. (2000) In-depth fluid diversion by pre-gelled particles. Laboratory study and pilot testing. SPE/DOE Improved Oil Recovery Symposium, Society of Petroleum Engineers. [Google Scholar]
  • Bai B., Zhang H. (2011) Preformed-particle-gel transport through open fractures and its effect on water flow, SPE J. 16, 2, 388–400. [CrossRef] [Google Scholar]
  • Zhang H., Challa R.S., Bai B., Tang X., Wang J. (2010) Using screening test results to predict the effective viscosity of swollen superabsorbent polymer particles extrusion through an open fracture, Ind. Eng. Chem. Res. 49, 23, 12284–12293. [Google Scholar]
  • Imqam A., Bai B., Al Ramadan M., Wei M., Delshad M., Sepehrnoori K. (2015) Preformed-particle-gel extrusion through open conduits during conformance-control treatments, SPE J. 20, 5, 1083–1093. [CrossRef] [Google Scholar]
  • Elsharafi M.O., Bai B. (2012) Effect of weak preformed particle gel on unswept oil zones/areas during conformance control treatments, Ind. Eng. Chem. Res. 51, 35, 11547–11554. [Google Scholar]
  • Bai B., Li L., Liu Y., Liu H., Wang Z., You C. (2007) Preformed particle gel for conformance control: factors affecting its properties and applications, SPE Reserv. Evalu. Eng. 10, 4, 415–422. [CrossRef] [Google Scholar]
  • Xie Q., Pu W., Xing Y. (2006) Experimental study on seal-off behavior of pre-crosslinked gel, Spec. Oil Gas Reserv. 13, 4, 92–93. [Google Scholar]
  • Cui X. (2011) A study on the heterogeneous combination flooding system, Acta Petrolei Sinica 32, 1, 122–126. [Google Scholar]
  • Sang Q., Li Y., Yu L., Li Z., Dong M. (2014) Enhanced oil recovery by branched-preformed particle gel injection in parallel-sandpack models, Fuel 136, 295–306. [CrossRef] [Google Scholar]
  • Yu L., Li Y., Gong H., Sang Q., Li K., Dong M. (2016) EOR of branched-preformed particle gel (B-PPG) flooding after polymer flooding in heterogeneous reservoirs, Petroleum Geology and Recovery Efficiency 23, 1, 113–118. [Google Scholar]
  • Gong H., Zhang H., Xu L., Li K., Yu L., Li Y., Dong M. (2017) Further enhanced oil recovery by branched-preformed particle gel/HPAM/surfactant mixed solutions after polymer flooding in parallel-sandpack models, RSC Adv. 7, 63, 39564–39575. [Google Scholar]
  • Gong H., Zhang H., Xu L., Li K., Yu L., San Q., Li Y., Dong M. (2017) The synergistic effect of branched-preformed particle gel and hydrolyzed polyacrylamide on further-enhanced oil recovery after polymer flooding, Energy Fuels 31, 8, 7904–7910. [Google Scholar]
  • Seright R.S. (1988, January) Placement of gels to modify injection profiles. SPE Enhanced Oil Recovery Symposium, Society of Petroleum Engineers. [Google Scholar]
  • Liu Y., Liu J., Li X. (2001) Application of pre-crosslinked gel particles to depth profile control, Petroleum Geology and Recovery Efficiency 8, 3, 65–66. [Google Scholar]
  • Alvarado D., Marsden, Jr. SS (1979) Flow of oil-in-water emulsions through tubes and porous media, SPE J. 19, 6, 369–377. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.