Dossier: Design of Sustainable Processes
Open Access
Numéro
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 65, Numéro 5, September-October 2010
Dossier: Design of Sustainable Processes
Page(s) 689 - 701
DOI https://doi.org/10.2516/ogst/2009079
Publié en ligne 28 septembre 2010
  • Gierman H. (1988) Design of Laboratory Hydrotreating Reactors: Scaling Down of Trickle-flow Reactors, Appl. Catal. 43, 277-286. [CrossRef] [Google Scholar]
  • Mears D.E. (1971) The role of axial dispersion in trickle flow laboratory reactors, Chem. Eng. Sci. 26, 1361-1366. [CrossRef] [Google Scholar]
  • Giese M., Rottschafer K.Vortmeyze D. (1998) Measured and modelled superficial flow profiles in packed beds with liquid flow, AIChE J. 44, 484-490. [CrossRef] [Google Scholar]
  • Berger R.J., Perez-Ramirez J., Kapteijn F.Moulijn J.A. (2002) Catalyst Performance Testing: the Influence of Catalyst Bed Dilution on the Conversion Observed, Chem. Eng. Sci. 90, 173-183. [CrossRef] [Google Scholar]
  • Sie S.T. (1996) Advantages, Possibilities, and Limitations of Small scale testing of catalysts for fixed bed processes, Revue de l’Institut Français du Pétrole 46, 4, 501-515. [Google Scholar]
  • Herskowitz M., Carbonell R.G.Smith J.M. (1979) Effectiveness Factors and Mass Transfer in Trickle-Bed Reactors, AIChE J. 25, 2, 272-283. [CrossRef] [Google Scholar]
  • Khadilkar M.R., Wu Y., Al-Dahhan M.H., Dudukovic M.P.Colakyan M. (1996) Comparison of Trickle-Bed and Upflow Reactor Performance at High Pressure: Model Predictions and Experimental Observations, Chem. Eng. Sci. 51, 10, 2139-2148. [CrossRef] [Google Scholar]
  • Meille V., Pestre N., Fongarland P.de Bellefon C. (2004) Gas/Liquid Mass Transfer in Small Laboratory Batch Reactors: Comparison of Methods, Ind. Eng. Chem. Res. 43, 924-927. [NASA ADS] [CrossRef] [EDP Sciences] [MathSciNet] [PubMed] [Google Scholar]
  • Guo J., Shah D.B.Talu O. (2007) Determination of Effective Diffusivities in Commercial Single Pellets: Effect of Water Loading, Ind. Eng. Chem. Res. 46, 2, 600-607. [NASA ADS] [CrossRef] [EDP Sciences] [MathSciNet] [PubMed] [Google Scholar]
  • Li T., Xu M., Zhu B., Fang D. (2002) Intraparticle diffusion efficiency factor of irregular A301 ammonia synthesis catalyst, J. Chem. Ind. Eng. 53, 12, 1260-1264. [Google Scholar]
  • Scott D.S., Lee W.Papa J. (1974) The measurement of transport coefficients in gas-solid heterogeneous reactions, Chem. Eng. Sci. 29, 11, 2155-2167. [CrossRef] [Google Scholar]
  • Sharma R.K., Cresswell D.L.Newson E.J. (1991) Effective diffusion coefficients and tortuosity factors for commercial catalysts, Ind. Eng. Chem. Res. 30, 7, 1428-1433. [NASA ADS] [CrossRef] [EDP Sciences] [MathSciNet] [PubMed] [Google Scholar]
  • Tottrup P.B. (1982) Evaluation of Intrinsic Steam Reforming Kinetic Parameters from Rate Measurements on Full Particle Size, Appl. Catal. 4, 377-389. [CrossRef] [Google Scholar]
  • Li J., Pan Y., Chen M.Zhu B. (1995) Reaction Kinetics for Olefin Hydrogenation over Cobalt-molybdenum Hydrotreating Catalyst and Model Study of Catalyst Properties, Fuel Sci. Technol. Int. 13, 7, 857-879. [Google Scholar]
  • Lee M., Shen S., Chung T.Kuei C. (1984) Flow and Dispersive Behaviors of Cylindrical Pellet String Reactor, AIChE J. 30, 4, 639-641. [CrossRef] [Google Scholar]
  • Kallinikos L.E.Papayannakos N.G. (2007) Operation of a Miniscale String Bed Reactor in Spiral Form at Hydrotreatment Conditions, Ind. Eng. Chem. Res. 46, 5531-5535. [NASA ADS] [CrossRef] [EDP Sciences] [MathSciNet] [PubMed] [Google Scholar]
  • Kallinikos L.E.Papayannakos N.G. (2007) Fluid Dynamic Characteristics of a Structured Bed Spiral Mini-Reactor, Chem. Eng. Sci. 62, 5979-5988. [CrossRef] [Google Scholar]
  • Hipolito A., Rolland M., Boyer C., de Bellefon C. (2009) Single pellet string reactor two-phase flow hydrodynamics: results on a square-channel with spherical particles, GPE-EPIC, Venice (Italy), 2009. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.