Dossier: Deformation of Solid Polymers
Open Access
Numéro
Oil & Gas Science and Technology - Rev. IFP
Volume 61, Numéro 6, November-December 2006
Dossier: Deformation of Solid Polymers
Page(s) 743 - 749
DOI https://doi.org/10.2516/ogst:2006012
Publié en ligne 1 janvier 2007
  • Ahzi, S.,Makradi, A.,Gregory, R.V. and Edie, D.D. (2003) Modelling of deformation and strain-induced crystallization in poly(ethylene terephtalate) above the glass transition temperature. Mech. Mater., 35, 1139-1148. [Google Scholar]
  • André, S.,Meshaka, Y. and Cunat, C. (2003) Rheological constitutive equation of solids. Rheol. Acta, 42, 500-515. [CrossRef] [Google Scholar]
  • Chaboche, J.L. (1997) Thermodynamic formulation of constitutive equations and application to the viscoplasticity and viscoelasticity of metals and polymers. Int. J. Solids Struct., 34, 2239-2254. [CrossRef] [Google Scholar]
  • Chambaudet, S., Lesne, P.M. and G'Sell, C. (1998) Simulation of compression tests on polymers and unidirectional composites. Ann. Composites, 1, 3-17. [Google Scholar]
  • Colak, O.U. (2004) Modelling deformation behaviour of polymers with viscoplasticity theory based on overstress. Int. J. Plasticity, 21, 145-160. [CrossRef] [Google Scholar]
  • Drozdov, A.D. and Christiansen, J.C. (2003a) The effect of annealing on the elastoplastic response of isotactic polypropylene. Eur. Polym. J., 39, 21-31. [CrossRef] [Google Scholar]
  • Drozdov, A.D. and Christiansen, J.C. (2003b) Modelling the viscoplastic response of polyethylene in uniaxial loading-unloading tests. Mech. Res. Commun., 30, 431-442. [CrossRef] [Google Scholar]
  • Ho, K. and Krempl, E. (2000) Extension of the viscoplasticity theory based on overstress (VBO) to capture non-standard rate dependence in solids. Int. J. Plasticity, 18, 851-871. [CrossRef] [Google Scholar]
  • Hobeika, S.,Men, Y. and Strobl, G. (2000) Temperature and strain rate independence of critical strains in polyethylene and poly (ethylene-co-vinyl acetate). Macromolecules 33, 1827-1833. [CrossRef] [Google Scholar]
  • Kichenin, J.,Dang-Van, K. and Boytard, K. (1996) Finite-element simulation of a new two-dissipative mechanisms model for bulk medium-density polyethylene. J. Mater. Sci., 31, 1653-1661. [CrossRef] [Google Scholar]
  • Krempl, E. and Ho, K. (2000) An overstress model for solid polymer deformation behaviour applied to Nylon 66. ASTM Special Technical Publication, 1357, 118-137. [Google Scholar]
  • Krempl, E. and Khan, F. (2003) Rate (time)-dependent deformation behavior: an overview of some properties of metals and solid polymers. Int. J. Plasticity, 19, 1069-1095. [CrossRef] [Google Scholar]
  • Oshmyan, V.G.,Patlazhan, S.A. and Rémond, Y. (2004) Simulation of small-strain deformations of semi-crystalline polymer: Coupling of structural transformations with stress-strain response. J. Mater. Sci., 39, 3577-3586. [CrossRef] [Google Scholar]
  • Oshmyan, V.G.,Patlazhan, V. and Rémond, Y. (2005) The Effect of Structural Changes and Nonlinear Character of Plastic Flow on Low Strains in Semi-crystalline Polymers, Polym. Sci., 47, 346. [Google Scholar]
  • Oshmyan, V.G.,Patlazhan, S. and Rémond, Y. (2006) Principles of structural mechanical modeling of polymers and composites. Polym. Sci. Ser. A, 48, 1691-1902. [CrossRef] [Google Scholar]
  • Popelar, C.F.,Popelar, C.H. and Kenner, V.H. (1990) Viscoelastic material characterization and modeling for polyethylene. Polym. Eng. Sci., 30, 577-586. [Google Scholar]
  • Rémond, Y. (2005) Constitutive modeling of viscoelastic unloading of short glass fibre-reinforced polyethylene. Compos. Sci. Technol., 65, 421-428. [CrossRef] [Google Scholar]
  • Sirotkin, R.O. and Brooks, N.W. (2001) The effects of morphology on the yield behaviour of polyethylene copolymers. Polymer 42, 3791-3797. [CrossRef] [Google Scholar]
  • Stehly, M. and Rémond, Y. (2002) On numerical simulation of cyclic viscoplastic laws with the large time increment method. Mech. Time Dependent Mater., 6, 147-170. [CrossRef] [Google Scholar]
  • Yao, D. and Krempl, E. (1985) Viscoplasticity theory based on overstress. The prediction of monotonic and cyclic proportional and non proportional loading paths of an Aluminium alloy. Int. J. Plasticity, 1, 259-274. [CrossRef] [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.