- Arcoumanis C. (2000) Spray and Combustion Development in a Four-Valve Optical Di Diesel Engine, SAE Tech. Paper Series 2000-01-1183. [Google Scholar]
- Bosch W. (1966) Fuel Rate Indicator Is a New Measuring Instrument for Display of the Characteristics of Individual Injection, SAE Tech. Paper Series 660749. [Google Scholar]
- Fettes C., Leipertz A. (2001) Potentials of a Piezo-Driven Passenger Car Common-Rail System to Meet Future Emission Legislations–An Evaluation By Means of In-Cylinder Analysis of Injection and Combustion, SAE Tech. Paper Series 2001-01-3499. [Google Scholar]
- Ganser M. (1998) Common Rail Injector with Injection Rail Control, SAE Tech. Paper Series 981927. [Google Scholar]
- Gupta S.E., Sekar R., Poola R. (2000) Effect of Injection Parameter on Diesel Spray Characteristics, SAE Tech. Paper Series 2000-01-1600. [Google Scholar]
- Helmantel A., Gustavsson J., Denbratt I. (2005) Operation of a Di Diesel Engine with Variable Effective Compression Ratio in HCCI and Conventional Diesel Mode, SAE Tech. Paper Series 2005-01-0177. [Google Scholar]
- Ibrahim E.A.,Yang H.Q.,Przekwas A.J. (1993) Modeling of Spray Droplets Deformation and Breakup, J. Propul. Power 9, 645-651. [CrossRef] [Google Scholar]
- Kim M.Y., Lee C.S. (2007) Effect of Narrow Fuel Spray Angle and Dual Injection Configuration on the Improvement of Exhaust Emission in a HCCI Diesel Engine, doi: 10.1016/j:fuel 2007.03.016 (in Press). [Google Scholar]
- Koyanagi K., Öing H., Renner G., Maly R. (1999) Optimizing Common-Rail Injection By Optical Diagnostics in a Transparent Production Type Diesel Engine, SAE Tech. Paper Series 1999-01-3646. [Google Scholar]
- Lai M.C., Wang T.C., Xie X., Han J.S., Henein N., Schwarz E., Bryzik W. (1998) Microscopic Characterization of Diesel Sprays at VCO Nozzle Exit, SAE Tech. Paper Series 982542. [Google Scholar]
- Park S.W.,Lee C.S. (2003) Macroscopic Structure and Atomization Characteristics of High-Speed Diesel Spray, Int. J. Automotive Technol. 4, 157-164. [Google Scholar]
- Reitz R.D. (1987) Modeling Atomization Processes in High-Pressure Vaporizing Sprays, Atomization Spray Technol. 3, 309-337. [Google Scholar]
- Sarre C.K., Kong S.C., Reitz R.D. (1999) Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays, SAE Tech. Paper Series 1999-01-0912. [Google Scholar]
- Tanaka T.,Ando A.,Ishizaka K. (2002) Study on Pilot Injection of DI Diesel Engine using Common-Rail Injection System, J. SAE 23, 297-302. [Google Scholar]
- Taylor C., Washington G. (2003) The Application of Piezoceramic Actuation to Direct Fuel Injection, SAE Tech. Paper Series 2003-32-0001. [Google Scholar]
- Timothy J.J., Stanislav V.B., Dennis N.A., Patrick G.S. (2005) Lean and Rich Premixed Compression Ignition Combustion in a Light-Duty Diesel Engine, SAE Tech. Paper Series 2005-01-0166. [Google Scholar]
Open Access
| Numéro |
Oil & Gas Science and Technology - Rev. IFP
Volume 63, Numéro 2, March-April 2008
|
|
|---|---|---|
| Page(s) | 239 - 250 | |
| DOI | https://doi.org/10.2516/ogst:2007074 | |
| Publié en ligne | 14 décembre 2007 | |
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.