Dossier: Applied Mechanics for the Oil Industry - Part 2
Open Access
Oil & Gas Science and Technology - Rev. IFP
Volume 57, Numéro 1, January-February 2002
Dossier: Applied Mechanics for the Oil Industry - Part 2
Page(s) 7 - 37
Publié en ligne 1 décembre 2006
  • Joosten, M.W. (1985) New Study Shows How to Predict Accumulated Drillpipe Fatigue. Word Oil, October. [Google Scholar]
  • Dale, B.A. (1988) An Experimental Investigation of Fatigue- Crack Growth in Drillstring Tubulars. SPE Drilling Engineering, 356-362, December. [Google Scholar]
  • (1992) Ten Ways to Reduce Drilling Costs. Petroleum Engineer International, September. [Google Scholar]
  • Hill, T.H. (1992) A Unified Approach to Drillstem Failure Prevention. SPE Drilling Engineering, December. [Google Scholar]
  • Pitts, J.P. Trip Inspection, Testing Gain Favor as Insurance. Drill Bit, 303, 885. [Google Scholar]
  • Lieurade, H.P. (1982) La pratique des essais de fatigue. Commission Fatigue des m賡ux de la SFM, Pyc Edition, Paris, France. [Google Scholar]
  • Lubinski, A. (1961) Maximum Permissible Doglegs in Rotary Boreholes. Journal of Petroleum Technology, February. [Google Scholar]
  • Hansford, J.E. and Lubinski, A. (1966) Cumulative Fatigue Damage of Drillpipe in Doglegs. Journal of Petroleum Technology, March. [Google Scholar]
  • API (1998) Recommended Practice for Drillstem Design and Operating Limits. API-RP-7G, 16th ed., August. [Google Scholar]
  • Wu, J. (1997) Model Predicts Drillpipe Fatigue in Horizontal Wells. Maurer Engineering Inc., Oil and Gas Journal, February 3. [Google Scholar]
  • Shepard, J.S. (1992) Extended Drillpipe Life with Tighter Specifications. Global Marine Drilling Co., IADC/SPE 23843, February. [Google Scholar]
  • Wu, J. (1996) Drill-Pipe Bending and Fatigue in Rotary Drilling of Horizontal Wells. Maurer Engineering Inc., SPE 37353, October. [Google Scholar]
  • Paslay, P.R. and Cernocky, E.P. (1991) Bending Stress Magnification in Constant Curvature Doglegs with Impact on Drillstring and Casing. SPE 22547, October. [Google Scholar]
  • Howard, J.A. (1993) Systematic Tracking of Fatigue and Crack Growth to Optimize Drillstring Reliability. Enertech Engineering and Research Co., SPE/IADC 25775, February. [Google Scholar]
  • Smith, J.E. (1992) Drillpipe for Horizontal Drilling. SPE 23990, March. [Google Scholar]
  • Hill, T.H. (1995) Designing and Qualifying Drillstrings for Extended Reach Drilling. SPE/IADC 29349, Drilling Conference, Amsterdam, February 28-March 2. [Google Scholar]
  • Dawson, R. and Paslay, P.R. (1984) Drillpipe Buckling in Inclined Holes. Journal of Petroleum Technology, October. [Google Scholar]
  • He, X. and Kylingstad, A. (1993) Helical Buckling and Lock-up Conditions for Coiled Tubing in Curved Wells. SPE Asia-Pacific Oil and Gas Conference, SPE 25370, February. [Google Scholar]
  • Baryshnikov, A. (1997) Downhole Tool Serviceability Under Dynamic Loads. Drilling Conference SPE/IADC 37647, Amsterdam, March 4-6. [Google Scholar]
  • Rahman, M.K. (1999) Stress Concentration Incorporated Fatigue Analysis of Die-Marked Drillpipe. International Journal of Fatigue, Elsevier, 21, 799-811, January. [Google Scholar]
  • Grondin, G.Y. (1994) Fatigue Testing of Drillpipe. SPE Drilling and Completion, June. [Google Scholar]
  • Tafreshi, A. and Dover, W.D. (1993) Stress Analysis of Drillstring Threaded Connections Using the Finite Element Method. International Journal Fatigue, 15, 5, 429-438, September. [CrossRef] [Google Scholar]
  • Zeren, F. (1986) Fatigue Limits Analyzed for Drillpipe in a Dogleg. Oil and Gas Journal, September, 22. [Google Scholar]
  • Ertas, A. (1989) The Effect of Tool-Joint Stiffness on Drillpipe Fatigue in Riser Ball Joints. Journal of Engineering for Industry, 111, November. [Google Scholar]
  • Ertas, A. (1992) A Comparison of Fracture Mechanics and S-N Curve Approaches in Designing Drillpipe. Journal of Offshore Mechanics and Artic Engineering, 114, August. [Google Scholar]
  • Placido, J.C.R. (1994) Drillpipe Fatigue Life Prediction Model Based on Critical Plane Approaches. OTC 7569, Houston, Texas, May 2-5. [Google Scholar]
  • Chen, W.C. (1990) Drillstring Fatigue Performance. SPE Drilling Engineering, June. [Google Scholar]
  • Ertas, A. A Comparison of Fracture Mechanics and S-N Curve Approaches in Designing Drillpipe. Mechanical Engineering Department, Texas Tech. University, Lubbock, Texas. [Google Scholar]
  • Kral, E. (1984) Fracture Mechanics Concept Offers Model to Help Calculate Fatigue Life in Drillpipe. Technology, Oil and Gas Journal, August, 13. [Google Scholar]
  • Lemaître, J. and Chaboche, J.L. (1996) Mécanique des matériaux solides. 2nd ed., Dunod, Paris, France. [Google Scholar]
  • Hill, T.H. (1985) Qualifying Drillstring Components for Deep Drilling. Journal of Petroleum Technology, August, 1511-1522. [Google Scholar]
  • Hill, T.H. (1998) Standard DS-1, Drillstem Design and Inspection. T.H. Hill Associates Inc., DEA Project 74, 2nd ed., March. [Google Scholar]
  • Horbeek, J.H. (1995) Successful Reduction of North Sea Drillstring Failures. Offshore Europe SPE 30348, Aberdeen, September, 5-8. [Google Scholar]
  • Sweet, R.G. (1989) Case History of Drillstem Failures Offshore West Africa. Drilling Conference SPE/IADC 18653, New Orleans, February 28-March 3. [Google Scholar]
  • Kahil, J. (1989) New Technology for the Inspection of Used Tubing and Drillpipe. Eighth International Conference on Offshore Mechanics and Artic Engineering, 327-332, The Hague, March 19-23. [Google Scholar]
  • API (1999) API Specification 5D, Drillpipe, 4th ed., August. [Google Scholar]
  • API (1997) Recommended Practice for Field Inspection of New Casing, Tubing and Plain End Drillpipe. API-RP-5A5, 6th ed., December. [Google Scholar]
  • Wade Edens, C. () Recent Innovation in Flux Leakage Drillpipe Inspection Technology: Quality Control Enhanced. Oilfield Equipment Marketing Inc., South Texas Chapter ASNT, 515, 860. [Google Scholar]
  • Shaffer, E.A. (1992) Drillstring Problems Related to Internal Upset-Run-Cut Area of Drillpipe. Tuboscope Inc., Drilling Conference, New Orleans, February 18-21. [Google Scholar]
  • Armstrong, G.M. (1985) Sensitivity and Application of the Normal Beam Ultrasonic Technique for Detection of Fatigue Cracks in Rotary Shouldered Connections. SPE/IADC 13430, March. [Google Scholar]
  • Chapman, P.W. (1986) Ultrasonics Finds Drillpipe Cracks. Drilco, Petroleum Engineer International, March. [Google Scholar]
  • Stanley, R.K. and Wells, L. (1994) Recent Advances in Used Drillpipe Inspection by Ultrasonic Methods. Material Evaluation, 1282-1285, November. [Google Scholar]
  • Ananto, D. (1996) Determining Drillpipe Wear Inside Casing Using Ultrasonic Measurements. Twenty-fifth Silver Anniversary Convention, Indonesian Petroleum Association, Proceedings, October, 411-423. [Google Scholar]
  • Walaszek, H. (1998) Le contrôle ultrasonore possible aujourd’hui sans couplant ? Présentation de quelques résultats obtenus au CETIM. CETIM, Service CND, Senlis, France, May. [Google Scholar]
  • Dale, B.A. (1988) Inspection Interval Guidelines to Reduce Drillstring Failures. Exxon, Drilling Conference SPE/IADC 17207, Dallas, Texas, February 28-March 2. [Google Scholar]
  • (1982) Drillpipe Inspection Technique. The Oilman, November, 33. [Google Scholar]
  • Ligrone, A. (1995) Reliability Methods Applied to Drilling Operations. Agip SpA, Drilling Conference, Amsterdam, February 28-March 2. [Google Scholar]
  • Yoder, D.L. (1991) An Integrated Approach to Enhancing the Mechanical Life of Drillpipe in Extended Reach Wells. OTC 6712, Houston, Texas, May 6-9. [Google Scholar]
  • Gensmer, R.P. (1988) Field Correlation Between Internal Taper Length and Tube Failures in 4.5-in. 16.60E, IEU Drillpipe. Noble Drilling Corp., Drilling Conference IADC/SPE 17205, Dallas, Texas, February 28-March 2. [Google Scholar]
  • Gonzalez-Rodriguez, J.G. (1992) Corrosion Fatigue of AISI 4145 Steel in Drilling Mud. NACE Annual Conference and Corrosion Show, 151. [Google Scholar]
  • Seshadri, P.V. (1992) Drillstring Failure Database: What Do We Learn? API/IADC, Drilling Conference IADC/SPE 23842, New Orleans, February 18-21. [Google Scholar]
  • Brennan, F.P. (1995) Fatigue of Drillstring Connections. Transaction of the ASME, 117, May. [Google Scholar]
  • Hatcher, P.R. and Szklarz, K.E. (1992) Near-Threshold Fatigue Crack Propagation Behavior of a Low Alloy Steel in Pressurized Dilute Brine Solution. NACE Annual Conference and Corrosion Show, 150. [Google Scholar]
  • Grondin, G.Y. and Kulak, G.L. (1989) Fatigue of Drillpipe. CADE/CAODC Spring Drilling Conference, 89-47, April. [Google Scholar]
  • Baryshnikov, A. (1997) Downhole Tool Full-Scale Fatigue Test: Experience and Practice Recommendations. ASME, 8th Annual International Energy Week Conference and Exhibition, Houston, Texas, January 28-30. [Google Scholar]
  • Trishman, L.E. (1952) Methods for the improvement of Drill Collar Joints Evaluated by Full-size Fatigue Tests. Spring Meeting of the Southwestern District, Division of Production, Shreveport, March. [Google Scholar]
  • Gaynor, T.M. (1996) Reduction in Fatigue Failures through Crack Detection by Alternating Current Field Measurement. Drilling Conference IADC/SPE 35033, March. [Google Scholar]
  • Azar, J.J. (1979) How O2, CO2 and Chlorides Affect Drillpipe Fatigue. Petroleum Engineer International, March. [Google Scholar]
  • Jiashen, Z. and Jingmao, Z. (1993) Increasing the Fatigue Life of 40-Cr Steel in Drilling Muds with Corrosion Inhibitors. NACE Corrosion, 49, 3, March. [Google Scholar]
  • Karim Khani, M. (1996) Corrosion Fatigue in Nitrocarburized Quenched and Tempered Steels. Metallurgical and Materials Transactions, 27A, May. [Google Scholar]
  • Hendrickson, J.R. and Holland, M.R. (1984) Drillpipe Failures in Hydrogen Sulfide. Drilling Technology Conference Transactions, 358, 516, March. [Google Scholar]
  • Wilson, G.E. (1996) A New Drillpipe Design Virtually Eliminates Failures That Result from Slip Damage. Drilling Conference IADC/SPE 35036, New Orleans, March 12-15. [Google Scholar]
  • Wilson, G.E. (1998) How to Reduce Drillstring Fatigue Failures in a Corrosive Environment. Drilling 98, World Oil, October. [Google Scholar]
  • API (1997) Standard Procedure for Field Testing Water- Based Drilling Fluids. API-RP-13B-1, 2nd ed., September. [Google Scholar]
  • API (1998) Standard Procedure for Field Testing Oil-Based Drilling Fluids. API-RP-13B-2, 3rd ed., February. [Google Scholar]
  • Tsukano, Y. (1988) Appropriate Design of Drillpipe Internal Uset Geometry Focusing on Fatigue Property. Drilling Conference IADC/SPE 17206, Dallas, Texas, February 28- March 2. [Google Scholar]
  • Winship, T.E. (1995) Making Drillpipe Upsets which Increase Fatigue Life. Spring Drilling Conference CADE/CAODC, 95-1009, Calgary, April. [Google Scholar]
  • Wilson, G.E. (1994) What difference Does Internal Taper Length Make on Drillpipe Fatigue Life? Drilling and Completion, SPE 23841, March. [Google Scholar]
  • Wilson, G.E. (1993) A New Tool-Joint Design Increases the Fatigue Life of Drillpipe Tubes. Drilling Conference SPE/IADC 25772, Amsterdam, February 23-25. [Google Scholar]
  • Tsukano, Y. (1990) Improvement of Drill Collar Fatigue Property by Last Engaged Thread Height Reduction of Pin. Drilling Engineering, SPE 18704, December. [Google Scholar]
  • Weiner, P.D. (1972) A Means of Increasing Drill Collar Connection Life. Transactions of the ASME, Journal of Engineering for Industry, ASME 72-Pet-65. [Google Scholar]
  • Knight, M.J. (1999) Fatigue Life Improvement of Drill Collars Through Control of Bore Eccentricity. Engineering Failure Analysis, 6, 301-319. [CrossRef] [Google Scholar]
  • Armstrong, G.M. (1987) Failure Prevention by Selection and Analysis of Drillstem Connections. Drilling Conference SPE/IADC 16075, New Orleans, March 15-18. [Google Scholar]
  • Kirk, W.L. (1972) Deep Drilling Practices in Mississippi. Journal of Petroleum Technology, June. [Google Scholar]
  • Schock, W.H. (1986) One Piece, Forged, Heavy Wall Drillpipe: Built Stronger for Tougher Drilling. Drilling Conference IADC/SPE 14792, Dallas, February 10-12. [Google Scholar]
  • Gabolde, G. and Nguyen, J.P. (1999) in Drilling Data Handbook, Publications de l’Institut français du pétrole, Éditions Technip, 7th ed., Paris, France. [Google Scholar]
  • Baryshnikov, A. (1994) Optimization of Rotary-Shouldered Connection Reliability and Failure Analysis. Drilling Conference IADC/SPE 27535, Dallas, February 15-18. [Google Scholar]
  • Baryshnikov, A. (1995) Downhole Tools Fatigue Resistance for Different Materials. Drilling Technology, ASME, PD, 65. [Google Scholar]
  • Bailey, E.I. (1998) Calculating Limits for Torsion and Tensile Loads on Drillpipe. Hart's Petroleum Engineer International, February. [Google Scholar]
  • Payne, M.L. (1995) Drillstring Design Options for Extended Reach Drilling Operations. Drilling Technology, ASME, PD, 65. [Google Scholar]
  • API (1992) Recommended Practice for Testing of Thread Compound for Rotary Shouldered Connections. API-RP-7A1, 1st ed., ANSI/API-RP-7A1-1992, November. [Google Scholar]
  • API (1983) Tentative API Bulletin on Rotary Shouldered Connection Thread Compounds. Bulletin API-7A1, 1st ed., February 1980 and Supplement 1, March 1983. [Google Scholar]
  • Baryshnikov, A. (1995) Make-up Torque and Rotary Shouldered Connection Reliability. Drilling Conference SPE/IADC 29352, Amsterdam, February 28-March 2. [Google Scholar]
  • Baryshnikov, A. (1999) Eliminating Twist-Offs as a Cause of Drillstring Failure. OCTG Special Report, Word Oil, July. [Google Scholar]
  • Slack, M.W. (1990) Technique to Assess Directly Make-up Contact Stress Inside Tubular Connections. Drilling Conference IADC/SPE 19924, Houston, Texas, February 27- March 2. [Google Scholar]
  • Tsukano, Y. (1990) Development of Lightweight Steel Drillpipe with 165-ksi Yield Strength. Drilling Conference IADC/SPE 19960, Houston, Texas, February 27-March 2. [Google Scholar]
  • Glagola, M.A. (1986) Aluminium Drillpipe for Directional Drilling. Drilling Conference IADC/SPE 14789, Dallas, Texas, February 10-12. [Google Scholar]
  • Schenato, A., Borriello, G. and Pozzi, V. (1991) Ultra Deep Drilling Problems and Solutions, Agip SpA, Milano, Italy. [Google Scholar]
  • Eaton, L.F. (1993) Tool-Joint Heat Checking While Predrilling for Auger TLP Project. Drilling Conference SPE/IADC 25776, Amsterdam, February 23-25. [Google Scholar]
  • Szklarz, K.E. (1990) Fracture Toughness Criteria for High- Strength Drillpipe. Shell Canada Ltd, Drilling Conference IADC/SPE 19964, Houston, Texas, February 27-March 2. [Google Scholar]
  • Guesnon, J. and Pignard, G. (1992) IFP Field Tests its New Trafor MWD System. Ocean Industry, May, 23-28. [Google Scholar]
  • Mabile, C.,Fay, J.B. and Desloovere, O. (1997) Standard Surface Measurements Sampled at High Acquisition Rate Help in Detecting Drill String Vibrations. Offshore Mediterranean Conf. OMC 97, Ravenna, Italy, March 19-21, 759-769. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.