ogst
Home All issues Volume 57 / No 2 (March-April 2002) Oil & Gas Science and Technology - Rev. IFP, 57 2 (2002) 155-168 References
Open Access
Issue
Oil & Gas Science and Technology - Rev. IFP
Volume 57, Number 2, March-April 2002
Page(s) 155 - 168
DOI https://doi.org/10.2516/ogst:2002012
Published online 01 December 2006
  • Pardos, F. (1999) Forecast for the World Plastics Industry to 2020. Plastics Engineering, 55, 11, 53-57. [Google Scholar]
  • Dupend-Brusselle, N. (2000) Comportement viscoélastoplastique d’un polymère semi-cristallin, le polypropylène, avant la striction : caractérisation expérimentale et modélisation phénoménologique. Thèse, université de technologie de Compiègne. [Google Scholar]
  • Olley, R.H. and Bassett, D.C. (1982) An Improved Permanganic Etchant for Polyolefines. Polymer, 23, 11, 1707-1710. [CrossRef] [Google Scholar]
  • Popelar, C.F.,Popelar, C.H. and Kenner, V.H. (1990) Viscoelastic Material Characterization and Modeling for Polyethylene. Polymer Engineering and Science, 30, 10, 577-586. [CrossRef] [Google Scholar]
  • Zhang, C. and Moore, I.D. (1997) Nonlinear Mechanical Response of High Density Polyethylene. Part I: Experimental Investigation and Model Evaluation. Part II: Uniaxial Constitutive Modeling. Polymer Engineering and Science, 37, 2, 404-420. [CrossRef] [Google Scholar]
  • Kitagawa, M. and Matsutani, T. (1988) Effect of Time and Temperature on Nonlinear Constitutive Equation in Polypropylene. Journal of Materials Science, 23, 4085-4090. [CrossRef] [Google Scholar]
  • Brusselle-Dupend, N.,Lai, D.,Feaugas, X.,Guigon, M. and Clavel, M. (2001) Mechanical Behavior of a Semicrystalline Polymer before Necking. Part I: Characterization of Uniaxial Behavior. Polymer Engineering and Science, 41, 1, 66-76. [CrossRef] [Google Scholar]
  • Zener, C. (1948) Elasticity and Anelasticity of Metals, Chicago University Press, Chicago. [Google Scholar]
  • Prager, W. and Hodge, P.G. (1951) Theory of Perfectly Plastics Solids, John Wiley and Sons, New York. [Google Scholar]
  • Cottrell, A.H. (1953) Dislocations and Plastic Flow in Polycristals, Oxford University Press, London. [Google Scholar]
  • Kuhlmann-Wilsdorf, D. and Laird, C. (1979) Dislocation Behavior in Fatigue. II. Friction Stress and Back Stress as Inferred from an Analysis of Hysteresis Loops. Material Science and Engineering, 37, 2, 111-120. [CrossRef] [Google Scholar]
  • Dickson, J.I.,Boutin, J. and Handfield, L. (1984) A Comparison of Two Simple Methods for Measuring Cyclic Internal and Effective Stresses. Material Science and Engineering, 64, 1, L7-11. [CrossRef] [Google Scholar]
  • Feaugas, X. (1994) Microstructure et modélisation du comportement en fatigue uniaxiale et multiaxiale d’un alliage de titane biphasé.Thèse, université de technologie de Compiègne. [Google Scholar]
  • Feaugas, X. (1999) Contribution à la compréhension des mécanismes de déformation plastique et d’endommagement des matériaux : un point de vue expérimental. Habilitation à diriger des recherches, université de technologie de Compiègne. [Google Scholar]
  • Feaugas, X. (1999) On the Origin of the Tensile Flow Stress in the Stainless AISI 316L at 300 K: Back Stress and Effective Stress. Acta Materiala, 47, 13, 3617-3632. [Google Scholar]
  • Chaboche, J.L. (1995) Formalisme général des lois de comportement : application aux métaux et polymères, in Introduction à la mécanique des polymères, G’Sell, C. and Haudin, J.M.(éd.), Institut national polytechnique de Lorraine. [Google Scholar]
  • Pilvin, P. (1999) Manuel d’utilisation du logiciel SiDoLo (Simulation et iDentification de Lois de comportement), École centrale de Paris. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.