ogst
Home All issues Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 66 5 (2011) 801-822 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Numerical simulation and spray model development of liquid ammonia injection under diesel-engine conditions

Junqing Zhang, Danan Chen, Shini Lai, Jun Li, Hongyu Huang and Noriyuki Kobayashi
Energy 294 130833 (2024)
https://doi.org/10.1016/j.energy.2024.130833

Multiscale numerical modeling of a complete spray evolution including breakup of liquid jet injection in gaseous cross flow

Yaquan Sun, Yongxiang Li, Louis Dreßler, Kaushal Nishad and Amsini Sadiki
International Journal of Multiphase Flow 170 104655 (2024)
https://doi.org/10.1016/j.ijmultiphaseflow.2023.104655

Primary atomization of liquid jets: Identification and investigation of droplets at the instant of their formation using direct numerical simulation

Elias Trautner, Josef Hasslberger, Sebastian Ketterl and Markus Klein
International Journal of Multiphase Flow 160 104360 (2023)
https://doi.org/10.1016/j.ijmultiphaseflow.2022.104360

Very low soot formation with modulated liquid length and lift-off length of diesel spray flame

Hongliang Luo, Yu Jin, Chang Zhai, Feixiang Chang, Wenjing Xing, Keiya Nishida and Yoichi Ogata
Journal of the Energy Institute 111 101383 (2023)
https://doi.org/10.1016/j.joei.2023.101383

Experimental study of combustion process of NH3 stratified spray using imaging methods for NH3 fueled large two-stroke marine engine

Yasuhisa Ichikawa, Yoichi Niki, Koji Takasaki, Hideaki Kobayashi and Akihiro Miyanagi
Applications in Energy and Combustion Science 13 100119 (2023)
https://doi.org/10.1016/j.jaecs.2023.100119

Investigations on energy efficiency enhancement under knock threshold limit conditions for a turbocharged direct-injection spark-ignition engine fueled with wet ethanol

Alessandro J.T.B. de Lima and Waldyr L.R. Gallo
Applied Thermal Engineering 232 121003 (2023)
https://doi.org/10.1016/j.applthermaleng.2023.121003

Comparative Study on the Macroscopic Characteristics of Gasoline and Ethanol Spray from a GDI Injector under Injection Pressures of 10 and 60 MPa

Xiang Li, Dayou Li, Jingyin Liu, et al.
ACS Omega 7 (10) 8864 (2022)
https://doi.org/10.1021/acsomega.1c07188

Interpretative Review of Diesel Spray Penetration Normalized by Length and Time of Breakup (Similarity Law of Diesel Spray and Its Application)

Masataka Arai
Energies 15 (13) 4926 (2022)
https://doi.org/10.3390/en15134926

Experimental study on the spray characteristics of octanol diesel and prediction of spray tip penetration by ANN model

Junjian Tian, Yu Liu, Haobo Bi, Fengyu Li, Lin Bao, Kai Han, Wenliang Zhou, Zhanshi Ni and Qizhao Lin
Energy 239 121920 (2022)
https://doi.org/10.1016/j.energy.2021.121920

Experimental and numerical study of the impinging aerosols method for the micro-encapsulation of phosphate solubilising microorganisms (PSMs)

Yiik Siang Hii, Ming Chiat Law and Yen San Chan
Biochemical Engineering Journal 174 108118 (2021)
https://doi.org/10.1016/j.bej.2021.108118

Experimental and Numerical Investigation on the Influence of the Rate of Injection (Roi) on Engine Performance for B100 Fuel Control Strategy in Diesel Engines

Moïse Ligan Noukpo, Claude Valery Ngayihi Abbe, Joseph Nkongho Anyi, et al.
Journal of Engineering 2020 1 (2020)
https://doi.org/10.1155/2020/8884754

Comprehensive Spray Characteristics of Water in Port Fuel Injection Injector

Jeonghyun Park, Kyung-Hwan Lee and Suhan Park
Energies 13 (2) 396 (2020)
https://doi.org/10.3390/en13020396

Review of 1D Spray Tip Penetration Models and Fuel Properties Influence on Spray Penetration

Ibrahim Najar, Benjamin Stengel, Bert Buchholz and Egon Hassel
SAE International Journal of Engines 13 (4) 521 (2020)
https://doi.org/10.4271/03-13-04-0034

Experimental study on spray and evaporation characteristics of diesel-fueled marine engine conditions based on optical diagnostic technology

Wenzheng Zhang, Xiang Li, Li Huang and Mingzhi Feng
Fuel 246 454 (2019)
https://doi.org/10.1016/j.fuel.2019.02.065

COMPARATIVE STUDIES OF THE BIODIESEL FUEL JET DEVELOPMENT DYNAMICS IN COMMON RAIL AND CONVENTIONAL DESIGN FUEL SYSTEMS

Sergey P. Kulmanakov, Sergejus Lebedevas, Sergey S. Kulmanakov, Nadežda Lazareva and Paulius Rapalis
Transport 34 (1) 67 (2019)
https://doi.org/10.3846/transport.2019.7223

Effect of injection dynamic behavior on fuel spray penetration of common-rail injector

Yan Lei, Jiaxing Liu, Tao Qiu, Jianchun Mi, Xianwu Liu, Ning Zhao and Guangyu Peng
Energy 188 116060 (2019)
https://doi.org/10.1016/j.energy.2019.116060

n-Hexane injection into high-temperature and high-pressure environments

Łukasz Jan Kapusta, Ireneusz Pielecha, Krzysztof Wisłocki and Andrzej Teodorczyk
Journal of Visualization 22 (6) 1071 (2019)
https://doi.org/10.1007/s12650-019-00596-z

Near-azeotropic volatility behavior of hydrous and anhydrous ethanol gasoline mixtures and impact on droplet evaporation dynamics

Bahareh Abdollahipoor, Saeid Aghahossein Shirazi, Kenneth F. Reardon and Bret C. Windom
Fuel Processing Technology 181 166 (2018)
https://doi.org/10.1016/j.fuproc.2018.09.019

Numerical investigation of the breakup behavior of an oscillating two-phase jet

S. Schmidt, O. Krüger, K. Göckeler and C. O. Paschereit
Physics of Fluids 30 (7) (2018)
https://doi.org/10.1063/1.5029772

Development of Tool to Design Piston Bowl Considering Spray Parameters to Reduce Emissions

Sajil N Sreedharan and Rajiv Krishnan
IOP Conference Series: Materials Science and Engineering 396 012055 (2018)
https://doi.org/10.1088/1757-899X/396/1/012055

Physiochemical Property Characterization of Hydrous and Anhydrous Ethanol Blended Gasoline

Saeid Aghahossein Shirazi, Bahareh Abdollahipoor, Jake Martinson, Kenneth F. Reardon and Bret C. Windom
Industrial & Engineering Chemistry Research 57 (32) 11239 (2018)
https://doi.org/10.1021/acs.iecr.8b01711

Effects of ultra-high injection pressure on penetration characteristics of diesel spray and a two-mode leading edge shock wave

Tao-Ming Jia, Guo-Xiu Li, Yu-Song Yu and Yang-Jie Xu
Experimental Thermal and Fluid Science 79 126 (2016)
https://doi.org/10.1016/j.expthermflusci.2016.07.006

Numerical simulation of primary atomization in diesel spray at low injection pressure

F.J. Salvador, J.-V. Romero, M.-D. Roselló and D. Jaramillo
Journal of Computational and Applied Mathematics 291 94 (2016)
https://doi.org/10.1016/j.cam.2015.03.044

Spray Characterization and Ignition Delay Measurements of JP-8 and IPK in a Constant-Pressure Flow Chamber

Michael Tess, Matthew Kurman and Chol-Bum Kweon
SAE International Journal of Engines 09 (2) 899 (2016)
https://doi.org/10.4271/2016-01-0736

Modelling of biodiesel fuel droplet heating and evaporation: Effects of fuel composition

M. Al Qubeissi, S.S. Sazhin, C. Crua, J. Turner and M.R. Heikal
Fuel 154 308 (2015)
https://doi.org/10.1016/j.fuel.2015.03.051

An Experimental Study on the Macroscopic Spray Characteristics of Biodiesel and Diesel in a Constant Volume Chamber

Hongzhan Xie, Lanbo Song, Yizhi Xie, Dong Pi, Chunyu Shao and Qizhao Lin
Energies 8 (6) 5952 (2015)
https://doi.org/10.3390/en8065952