ogst
Home All issues Volume 70 / No 6 (November–December 2015) Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 70 6 (2015) 1007-1023 References
Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 70, Number 6, November–December 2015
Page(s) 1007 - 1023
DOI https://doi.org/10.2516/ogst/2014025
Published online 28 July 2014
  • Casteel J.F., Djabbarah N.F. (1988) Sweep Improvement in CO2 Flooding by Use of Foaming Agents, SPE Reserv. Eng. 3, 4, 1186–1192. [CrossRef] [Google Scholar]
  • Namdar Z.M., Kam S.I., LaForce T.C., Rossen W.R. (2011) The Method of Characteristics Applied to Oil Displacement by Foam, SPE J. 16, 1, 8–23. [CrossRef] [Google Scholar]
  • Yang H., Yue X.A., Zhao R.B., Yang Z.P. (2009) Experimental Study on Validity of Foam Plugging in Porous Media, Oilfield Chemistry 3, 273–275. [Google Scholar]
  • Zhu Y.Y., Hou Q.F., Weng R., Jian G.Q., Luo Y.S., Li J.G. (2013) Recent Progress and Effects Analysis of Foam Flooding Field Tests in China, SPE paper 165211 presented at 2013 SPE Enhanced Oil Recovery Conference, Kuala Lumpur, Malaysia, 02-04 July. [Google Scholar]
  • Kovscek A.R., Patzek T.W., Radke C.J. (1994) Mechanistic Prediction of Foam Displacement in Multidimensions: A Population Balance Approach, SPE paper 27789 presented at 1994 SPE/DOE Improved Oil Recovery Symposium, Tulsa, Oklahoma, 17-20 April. [Google Scholar]
  • Rossen W.R., Zeilinger S.C., Shi J.X., Lim M.T. (1999) Simplified Mechanistic Simulation of Foam Processes in Porous Media, SPE J. 4, 3, 279–287. [CrossRef] [Google Scholar]
  • Kovscek A.R., Bertin H.J. (2002) Estimation of Foam Mobility in Heterogeneous Porous Media, SPE paper 75181 presented at 2002 SPE/DOE Improved Oil Recovery Symposium, Tulsa, Oklahoma, 13-17 April. [Google Scholar]
  • Du Q.J. (2008) Experiment and Modeling of the Seepage Characteristics in Foam Flooding. A Dissertation Submitted for the Degree of Doctor of Philosophy of China University of Petroleum, Shandong, China. [Google Scholar]
  • Han D.K. (1993) Numerical Reservoir Simulation, Petroleum Industry Press, Beijing, China. [Google Scholar]
  • Falls A.H., Musters J.J., Ratulowski J. (1989) The Apparent Viscosity of Foams in Homogeneous Bead packs, SPE Reserv. Eng. 4, 2, 155–164. [CrossRef] [Google Scholar]
  • Chang S.H., Owusu L.A., French S.B., Kovarik F.S. (1990) The Effect of Microscopic Heterogeneity on CO2-Foam Mobility: Part 2 - Mechanistic Foam Simulation, SPE paper 20191 presented at 1990 Seventh Symposium on Enhanced Oil Recovery, Tulsa, Oklahoma, 22-25 April. [Google Scholar]
  • Friedmann F., Chen W.H., Gauglitz P.A. (1991) Experimental and Simulation Study of High-Temperature Foam Displacement in Porous Media, SPE Reserv. Eng. 6, 1, 37–45. [CrossRef] [Google Scholar]
  • Kovscek A.R., Patzek T.W., Radke C.J. (1993) Simulation of Foam Transport in Porous Media, SPE paper 26402 presented at 1993 SPE Annual Technical Conference and Exhibition, Houston, Texas, 3-6 Oct. [Google Scholar]
  • Low D.H.S., Yang Z.M., Stone T.W. (1992) Effect of the Presence of Oil on Foam Performance: A Field Simulation Study, SPE Reserv. Eng. 7, 2, 228–236. [CrossRef] [Google Scholar]
  • Patzek T.W., Myhill N.A. (1989) Simulation of The Bishop Steam Foam Pilot, SPE paper 18786 presented at 1989 SPE California Regional Meeting, Bakersfield, 5-7 April. [Google Scholar]
  • Kular G.S., Lowe K., Coombe D. (1989) Foam Application in an Oil Sands Steam Flood Process, SPE paper 19690 presented at 1989 SPE Annual Tech. Conf. and Exhibition, San Antonio, Texas, 8-11 Oct. [Google Scholar]
  • Islam M.R., Farouq-Ali S.M. (1990) Numerical Simulation of Foam Flow in Porous Media, J. Can. Pet. Tech. 29, 4, 47–51. [Google Scholar]
  • Rossen W.R., Zhou Z.H., Mamun C.K. (1991) Modeling Foam Mobility at “The Limiting Capillary Pressure”, SPE paper 22627 presented at 1991 Annual Tech. Conf. and Exhibition, Dallas, Texas, 6-9 Oct. [Google Scholar]
  • Khatib Z.I., Hirasaki G.J., Falls A.H. (1988) Effects of Capillary Pressure on Coalescence and Phase Nobilities in Foams Flowing through Porous Media, SPE Reserv. Eng. 3, 3, 919–926. [CrossRef] [Google Scholar]
  • Wang J., Liu H.Q., Ning Z.F., Zhang H.L. (2012) Experimental Research and Quantitative Characterization of Nitrogen Foam Blocking Characteristics, Energy & Fuels 26, 8, 5152–5163. [CrossRef] [Google Scholar]
  • http://www.oakdaleengr.com/index.html [Google Scholar]
  • De Vries A.S., Wit K. (1990) Rheology of Gas/water Foam in The Quality Range Relevant to Steam Foam, SPE Reserv. Eng. 5, 2, 185–192. [CrossRef] [Google Scholar]
  • Chang S.H., Grigg R.B. (1996) Foam Displacement Modeling in CO2 Flooding Processes, SPE paper 35401 presented at 1996 SPE/DOE Improved Oil Recovery Symposium, Tulsa, Oklahoma, 21-24 April. [Google Scholar]
  • Isaacs E.E., McCarthy F.C., Maunder J.D. (1988) Investigation of Foam Stability in Porous Media at Elevated Temperatures, SPE Reserv. Eng. 3, 2, 565–572. [CrossRef] [Google Scholar]
  • Xu Q., Rossen W.R. (2003) Effective Viscosity of Foam in Periodically Constricted Tubes, Colloids Surf. A. 216, 1-3, 175–194. [CrossRef] [Google Scholar]
  • Cox S.J., Neethling S., Rossen W.R., Schleifenbaum W., Schmidt-Wellenburg P., Cilliers J.J. (2004) A Theory of The Effective Yield Stress of Foam in Porous Media: The Motion of A Soap Film Traversing A Three-Dimensional Pore, Colloids Surf. A. 245, 1-3, 143–151. [CrossRef] [Google Scholar]
  • Wang Z., Ganesan N. (2006) Model for Plateau Border Drainage of Power-Law Fluid with Mobile Interface and Its Application to Foam Drainage, J. Colloid Interface Sci. 300, 1, 327–337. [CrossRef] [PubMed] [Google Scholar]
  • Pacelli L.J., Quoc P.N., Peter K.C., Marten A.B. (2006) Coupling of Foam Drainage and Viscous Fingering in Porous Media Revealed by X-ray Computed Tomography, Transp. Porous Med. 64, 3, 301–313. [CrossRef] [Google Scholar]
  • Muijs H.M., Keijzer P.P.M., Wiersma R.J. (1988) Surfactants for Mobility Control in High-Temperature Steam-Foam Applications, SPE paper 17361 presented at 1988 SPE Enhanced Oil Recovery Symposium, Tulsa, Oklahoma, 16-21, April. [Google Scholar]
  • Maini B.B., Ma V. (1986) Laboratory Evaluation of Foaming Agents for High-Temperature Applications – I. Measurements of Foam Stability at Elevated Temperatures and Pressures, J. Can. Petrol. Tech. 25, 6, 65–69. [Google Scholar]
  • Nikolov A.D., Wasan D.T., Huang D.W., Edwards D.A. (1986) The Effect of Oil on Foam Stability: Mechanisms and Implications for Oil Displacement by Foam in Porous Media, SPE paper 15443 presented at 1986 SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 5-8 Oct. [Google Scholar]
  • Suffridge F.E., Raterman K.T., Russell G.C. (1989) Foam Performance under Reservoir Conditions, SPE paper 19691 presented at 1989 SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 8-11 Oct. [Google Scholar]
  • Emadi A., Sohrabi M., Jamiolahmady M., Ireland S., Robertson G. (2011) Mechanistic Study of Improved Heavy Oil Recovery by CO2-Foam Injection, SPE paper 143013 presented at SPE Enhanced Oil Recovery Conference, Kuala Lumpur, Malaysia, 19-21 July. [Google Scholar]
  • Andrianov A., Farajzadeh R., Mahmoodi N.M., Talanana M., Zitha P.L.J. (2012) Immiscible Foam for Enhancing Oil Recovery: Bulk and Porous Media Experiments, Ind. Eng. Chem. Res. 51, 5, 2214–2226. [CrossRef] [Google Scholar]
  • Jensen J.A., Friedmann F. (1987) Physical and Chemical Effects of an Oil Phase on the Propagation of Foam in Porous Media, SPE paper 14375 presented at 1987 SPE California Regional Meeting, Ventura, California, 8-10 April. [Google Scholar]
  • Svorstøl I., Vassenden F., Mannhardt K. (1996) Laboratory Studies for Design of a Foam Pilot in the Snorre Field, SPE paper 35400 presented at 1996 SPE/DOE Improved Oil Recovery Symposium, Tulsa, Oklahoma, 21-24 April. [Google Scholar]
  • Mannhardta K., Svorstøl I. (1999) Effect of Oil Saturation on Foam Propagation in Snorre Reservoir Core, J. Pet. Sci. Eng. 23, 3-4, 189–200. [CrossRef] [Google Scholar]
  • Farajzadeh R., Andrianov A., Krastev R., Hirasaki G.J., Rossen W.R. (2012) Foam-Oil Interaction in Porous Media: Implications for Foam Assisted Enhanced Oil Recovery, SPE paper 154197 presented at 2012 SPE EOR Conference at Oil and Gas West Asia, Muscat, Oman, 16-18 April. [Google Scholar]
  • Simjoo M., Dong Y.F., Andrianov A., Talanana M., Zitha P.L.J. (2012) Novel Insight into Foam Mobility Control, SPE paper 15338 presented at 2012 International Petroleum Technology Conference, Bangkok, Thailand, 7-9 Feb. [Google Scholar]
  • Arnaudov L., Denkov N.D., Surcheva I., Durbut P., Broze G., Mehreteab A. (2001) Effect of Oily Additives on Foam Ability and Foam Stability. 1. Role of Interfacial Properties, Langmuir 17, 22, 6999–7010. [CrossRef] [Google Scholar]
  • Derjaguin B., Landau L. (1941) Theory of the Stability of Strongly Charged Lyophobic Sols and of the Adhesion of Strongly Charged Particles in Solutions of Electrolytes, Acta Physico Chemica URSS 14, 633–662. [Google Scholar]
  • Verwey E.J.W., Overbeek J.Th.G. (1948) Theory of the Stability of Lyophobic Colloids, Elsevier, Amsterdam. [Google Scholar]
  • Shi J.X., Rossen W.R. (1998) Simulation and Dimensional Analysis of Foam Processes in Porous Media, SPE Reserv. Eval. Eng. 1, 2, 148–154. [CrossRef] [Google Scholar]
  • Kovscek A.R., Patzek T.W., Radke C.J. (1997) Mechanistic Foam Flow Simulation in Heterogeneous and Multidimensional Porous Media, SPE J. 2, 4, 511–526. [CrossRef] [Google Scholar]
  • Yu H.M., Ren S.R., Zuo J.L. (2012) A Mathematical Model and Numerical Simulation Method for Air-Foam, Acta Petrolei Sinica 33, 4, 653–657. [CrossRef] [Google Scholar]
  • Hou J., Du Q.J., Li Z.Q., Pan G.M., Lu X.J., Zhou K. (2013) Experiments on Foam Texture under High Pressure in Porous Media, Flow Measurement and Instrumentation 33, 68–76. [CrossRef] [Google Scholar]
  • Simjoo M., Rezaei T., Andrianov A., Zitha P.L.J. (2013) Foam Stability in the Presence of Oil: Effect of Surfactant Concentration and Oil Type, Colloids and Surfaces A: Physicochemical and Engineering Aspects 438, 148–158. [CrossRef] [Google Scholar]
  • Stone H.L. (1973) Estimation of Three-Phase Relative Permeability and Residual Oil Data, J. Can. Pet. Tech. 12, 4, 53–61. [Google Scholar]
  • Qin J.S., Li A.F. (2001) Petrophysics, China University of Petroleum Press, Shandong, China. [Google Scholar]
  • Poston S.W., Gross S.J. (1986) Numerical Simulation of Sandstone Reservoir Models, SPE Reservoir Engineering 1, 4, 423–429. [CrossRef] [Google Scholar]
  • Wright R. (1933) Jamin Effect in Oil Production, AAPG Bulletin 17, 12, 1521–1526. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.