Open Access
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 69, Numéro 7, December 2014
Page(s) 1283 - 1296
Publié en ligne 3 juin 2014
  • Abu-Jdayil B. (2011) Rheology of sodium and calcium bentonite-water dispersions: Effect of electrolytes and aging time, Int. J. Miner. Process. 98, 208–213. [CrossRef] [Google Scholar]
  • Bair S. (2007) High Pressure Rheology for Quantitative Elastohydrodynamics, first edition, Elsevier BV, Oxford, UK. [Google Scholar]
  • Barnes H.A., Nguyen Q.D. (2001) Rotating vane rheometry - a review, J. Non-Newtonian Fluid Mech. 98, 1–14. [Google Scholar]
  • Briscoe B.J., Luckham P.F., Ren S.R. (1994) The properties of drilling fluids at high pressures and high temperatures, Philos. T. Roy. Soc. A 348, 179–207. [CrossRef] [Google Scholar]
  • Burgentzlé D., Duchet J., Gérard J.F., Jupin A., Fillon B. (2004) Solvent-based nanocomposite coatings I. Dispersions of organophilic montmorillonite in organic solvents, J. Colloid Interf. Sci. 278, 26–39. [CrossRef] [Google Scholar]
  • Caenn R., Chillingar G.V. (1996) Drillings Fluids: State of art, J. Pet. Sci. Eng. 14, 221–230. [CrossRef] [Google Scholar]
  • Chaudemanche C., Henaut I., Argillier J.-F. (2009) Combined Effect of Pressure and Temperature on Rheological Properties Water-in-Crude Oil Emulsions, Appl. Rheol. 19, 1–8. [Google Scholar]
  • Darley H.C.H., Gray G.R. (1988) Composition and Properties of Drilling Fluids and Completion Fluids, Gulf Professional Publishing, Houston, Texas. [Google Scholar]
  • Fan Y., Wang K. (2011) The Viscosity of Dimethyl Silicone Oil and the Concentration of Adsorbed Air, AiChE J. 57, 3299–3304. [CrossRef] [Google Scholar]
  • Fuentes-Audén C., Martínez-Boza F., Navarro F.J., Partal P., Gallegos C. (2005) Viscous flow properties and phase behavior of oil-resin blends, Fluid Phase Equilib. 237, 117–122. [CrossRef] [Google Scholar]
  • Gandelman R.A., Leal R.A.F., Gonçalves J.T., Aragão A.F.L., Lomba R.F., Martins A.L. (2007) Study on Gelation and Freezing Phenomena of Synthetic Drilling Fluids in Ultra Deep Water Environments, SPE/IADC Drilling Conference, Amsterdam, Netherlands, 20-22 Feb. [Google Scholar]
  • Ghalambor A., Ashrafizadeh S.N., Nasiri M. (2008) Effect of basic parameters on the viscosity of synthetic-based drilling fluids, SPE International Symposium on Formation Damage Control, Lafayette, Louisiana, 13-15 Feb. [Google Scholar]
  • Harris O.O., Osisanya S.O. (2005) Evaluation of equivalent circulating density of drilling fluids under high pressure/high temperature conditions, SPE Annual Technical and Exhibition Conference, Dallas, Texas 9-12 Oct. [Google Scholar]
  • Hermoso J., Jofore B.D., Martínez-Boza F.J., Gallegos C. (2012) High Pressure Mixing Rheology of Drilling Fluids, Ind. Eng. Chem. Res. 51, 14399–14407. [CrossRef] [Google Scholar]
  • Hermoso J., Martínez-Boza F.J., Gallegos C. (2014) Influence of Viscosity Modifier Nature and Concentration on the Viscous Flow Behavior of Oil-based Drilling Fluid, Appl. Clay Sci. 87, 14–21. [CrossRef] [Google Scholar]
  • Herzhaft B., Peysson Y., Isambourg P., Delepoulle A., Toure A. (2001) Rheological Properties of Drilling Muds in Deep Offshore Conditions, SPE/IADC Drilling Conference, Amsterdam, Netherlands, 27 Feb.-1 March. [Google Scholar]
  • Herzhaft B., Rosseau L., Neau L., Moan M., Bossard F. (2003) Influence of temperature and clay/emulsion microstructure on oil-based mud low shear rate rheology, SPE J. 8, 211–217. [CrossRef] [Google Scholar]
  • Houwen O.H., Geehan T. (1986) Rheology of Oil-Base Muds, SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 5-8 Oct. [Google Scholar]
  • Joshi R.M., Pegg M.J. (2007) Flow properties of biodiesel fuel blends at low temperatures, Fuel 86, 143–151. [CrossRef] [Google Scholar]
  • Kelessidis V.C., Christidis G., Makri P., Hadjistamou V., Tsamantaki C., Mihalakis A., Papanicolaou C., Foscolos A. (2007) Gelation of water-bentonite suspensions at high temperature and rheological control with lignite addition, Appl. Clay Sci. 36, 221–231. [CrossRef] [Google Scholar]
  • Kelessidis V.C., Papanicolaou C., Foscolos A. (2009) Application of Greek lignite as an additive for controlling rheological and filtration properties of water-bentonite suspensions at high temperatures: A review, Int. J. Coal Geol. 77, 394–400. [CrossRef] [Google Scholar]
  • Lu G., Li X., Chen T., Shan J., Gao Y. (2008) New method for non-linear least square estimation on rheological parameter in Casson model of drilling fluid, Shiyou Xuebao/Acta Petrolei Sinica 29, 470–474. [Google Scholar]
  • Massinga P.H., Focke W.W., de Vaal P.L., Atanasova M. (2010) Alkyl ammonium intercalation of Mozambican bentonite, Appl. Clay Sci. 49, 142–148. [CrossRef] [Google Scholar]
  • Minase M., Kondo M., Onikata M., Kawamura K. (2008) The viscosity of organic liquid suspensions of trimethyldococylammonium-montmorillonite complexes, Clays Clay Miner. 56, 49–65. [CrossRef] [Google Scholar]
  • Møller P.C.F., Mewis J., Bonn D. (2006) Yield stress and thixotropy: On the difficulty of measuring yield stress in practice, Soft Matter 2, 274–283. [CrossRef] [PubMed] [Google Scholar]
  • Moraru V.N. (2001) Structure formation of alkylammonium montmorillonites in organic media, Appl. Clay Sci. 19, 11–26. [CrossRef] [Google Scholar]
  • Munawar K., Jan B.M. (2012a) Herschel-Bulkley rheological parameters of a novel environmentally friendly lightweight biopolymer drilling fluid xanthan gum and starch, J. Appl. Polym. Sci. 124, 595–606. [CrossRef] [Google Scholar]
  • Munawar K., Jan B.M. (2012b) Viscoplastic modeling of a novel lightweight biopolymer drilling fluid for unbalanced drilling, Ind. Eng. Chem. Res. 51, 4056–4068. [CrossRef] [Google Scholar]
  • O′Shea J.-P., Tallon C. (2011) Yield stress behavior of concentrated silica suspensions with temperature-responsive polymers, Colloids Surf. A 385, 40–46. [CrossRef] [Google Scholar]
  • Paredes X., Fandiño O., Pensado A.S., Comuñas M.J.P., Fernández J. (2012) Pressure-Viscosity Coefficients for Polyalkylene Glycol Oils and Other Ester Ionic Lubricants, Tribol. Lett. 45, 89–100. [CrossRef] [Google Scholar]
  • Park E.-K., Song K.-W. (2010) Rheological Evaluation of Petroleum Jelly as a Base Material in Ointment and Cream Formulations: Steady Shear Flow Behavior, Arch. Pharm. Res. 33, 141–150. [CrossRef] [PubMed] [Google Scholar]
  • Politte M.D. (1985) Invert Oil Mud Rheology as a Function of Temperature and Pressure, SPE/IADC Drilling Conference, New Orleans, Louisiana, 5-8 March. [Google Scholar]
  • Quemada D., Berli C. (2002) Energy of interaction in colloids and its implications in rheological modeling, Adv. Colloid Interface Sci. 98, 51–58. [CrossRef] [PubMed] [Google Scholar]
  • Rajagopal K.R., Saccomandi G. (2009) The mechanics and mathematics of the effect of pressure on the shear modulus of elastomers, P. Roy. Soc. Lond. A Mat. 465, 3859–3874. [CrossRef] [Google Scholar]
  • Rossi S., Luckham P.F., Zhu S., Briscoe B.J. (1999) High-Pressure/High-Temperature Rheology of Na+-Montmorillonite Clay Suspensions, Proceedings of the 1999 SPE International Symposium on Oilfield Chemistry, Houston, Texas, 16-19 Feb. [Google Scholar]
  • Rossi S., Luckham P.F., Tadros ThF (2002) Influence of non-ionic polymers on the rheological behavior of Na+-montmorillonite clay suspensions–I Nonyphenol–polypropylene oxide–polyethylene oxide copolymers, Colloids Surf. A 201, 85–100. [CrossRef] [Google Scholar]
  • Shahbazi K., Metha S.A., Moore R.G., Ursenbanch M.G., Fraassen K.C.V. (2007) Oxidation as a Rheology Modifier and a Potential Cause of Explosions in Oil and Synthetic-Based Drilling Fluids, International Symposium on Oilfield Chemistry, Houston, Texas, 28 Feb.-2 March. [Google Scholar]
  • Tropea C., Yarin A.L., Foss J.F. (2007) Springer Handbook of Experimental Fluid Mechanics, Springer Verlag, Berlin, Heidelberg, pp. 705. [Google Scholar]
  • Tschoegl N.W., Knauss W.G., Emri I. (2002) The Effect of Temperature and Pressure on the Mechanical Properties of Thermo-and/or Piezorheologically Simple Polymeric Materials in Thermodynamic Equilibrium – A Critical Review, Mech. Time-Depend. Mater. 6, 53–99. [Google Scholar]
  • Williams H., Khatri D., Vaughan M., Landry G., Janner L., Mutize B., Herrera M. (2011) Particle Size Distribution-Engineered Cementing Approach Reduces Need for Polymeric Extenders in Haynesville Shale Horizontal Reach Wells, SPE Annual Technical and Exhibition Conference, Denver, Colorado, 30 Oct.-2 Nov. [Google Scholar]
  • Wu X.-J., Wang Y., Wang M., Yang W., Xie B.-H., Yang M.-B. (2012) Structure of fumed silica gels in dodecane: Enhanced network by oscillatory shear, Colloid Polym. Sci. 290, 151–161. [CrossRef] [Google Scholar]
  • Zhao S., Yan J., Shu Y., Li H., Li L., Ding T. (2009) Prediction model for rheological parameters of oil-based drilling fluids at high temperature and high pressure, Shiyou Xuebao/Acta Petrolei Sinica 30, 603–606. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.