Dossier: Thermal analysis and calorimetry techniques applied to the characterization of materials and fluids for energy
Open Access
Issue
Oil & Gas Science and Technology - Rev. IFP Energies nouvelles
Volume 73, 2018
Dossier: Thermal analysis and calorimetry techniques applied to the characterization of materials and fluids for energy
Article Number 64
Number of page(s) 15
DOI https://doi.org/10.2516/ogst/2018012
Published online 30 November 2018
  • Annual Energy Outlook (2013) The U.S. Energy Information Administration (EIA), Washington, DC. [Google Scholar]
  • Huber G.W., Iborra S., Corma A. (2006) Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering, Chem. Rev. 106, 4044–4098. [CrossRef] [PubMed] [Google Scholar]
  • Alonso D.M., Bond J.Q., Dumesic J.A. (2010) Catalytic conversion of biomass to biofuels, Green Chem. 12, 1493–1513. [Google Scholar]
  • Wilson K., Lee A.F. (2013) Heterogeneous Catalysts for Clean Technology: Design, Analysis and Application, first ed. Wiley-VCH, Weinheim, Germany. [Google Scholar]
  • Van Putten R.J., Van der Waal J.C., de Jong E., Rasrendra C.B., Heeres H.J., de Vries J.G. (2013) Hydroxymethylfurfural, A versatile platform chemical made from renewable resources, Chem. Rev. 113, 1499–1597. [CrossRef] [PubMed] [Google Scholar]
  • Mejia A., Oliveira M.B., Segura H., Cartes M., Coutinho J.A.P. (2013) Isobaric vapor-liquid equilibrium and isothermal surface tensions of 2,2′-oxybis[propane]+2,5-Dimethylfuran, Fluid Phase Equilib. 345, 60–67. [Google Scholar]
  • Mejia A., Segura H., Cartes M., Coutinho J.A.P. (2012) Vapor-liquid equilibrium, densities, and interfacial tensions of the system hexane+2,5-dimethylfuran, J. Chem. Eng. Data 57, 2681–2688. [Google Scholar]
  • Verevkin S.P., Welle F.M. (1998) Thermochemical studies for determination of the standard molar enthalpies of formation of alkyl-substituted furans and some ethers, Struct. Chem. 9, 215–221. [Google Scholar]
  • Mejía A., Segura H., Cartes M. (2014) Experimental determination and theoretical prediction of the vapor-liquid equilibrium and interfacial tensions of the system methyl-tert-butyl ether+2,5-dimethylfuran, Fuel 116, 183–190. [CrossRef] [Google Scholar]
  • Mejía A., Segura H., Cartes M. (2013) Isobaric vapor-liquid equilibrium and isothermal interfacial tensions for the system ethanol+2,5-Dimethylfuran, J. Chem. Eng. Data 58, 3226–3232. [Google Scholar]
  • da Silva J.L., Aznar M. (2014) Thermophysical properties of 2,5-dimethylfuran and liquid-liquid equilibria of ternary systems water+2,5-dimethylfuran+alcohols (1-butanol or 2-butanol or 1-hexanol), Fuel 136, 316–325. [CrossRef] [Google Scholar]
  • Orem H., Sur S.K. (1989) Can. J. Chem. 67 65–85. [Google Scholar]
  • Riddick J.A., Bringer W.B. (1970) Organic Solvents, 3rd Edn. Wiley, New York [Google Scholar]
  • Zorebski E., Waligora A. (2008) Densities, excess molar volumes, and isobaric thermal expansibilities for 1,2-ethanediol+1-butanol, or 1-hexanol, or 1-octanol in the temperature range from (293.15 to 313.15) K, J. Chem. Eng. Data 53, 591–595. [Google Scholar]
  • Bahadur I., Deenadayalu N., Tywabi Z., Sen S., Hofman T. (2012) Volumetric properties of ternary (IL+2-propanol or 1-butanol or 2-butanol+ethyl acetate) systems and binary (IL+2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol+ethyl acetate) systems, J. Chem. Thermodyn. 49, 24–38. [Google Scholar]
  • Riddick J.A., Bunger W.B., Sakano T.K. (1986) Organic solvents: Physical properties and methods of purification, fourth ed., Wiley, New York. [Google Scholar]
  • Iglesias M., Orge B., Tojo J. (1996) Refractive indices, densities and excess properties on mixing of the systems acetone+methanol+water and acetone+methanol+1-butanol at 298.15 K, Fluid Phase Equilib. 126, 203–223. [Google Scholar]
  • Riddick J, Bunger W, Sakano T.K. (1986) Organic Solvents, Wiley/Interscience, New York [Google Scholar]
  • Mokhtarani B., Sharifi A., Mortaheb H.R, Mirzaei M., Mafi M., Sadeghian F. (2009) Density and viscosity of pyridinium-based ionic liquids and their binary mixtures with water at several temperatures, J. Chem. Thermodyn. 41, 1432–1438. [Google Scholar]
  • Aminabhavi T., Benerjee K. (1998) Density, viscosity, refractive index, and speed of sound in binary mixtures of 2-Chloroethanol with Alkanols (C1−C6) at 298.15, 303.15, and 308.15 K, J. Chem. Eng. Data 43, 509–513. [Google Scholar]
  • VIJayalakrhml T.S., NaMu P.R. (1992) Excess volumes of binary mixtures of 1, 2, 4-trichlorobenzene with 1–Aikanois, J. Chem. Eng. Data, 37, 366–369. [Google Scholar]
  • Thermodynamic Tables-Non-hydrocarbons; Thermodynamics Research Center, The Texas ABM University System: College Station, TX (loose-leaf data sheets, extant1988, pd-5000). [Google Scholar]
  • Torres G., Apesteguı́a C.R., Di Cosimo J.I. (2007) Volumetric properties of binary mixtures of acetonitrile and alcohols at different temperatures and atmospheric pressure, J. Mol. Liq. 131–132, 139–144. [Google Scholar]
  • CRC Handbook of Chemistry and Physics, (2004–2005) 85th Edition CRC PRESS. Inc. [Google Scholar]
  • Zaoui-Djelloul-Daouadji M., Bendiaf L., Bahadur I., Negadi A., Ramjugernath D., Ebenso E.E., Negadi L (2015) Volumetric and acoustic properties of binary systems (furfural or furfuryl alcohol+toluene) and (furfuryl alcohol+ethanol) at different temperatures, Thermochim. Acta 611, 47–55. [Google Scholar]
  • Lomba L, Giner B., Bandres I., Lafuente C., Pinoa M.R. (2011) Physicochemical properties of green solvents derived from biomass, Green Chem. 13, 2062–2070. [Google Scholar]
  • Tai W.-P., Lee H.-Y., Lee M.-J. (2014) Isothermal vapor-liquid equilibrium for binary mixtures containing furfural and its derivatives, Fluid Phase Equilib. 384, 134–142. [Google Scholar]
  • Flick E.W. (1998) Industrial Solvents Handbook, 5th ed., Noyes Data Corporation, Westwood, New Jersey, U.S.A, pp. 340. [Google Scholar]
  • Naorem H., Suri S.K. (1993) Molar excess volumes of furfuryl alcohol and aromatic hydrocarbons at 25 °C, J. Solution Chem. 22, 183–189. [Google Scholar]
  • Martínez N.F., Lladosa E., Burguet M., Montón J.B., Yazimon M. (2009) Isobaric vapour-liquid equilibria for the binary systems 4-methyl-2-pentanone+1-butanol and+2-butanol at 20 and 101.3 kPa, Fluid Phase Equilib. 277, 49–54. [Google Scholar]
  • TRC Thermodynamic Tables, Non-Hydrocarbons, Thermodynamics Research Center, NIST/TRC Table Database, Win Table, 2004. [Google Scholar]
  • Bendiaf L., Bahadur I., Negadi A., Naidoo P., Ramjugernath D., Negadi L. (2015) Effects of alkyl group and temperature on the interactions between furfural and alcohol: Insight from density and sound velocity studies, Thermochim. Acta 599, 13–22. [Google Scholar]
  • Nasterlack T., Blottnitz H.V., Wynberg R. (2014) Are biofuel concerns globally relevant? Prospects for a proposed pioneer bioethanol project in South Africa, Energy Sustainable Dev. 23, 1–14. [CrossRef] [Google Scholar]
  • Outcalt S.L., Laesecke A., Fortin T.J. (2010) Density and speed of sound measurements of 1- and 2-butanol, J. Mol. Liq. 151, 50–59. [Google Scholar]
  • Wilson W., Bradley D. (1964) Speed of sound in four primary alcohols as a function of temperature and pressure, J. Acoust. Soc. Am. 36, 333–337. [Google Scholar]
  • Guan W., Chang N., Yang L., Bu X., Wei J., Liu Q. (2017) Determination and Prediction for the Polarity of Ionic Liquids, J. Chem. Eng. Data 62, 2610–2616. [Google Scholar]
  • Varfolomeev M.A., Zaitseva K.V., Rakipov I.T., Solomonov B.N., Marczak W. (2016) Speed of sound, density, and related thermodynamic excess properties of binary mixtures of 2-pyrrolidone and N-methyl-2-pyrrolidone with acetonitrile and chloroform, J. Chem. Eng. Data 61, 1032–1046. [Google Scholar]
  • Zorębski E., Góralski P., Godula B., Zorębski M. (2014) Thermodynamic and acoustic properties of binary mixtures of 1-butanol with 1,2-butanediol. The comparison with the results for 1,3-, and 1,4-butanediol, J. Chem. Thermodyn. 68, 145−152. [Google Scholar]
  • Lee K-H., Park S-J. (2017) Isothermal vapor-liquid equilibria, excess molar volume and the deviation of refractive indices for binary mixtures of 1-butanol, 1-hexanol, 3-methyl-1-butanol and butyl acetate, Fluid Phase Equilib. 436, 47−54. [Google Scholar]
  • Jimenez E., Casas H., Segade L., Franjo C. (2000) Surface tensions, refractive indexes and excess molar volumes of hexane+1-alkanol mixtures at 298.15 K, J. Chem. Eng. Data 45, 862–866. [Google Scholar]
  • Bruno F., Thiago M.W., Thiago M.C., Leonardo H., Aznar M. (2012) Experimental and calculated liquid-liquid equilibrium data for water+furfural+solvents, Fluid Phase Equilib. 334, 97–105. [Google Scholar]
  • Rodríguez A., Canosa J., Tojo J (2001) Density, refractive index, and speed of sound of binary mixtures (diethyl carbonate+alcohols) at several temperatures, J. Chem. Eng. Data 46, 1506–1515. [Google Scholar]
  • Kijevcanin M.L., Radovi I.R., Djordjevi B.D., Tasić A.Ž., Šerbanović S.P. (2011) Experimental determination and modeling of densities and refractive indices of the binary systems alcohol+dicyclohexylamine at T = (288.15–323.15) K, Thermochim. Acta 525, 114–128. [Google Scholar]
  • Shan Z., Asfour A.A., (1998) Viscosities and densities of eight binary 1-alkanol systems at 308.15 and 313.15 K, Fluid Phase Equilib. 143, 253–262. [Google Scholar]
  • TRC Thermodynamic Tables, Non-hydrocarbons, Table 23-2-1-_1, 1000.-d, Thermodynamics Research Center, College Station, TX, 1991. [Google Scholar]
  • Lladosa E., Chafer A., Monton J.B., Martínez N.F. (2011) Liquid−liquid and vapor−liquid−liquid equilibrium of the 4-methyl-2-pentanone+2-butanol+water system, J. Chem. Eng. Data 56, 1925–1932. [Google Scholar]
  • Resa J.M., González C., Juez M., Ortiz de Landaluce S. (2004) Density, refractive index and speed of sound for mixtures of ethyl acetate with 2-butanol and 3-methyl-1-butanol: Vapor–liquid equilibrium of the ethyl acetate+3-methyl-1-butanol system, Fluid Phase Equilib. 217, 175–180. [Google Scholar]
  • Laavi H., Zaitseva A., Pokki J., Uusi-Kyyny P., Younghun K., Ville A. (2012) Vapor-liquid equilibrium, excess molar enthalpies, and excess molar volumes of binary mixtures containing methyl isobutyl ketone (MIBK) and 2-butanol, tert-pentanol, or 2-ethyl-1-hexanol, J. Chem. Eng. Data 57, 3092–3101. [Google Scholar]
  • Bravo-Sanchez M., Iglesias-Silva G.A., Estrada-Baltazar A., Hall K.R., (2010) Densities and viscosities of binary mixtures of n-butanol with 2-butanol, isobutanol, and tert-butanol from (303.15 to 343.15) K, J. Chem. Eng. Data 55, 2310–2315. [Google Scholar]
  • Gowrisankar M., Venkateswarlu P., Kumar K.S., Sivarambabu S., (2014) J. Ind. Eng. Chem. 25, 405–418. [CrossRef] [Google Scholar]
  • Krishna P.M., Kumar B.R., Sathyanarayana B., Kumar K.S., Satyanarayana N. (2009) Densities and speeds of sound for binary liquid mixtures of thiolane-1,1-dioxide with butanone, pentan-2-one, pentan-3-one, and 4-methyl-pentan-2-one at T = (303.15 or 308.15 or 313.15) K, J. Chem. Eng. Data 54, 1947–1950. [Google Scholar]
  • Kumari P.G., Venkatesu P., Rao M.V.P, Lee M.-J., Lin H.-M. (2009) Excess molar volumes and ultrasonic studies of N-methyl-2-pyrrolidone with ketones at T = 303.15 K, J. Chem. Thermodyn. 41, 586–590. [Google Scholar]
  • Tiwari K., Patra C., Padhy S., Chakravortty V., (1996) Molecular interaction study on binary mixtures of dimethyl sulphoxide+isobutyl methyl ketone (IBMK),+acetylacetone and+tri-N-butylphosphate (TBP) from the excess properties of ultrasonic velocity, viscosity and density, Phys. Chem. Liq.: An Int. J. 32, 149–157. [CrossRef] [Google Scholar]
  • Radhamma M., Venkatesu P., Rao M.V.P., Lee M.-J., Lin H.-M, (2008) Excess molar volumes and ultrasonic studies of dimethylsulphoxide with ketones at T = 303.15 K, J. Chem. Thermodyn. 40, 492–497. [Google Scholar]
  • Zarei H.A. (2006) Densities and volumetric properties of methyl isobutyl ketone+alkanols (C1-C4) at different temperatures, J. Mol. Liq. 124, 23–31. [Google Scholar]
  • Lee L.-S., Chuang M.-L. (1997) Excess volumes of cyclohexane with 2-propanone, 2-butanone, 3-pentanone, 4-methyl-2-pentanone, 1-propanol, and 2-propanol and ethanoic Acid+1-propanol systems, J. Chem. Eng. Data 42, 850–853. [Google Scholar]
  • Clara R.A., Marigliano A.C.G., Solimo H.N. (2007) Density, viscosity, isothermal (vapour+liquid) equilibrium, excess molar volume, viscosity deviation, and their correlations for chloroform+methyl isobutyl ketone binary system, J. Chem. Thermodyn. 39, 261–267. [Google Scholar]
  • Fuge E.T.J., Bowden S.T., Jones W.J. (1952) Some physical properties of diacetone alcohol, mesityloxide and methyl isobutyl ketone, J. Phys. Chem. 56, 1013–1016. [Google Scholar]
  • Riggio R., Ramos J.F., Ubeda M.H., Espindola J.A. (1981) Mixtures of methyl isobutyl ketone with three butanols at various temperatures, Can. J. Chem. 59, 3305–3308 [Google Scholar]
  • K. Raznjevic (1976) Handbook of thermodynamic tables and charts. McGraw-Hill book co. Inc. [Google Scholar]
  • Weisberger A, Proskanes E.D., Reddick, T.A., Toops E.E. (1955) Organic Solvents. Inter. Science Inc. New York. [Google Scholar]
  • Dakshinamurty P., Rao G.J., Acharya M.V.R., Rao C.V. (1958) Ternary vapour-liquid equilibria in the system: benzene-cyclohexane-methyl isobutyl ketone, Chem. Eng. Sci. 9, 69–73. [Google Scholar]
  • Joshi D., Bhatnager D., Kumar A., Gupta R, (2009) Direct measurement of acoustic impedance in liquids by a new pulse echo technique, J. Metro. Soc. India, 24, 215–224. [Google Scholar]
  • Venkatesu P., Rao M.V.P. (1997) Ultrasonic studies of binary mixtures of N, N-dimethylformamide with ketones at 303.15 K, Indian J. Pure Appl. Phys. 35, 62–64. [Google Scholar]
  • Ouaar F., Negadi A., Bahadur I., Negadi L. (2017) Thermophysical approach to understand the nature of molecular interactions and structural factor between methyl isobutyl ketone and organic solvents mixtures, J. Chem. Thermodyn. 113, 291–300. [Google Scholar]
  • Chauhan R.K., Mehta S.K. (1996) Ultrasonic velocity and apparent isentropic compressibilities in mixtures of nonelectrolytes, J. Solution Chem. 26, 295–308. [Google Scholar]
  • Dewan R.K., Gupta C.M., Mehta S.K. (1988) Ultrasonic study of (ethylbenzene+n-alkanol), Acta Acust. United Ac. 65, 245–253. [Google Scholar]
  • Eyring H., Kincaid J.F. (1938) Free volumes and free angle ratios of molecules in liquids, J. Chem. Phys. 6, 220–229. [Google Scholar]
  • Zafarani-Moattar M.T., Shekaari H. (2005) Apparent molar volume and isentropic compressibility of ionic liquid 1-butyl-3-methylimidazolium bromide in water, methanol, and ethanol at T = (298.15 to 318.15) K, J. Chem. Thermodyn. 37 1029–1035. [Google Scholar]
  • Jacobson B. (1952) Ultrasonic velocity in liquids and liquid mixtures, J. Chem. Phys. 20, 927–928. [Google Scholar]
  • Naorem H., Suri S.K. (1991) Thermodynamic studies on the binary liquid mixtures containing furan derivatives: Furfural+Aliphatic Ketones, J. Mol. Liq. 50, 39–52. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.