ogst
Home All issues Volume 62 / No 5 (September-October 2007) Oil & Gas Science and Technology - Rev. IFP, 62 5 (2007) 715-722 References
Open Access
Issue
Oil & Gas Science and Technology - Rev. IFP
Volume 62, Number 5, September-October 2007
Page(s) 715 - 722
DOI https://doi.org/10.2516/ogst:2007049
Published online 30 October 2007
  • Al-Sahhaf, T.A.,Fahim, M.A. and Elkilani, A.S. (2002) Retardationof asphaltene precipitation by addition of toluene, resins, deas-phalted oil and surfactants. Fluid Phase Equilibr., 194-197, 1045-1057. [CrossRef] [Google Scholar]
  • Andersen, S.I and Speight, J.G. (1999) Thermodynamic modelsfor asphaltene solubility and precipitation. J. Petrol. Sci. Eng., 22, 53-66. [CrossRef] [Google Scholar]
  • Asomaning, S. (2003) Test Methods for Determining Asphaltene Stability in Crude Oils. Petrol. Sci. Technol., 21, 581. [CrossRef] [Google Scholar]
  • Brandt, H.C.A., Hendriks, E.M., Michels, M.A.J. and Visser, F.(1995) Thermodynamic modeling of asphaltene stacking. J. Phys.Chem., 99, 10430. [Google Scholar]
  • Buch, L., Groenzin, H., Buenrostro-Gonzalez, E., Andersen, S.I.,Lira-Galeana, C. and Mullins, O.C. (2003) Molecular size of asphal-tene fractions obtained from residuum hydrotreatment. Fuel, 82, 1075-1084. [CrossRef] [Google Scholar]
  • Dabir, B.,Nematy, M.,Mehrabi, A.R.,Rassamdana, H. and Sahimi, M. (1996) Asphalt flocculation and deposition: III. Molecularweight distribution. Fuel, 75, 1633-1645. [CrossRef] [Google Scholar]
  • Diallo, M.S., Cagin, T., Faulon, J.L. and Goddard, III W.A. (1994) Thermodynamic Properties of Asphaltene Constituents: A Predictive Approach Based on Computer Assisted Structure Elucidation and Atomistic Simulations, in Asphaltene Constituentsand Asphalts, Developments in Petroleum Science, Yen, T.F. andChilingarian, G.V. (eds.), Elsevier, Amsterdam, The Netherlands, Chap. 5. [Google Scholar]
  • Goual, L. and Firoozabadi, A. (2002) Measuring Asphaltene con-stituents and Resins, and Dipole Moment in Petroleum Fluids. AIChE J., 48, 2646-2663. [Google Scholar]
  • Higuerey, I.,Rogel, E. and Pereira, P. (2001) Residue Stability Study in a Thermal Catalytic Steam Cracking Process Through Theoretical Estimation of the Solubility Parameter. Petrol. Sci. Technol., 19, 387. [CrossRef] [Google Scholar]
  • Hong, E. and Watkinson, P. (2004) A study of asphaltene solubilityand precipitation. Fuel, 83, 1881-1887. [CrossRef] [Google Scholar]
  • Janardhan, A.S. and Mansoori, G.A. (1993) Fractal nature of asphaltene aggregation. J. Petrol. Sci. Eng., 9, 17-27. [CrossRef] [Google Scholar]
  • Kokal, S.L.,Najman, J.,Sayegh, S.G. and George, A.E. (1992) J. Can. Petrol. Technol., 31, 24. [CrossRef] [Google Scholar]
  • Kokal, S., Tang, T., Schramm, L. and Sayegh, S. (1995) Electrokinetic and adsorption properties of asphaltene constituents.Colloid. Surface A, 94, 253-265. [Google Scholar]
  • Liao, Z. and Geng, A. (2000) Asphaltene constituents in oil reser-voir recovery. Chinese Sci. Bull., 45, 8. [Google Scholar]
  • Leontaritis, K.J. and Mansoori, G.A. (1992) A colloidal model forasphaltene flocculation from petroleum fluids. Iran. J. Sci. Technol., 16, 2-3, 249-267. [Google Scholar]
  • Magaril, R.Z.,Ramazeava, L.F. and Aksenova, E.I. (1971) Kinetics of Coke Formation in the Thermal Processing of Crude Oil. Int. Chem. Eng., 11, 250. [Google Scholar]
  • Mannistu, K.D., Yarranton, H.W. and Masliyah, J.H. (1997) Solubility modeling of asphaltene constituents in organic solvents.Energ. Fuel, 11, 615. [Google Scholar]
  • Mansoori, G.A. (1997) Modeling of asphaltene and other heavy organic deposition. J. Petrol. Sci. Eng., 17, 101. [CrossRef] [Google Scholar]
  • Marzin, R.,Pereira, P.,McGrath, M.J. and Feintuch, H.M. (1998) New residue process increases conversion, produces stable residue in Curacao refinery. Oil Gas J., 96, 44, 79. [Google Scholar]
  • Moschopedis, S.E. and Speight, J.G. (1976) Fuel, 55, 187. [CrossRef] [Google Scholar]
  • Moschopedis, S.E.,Ozum, B. and Speight, J.G. (1998) Upgrading Heavy Oils, Rev. Process Chem. Eng., 1, 201. [Google Scholar]
  • Olmstead, W.N. and Freund, H. (1998) Proceedings, AIChE Spring National Meeting, New Orleans, Louisiana. [Google Scholar]
  • Park, S.J. and Mansoori, G.A. (1988) Aggregation and deposition of heavy organics in petroleum. Int. J. Energ. Sources, 10, 109-125. [CrossRef] [MathSciNet] [Google Scholar]
  • Parra-Barraza, H.,Hernández-Montiel, D.,Lizardi, J.,Hernández, J.,Urbina, R.H. and Valdez, M.A. (2003) The zeta potential and surface properties of asphaltene constituents obtained with different crude oil/n-heptane proportions. Fuel, 82, 869-874. [CrossRef] [Google Scholar]
  • Pillon, L.Z. (2001) Effect of Dispersants and Flocculants on the Colloidal Stability of Asphaltene Constituents. Petrol. Sci. Technol., 19, 863. [CrossRef] [Google Scholar]
  • Sheu, E.Y. (2002) Petroleum asphaltene-properties, characterization, and issues. Energ. Fuel, 16, 74-82. [Google Scholar]
  • Sheu, E.Y.,Storm, D.A. and De Tar, M.M. (1991) Asphaltene constituents in polar solvents. J. Non-Cryst. Solids, 131-133, 1, 341-347. [Google Scholar]
  • Speight, J.G. (1987) Initial reactions in the coking of residua. Preprints, Am. Chem. Soc. Div. Petrol. Chem., 32, 2, 413. [Google Scholar]
  • Speight, J.G. (1994) Asphaltene Constituents and Asphalts. Developments in Petroleum Science, Yen, T.F. and Chilingarian, G.V. (eds.), Elsevier, Amsterdam, The Netherlands, Vol. 40, Chap. 2. [Google Scholar]
  • Speight, J.G. (1996) Asphaltene constituents in crude oil and bitumen: structure and dispersion, Advances in Chemistry Series. Am. Chem. Soc. Washington, DC, p. 251. [Google Scholar]
  • Speight, J.G. (1999) The chemical and physical structure ofp etroleum: effects on recovery operations. J. Petrol. Sci. Eng., 22, 1-3, 3-15. [CrossRef] [Google Scholar]
  • Speight, J.G. (2003) Thermal Cracking of Petroleum, in Natural and Laboratory-Simulated Thermal Geochemical Processes, Ikan, R. (éd.), Kluwer Academic Publishers Inc., Dordrecht, The Netherlands, Chap. 2. [Google Scholar]
  • Speight, J.G. (2004a) Petroleum asphaltene constituents - Part 1 - Asphaltene constituents, resins and the structure of petroleum. Oil Gas Sci. Technol., 59, 5, 467-477. [CrossRef] [EDP Sciences] [Google Scholar]
  • Speight, J.G. (2004b) Petroleum asphaltene constituents - Part 2 - The effect of asphaltene constituents and resin constituents on recovery and refining processes. Oil Gas Sci. Technol., 59, 5, 479-488. [CrossRef] [EDP Sciences] [Google Scholar]
  • Speight, J.G. (2006) The Chemistry and Technology of Petroleum, 4th ed., CRC Press, Taylor and Francis Group, Boca Raton, Florida. [Google Scholar]
  • Speight, J.G. and Long, R.B. (1996) The concept of asphaltene constituents revisite., Fuel Sci. Technol. Int., 14, 1. [CrossRef] [Google Scholar]
  • Speight, J.G. and Ozum, B. (2002) Petroleum Refining Processes, Marcel Dekker Inc., New York. [Google Scholar]
  • Speight, J.G.,Wernick, D.L.,Gould, K.A.,Overfield, R.E.,Rao, B.M.L. and Savage, D.W. (1985) Revue de l'Institut français du pétrole, 40, 51. [Google Scholar]
  • Wattana, P.,Wojciechowski, D.J.,Bolaños, G. and Fogler, H.S. (2003) Study of Asphaltene Precipitation Using Refractive Index Measurement. Petrol. Sci. Technol., 21, 591. [CrossRef] [Google Scholar]
  • Wiehe, I.A. (1993) A Phase-Separation Kinetic Model for Coke Formation. Ind. Eng. Chem. Res., 32, 2447-2554. [Google Scholar]
  • Wiehe, I.A. and Jermansen, T.G. (2003) Design of Synthetic Dispersants for Asphaltene constituents. Petrol. Sci. Technol., 21, 527. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.