ogst
Home All issues Volume 76 (2021) Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 76 (2021) 67 References
Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 76, 2021
Article Number 67
Number of page(s) 15
DOI https://doi.org/10.2516/ogst/2021043
Published online 06 October 2021
  • Aalaie J., Vasheghani-Farahani E., Rahmatpour A., Semsarzadeh M.A. (2008) Effect of montmorillonite on gelation and swelling behavior of sulfonated polyacrylamide nanocomposite hydrogels in electrolyte solutions, Eur. Polym. J. 44, 2024–2031. [Google Scholar]
  • Abdulbaki M., Huh C., Sepehrnoori K., Delshad M., Varavei A. (2014) A critical review on use of polymer microgels for conformance control purposes, J. Pet. Sci. Eng. 122, 741–753. [Google Scholar]
  • Adewunmi A.A., Ismail S., Sultan A.S. (2018) Crosslinked polyacrylamide composite hydrogels impregnated with fly ash: Synthesis, characterization and their application as fractures sealant for high water producing zones in oil and gas wells, J. Polym. Environ. 26, 3294–3306. [Google Scholar]
  • Al-Anazi H.A., Sharma M.M. (2002) Use of a pH sensitive polymer for conformance control, in: International Symposium and Exhibition on Formation Damage Control, February 20–21, 2002, Lafayette, Louisiana. [Google Scholar]
  • Al-Muntasheri G.A., Nasr-El-Din H.A., Hussein I.A. (2007) A rheological investigation of a high temperature organic gel used for water shut-off treatments, J. Pet. Sci. Eng. 59, 73–83. [Google Scholar]
  • Al-Muntasheri G.A., Nasr-El-Din H.A., Zitha P.L.J. (2008) Gelation kinetics and performance evaluation of an organically crosslinked gel at high temperature and pressure, SPE J. 13, 337–345. [CrossRef] [Google Scholar]
  • Arsad A., Rahmat A.R., Hassan A., Mokhtar M., Dali S.N.M. (2013) Flow characteristics and dynamic behavior of polyamide 6/acrylonitile butadiene styrene (PA6/ABS) blends, Int. J. Polym. Mater. Polym. Biomater. 62, 209–214. [Google Scholar]
  • Asloun E.M., Nardin M., Schultz J. (1989) Stress transfer in single-fibre composites: Effect of adhesion, elastic modulus of fibre and matrix, and polymer chain mobility, J. Mater. Sci. 24, 1835–1844. [Google Scholar]
  • Bailey B., Crabtree M., Tyrie J., Elphick J., Kuchuk F., Romano C., Roodhart L. (2000) Water control, Oilfield Rev. 12, 30–51. [Google Scholar]
  • Bokuniaeva A.O., Vorokh A.S. (2019) Estimation of particle size using the Debye equation and the Scherrer formula for polyphasic TiO2 powder, in, J. Phys. Conf. Ser., 1410, 012057. [Google Scholar]
  • Chen L., Wang J., Yu L., Zhang Q., Fu M., Zhao Z., Zuo J. (2018) Experimental investigation on the nanosilica-reinforcing polyacrylamide/polyethylenimine hydrogel for water shutoff treatment, Energy Fuels 32, 6650–6656. [Google Scholar]
  • Chua H.N., Sung W.-K., Wong L. (2007) Using indirect protein interactions for the prediction of Gene Ontology functions, in: BMC Bioinformatics, BioMed Central, La Jolla, CA, USA, S8 p. [CrossRef] [PubMed] [Google Scholar]
  • Dai C., Zhao J., Yan L., Zhao M. (2014) Adsorption behavior of cocamidopropyl betaine under conditions of high temperature and high salinity, J. Appl. Polym. Sci. 131, 40424. [Google Scholar]
  • Dang Cuong T.Q., Chen Z., Nguyen Ngoc T.B., Bae W., Phung T.H. (2011) Development and optimization of polymer conformance control technology in mature reservoirs: Laboratory experiments vs. field scale simulation, in: SPE Paper 144221 Presented at SPE Enhanced Oil Recovery Conference, Kuala Lumpur, Malaysia, pp. 19–21. [Google Scholar]
  • Elewaut K., Stavland A., Zaitoun A., Krilov Z., Zitha P.L.J. (2005) Investigation of a novel chemical for bullhead water shutoff treatments, in: SPE European Formation Damage Conference, May 25–27, 2005, Sheveningen, The Netherlands. [Google Scholar]
  • El-Mekawy R.E., Jassas R.S. (2017) Recent trends in smart and flexible three-dimensional cross-linked polymers: synthesis of chitosan–ZnO nanocomposite hydrogels for insulin drug delivery, MedChemComm 8, 897–906. [CrossRef] [PubMed] [Google Scholar]
  • Elsharafi M.O., Bai B. (2012) Effect of weak preformed particle gel on unswept oil zones/areas during conformance control treatments, Ind. Eng. Chem. Res. 51, 11547–11554. [Google Scholar]
  • Evingür G.A., Pekcan Ö. (2014) Effect of multiwalled carbon nanotube (MWNT) on the behavior of swelling of polyacrylamide–MWNT composites, J. Reinf. Plast. Compos. 33, 1199–1206. [Google Scholar]
  • Farasat A., Sefti M.V., Sadeghnejad S., Saghafi H.R. (2017) Effects of reservoir temperature and water salinity on the swelling ratio performance of enhanced preformed particle gels, Korean J. Chem. Eng. 34, 1509–1516. [Google Scholar]
  • Fuseni A.B., AlSofi A.M., AlJulaih A.H., AlAseeri A.A. (2018) Development and evaluation of foam-based conformance control for a high-salinity and high-temperature carbonate, J. Pet. Explor. Prod. Technol. 8, 1341–1348. [Google Scholar]
  • Gaca K.Z., Parkinson J.A., Sefcik J. (2017) Kinetics of early stages of resorcinol-formaldehyde polymerization investigated by solution-phase nuclear magnetic resonance spectroscopy, Polymer 110, 62–73. [Google Scholar]
  • Gaca K.Z., Sefcik J. (2013) Mechanism and kinetics of nanostructure evolution during early stages of resorcinol–formaldehyde polymerisation, J. Colloid Interf. Sci. 406, 51–59. [Google Scholar]
  • Goudarzi A., Almohsin A., Varavei A., Delshad M., Bai B., Sepehrnoori K. (2014) New experiments and models for conformance control microgels, in: SPE Improved Oil Recovery Symposium, April 12–16, 2014, Tulsa, Oklahoma, USA. [Google Scholar]
  • Goudarzi A., Zhang H., Varavei A., Taksaudom P., Hu Y., Delshad M., Bai B., Sepehrnoori K. (2015) A laboratory and simulation study of preformed particle gels for water conformance control, Fuel 140, 502–513. [CrossRef] [Google Scholar]
  • Gun’ko V.M., Savina I.N., Mikhalovsky S.V. (2017) Properties of water bound in hydrogels, Gels 3, 37. [Google Scholar]
  • Helvacıoğlu E., Aydın V., Nugay T., Nugay N., Uluocak B.G., Şen S. (2011) High strength poly (acrylamide)-clay hydrogels, J. Polym. Res. 18, 2341–2350. [Google Scholar]
  • Jaisai M., Baruah S., Dutta J. (2012) Paper modified with ZnO nanorods–antimicrobial studies, Beilstein J. Nanotechnol. 3, 684–691. [CrossRef] [PubMed] [Google Scholar]
  • Jia H., Ren Q., Li Y.M., Ma X.P. (2016) Evaluation of polyacrylamide gels with accelerator ammonium salts for water shutoff in ultralow temperature reservoirs: Gelation performance and application recommendations, Petroleum 2, 90–97. [Google Scholar]
  • Jiang L., Liu P. (2014) Design of magnetic attapulgite/fly ash/poly (acrylic acid) ternary nanocomposite hydrogels and performance evaluation as selective adsorbent for Pb2+ ion, ACS Sustain. Chem. Eng. 2, 1785–1794. [Google Scholar]
  • Kalgaonkar R., Wagle V., Alnoaimi K., Alhussain I. (2017) Novel compositions based on nanomaterials designed for use as conformance sealants, in: Abu Dhabi International Petroleum Exhibition & Conference, November 13–16, 2017, Abu Dhabi, UAE. [Google Scholar]
  • Karimi S., Esmaeilzadeh F., Mowla D. (2014) Identification and selection of a stable gel polymer to control or reduce water production in gas condensate fields, J. Nat. Gas Sci. Eng. 21, 940–950. [CrossRef] [Google Scholar]
  • Kumar A., Mahto V., Sharma V.P. (2020) Reinforced preformed particle gel: Synthesis, characterization and performance evaluation for water shut-off jobs in heterogeneous reservoir, J. Pet. Sci. Eng. 193, 107408. [Google Scholar]
  • Kumar A., Mahto V., Sharma V.P. (2019) Development of fly ash reinforced nanocomposite preformed particle gel for the control of excessive water production in the mature oil fields, Oil Gas Sci. Technol. – Revue d’IFP Energies nouvelles 74, 8. [Google Scholar]
  • Langford J.Il., Wilson A.J.C. (1978) Scherrer after sixty years: A survey and some new results in the determination of crystallite size, J. Appl. Crystallogr. 11, 102–113. [Google Scholar]
  • Lashari Z.A., Yang H., Zhu Z., Tang X., Cao C., Iqbal M.W., Kang W. (2018) Experimental research of high strength thermally stable organic composite polymer gel, J. Mol. Liq. 263, 118–124. [Google Scholar]
  • Li G., Zhang G., Wang L. (2013) Smart profile control by salt-reversible flocculation of cationic microgels and polyacrylamide, Energy Fuels 27, 6632–6636. [Google Scholar]
  • Li T., Cao M., Liang J., Xie X., Du G. (2017) Mechanism of base-catalyzed resorcinol-formaldehyde and phenol-resorcinol-formaldehyde condensation reactions: A theoretical study, Polymers 9, 426. [Google Scholar]
  • Li Z., Tang M., Dai J., Wang T., Bai R. (2016) Effect of multiwalled carbon nanotube-grafted polymer brushes on the mechanical and swelling properties of polyacrylamide composite hydrogels, Polymer 85, 67–76. [Google Scholar]
  • Liu Y., Bai B., Wang Y. (2010) Applied technologies and prospects of conformance control treatments in China, Oil Gas Sci. Technol. - Revue d’IFP Energies nouvelles 65, 859–878. [Google Scholar]
  • Liu Y., Dai C., Wang K., Zhao M., Zhao G., Yang S., Yan Z., You Q. (2016) New insights into the hydroquinone (HQ)–hexamethylenetetramine (HMTA) gel system for water shut-off treatment in high temperature reservoirs, J. Ind. Eng. Chem. 35, 20–28. [Google Scholar]
  • Liu Y., Dai C., Wang K., Zou C., Gao M., Fang Y., Zhao M., Wu Y., You Q. (2017) Study on a novel cross-linked polymer gel strengthened with silica nanoparticles, Energy Fuels 31, 9152–9161. [Google Scholar]
  • Ma K., Li A., Guo S., Pang J., Xue Y., Zhou Z. (2019) Techniques for improving the water-flooding of oil fields during the high water-cut stage, Oil Gas Sci. Technol. – Revue d’IFP Energies nouvelles 74, 69. [Google Scholar]
  • Mallakpour S., Javadpour M. (2016) The potential use of recycled PET bottle in nanocomposites manufacturing with modified ZnO nanoparticles capped with citric acid: Preparation, thermal, and morphological characterization, RSC Adv. 6, 15039–15047. [Google Scholar]
  • Michael F.M., Fathima A., AlYemni E., Jin H., Almohsin A., Alsharaeh E.H. (2018) Enhanced polyacrylamide polymer gels using zirconium hydroxide nanoparticles for water shutoff at high temperatures: Thermal and rheological investigations, Ind. Eng. Chem. Res. 57, 16347–16357. [Google Scholar]
  • Moradi-Araghi A. (2000) A review of thermally stable gels for fluid diversion in petroleum production, J. Pet. Sci. Eng. 26, 1–10. [Google Scholar]
  • Okay O., Oppermann W. (2007) Polyacrylamide- clay nanocomposite hydrogels: Rheological and light scattering characterization, Macromolecules 40, 3378–3387. [Google Scholar]
  • Park H.E., Gasek N., Hwang J., Weiss D.J., Lee P.C. (2020) Effect of temperature on gelation and cross-linking of gelatin methacryloyl for biomedical applications, Phys. Fluids 32, 33102. [Google Scholar]
  • Reena, Kumar A., Mahto V., Choubey A.K. (2020) Synthesis and characterization of cross-linked hydrogels using polyvinyl alcohol and polyvinyl pyrrolidone and their blend for water shut-off treatments, J. Mol. Liq. 301, 112472. [Google Scholar]
  • Rezaei A., Abdi-Khangah M., Mohebbi A., Tatar A., Mohammadi A.H. (2016) Using surface modified clay nanoparticles to improve rheological behavior of Hydrolized Polyacrylamid (HPAM) solution for enhanced oil recovery with polymer flooding, J. Mol. Liq. 222, 1148–1156. [Google Scholar]
  • Saikia T., Sultan A.S. (2020) Development of silane-modified colloidal silica pickering emulsion stabilized by organophilic micronized phyllosilicate for conformance control, J. Pet. Sci. Eng. 194, 107427. [Google Scholar]
  • Sang Q., Li Y., Yu L., Li Z., Dong M. (2014) Enhanced oil recovery by branched-preformed particle gel injection in parallel-sandpack models, Fuel 136, 295–306. [CrossRef] [Google Scholar]
  • Seright R.S. (1991) Impact of dispersion on gel placement for profile control, SPE Reserv. Eng. 6, 343–352. [CrossRef] [Google Scholar]
  • Sharifpour E., Riazi M., Ayatollahi S. (2015) Smart technique in water shutoff treatment for a layered reservoir through an engineered injection/production scheme, Ind. Eng. Chem. Res. 54, 11236–11246. [Google Scholar]
  • Singh R., Mahto V., Vuthaluru H. (2018) Development of a novel fly ash-polyacrylamide nanocomposite gel system for improved recovery of oil from heterogeneous reservoir, J. Pet. Sci. Eng. 165, 325–331. [Google Scholar]
  • Srivastava V., Choubey A.K. (2020) Kinetic and isothermal study of effect of transition metal doping on adsorptive property of zinc oxide nanoparticles synthesized via green route using Moringa oleifera leaf extract, Mater. Res. Expr. 6, 1250i7. [Google Scholar]
  • Sudha, Mishra B.M., Kumar D. (2014) Effect of multiwalled carbon nanotubes on the conductivity and swelling properties of porous polyacrylamide hydrogels, Part. Sci. Technol. 32, 624–631. [Google Scholar]
  • Sydansk R.D., Moore P.E. (1992) Gel conformance treatments increase oil production in Wyoming, Oil and Gas Journal, United States, 90 p. [Google Scholar]
  • Sydansk R.D. (1990) A newly developed chromium (III) gel technology, SPE Reserv. Eng. 5, 346–352. [Google Scholar]
  • Tongwa P., Baojun B. (2015) A more superior preformed particle gel with potential application for conformance control in mature oilfields, J. Pet. Explor. Prod. Technol. 5, 201–210. [Google Scholar]
  • Tongwa P., Nygaard R., Bai B. (2013) Evaluation of a nanocomposite hydrogel for water shut-off in enhanced oil recovery applications: Design, synthesis, and characterization, J. Appl. Polym. Sci. 128, 787–794. [Google Scholar]
  • Wassmuth F.R., Green K., Hodgins L. (2004) Water shutoff in gas wells: Proper gel placement is the key to success, in: SPE/DOE Symposium on Improved Oil Recovery, April 17–21, 2004, Tulsa, Oklahoma. [Google Scholar]
  • Xindi S.U.N., Baojun B.A.I. (2017) Comprehensive review of water shutoff methods for horizontal wells, Petrol. Explor. Develop. 44, 1022–1029. [Google Scholar]
  • Zhang C., Qu G., Song G. (2017) Formulation development of high strength gel system and evaluation on profile control performance for high salinity and low permeability fractured reservoir, Int. J. Anal. Chem. 2017, 1–9 [Google Scholar]
  • Zhao G., Dai C., Chen A., Yan Z., Zhao M. (2015) Experimental study and application of gels formed by nonionic polyacrylamide and phenolic resin for in-depth profile control, J. Pet. Sci. Eng. 135, 552–560. [Google Scholar]
  • Zhao G., Dai C., You Q., Zhao M., Zhao J. (2013) Study on formation of gels formed by polymer and zirconium acetate, J. Sol-Gel Sci. Technol. 65, 392–398. [Google Scholar]
  • Zhao G., Dai C., Zhao M., You Q. (2014) The use of environmental scanning electron microscopy for imaging the microstructure of gels for profile control and water shutoff treatments, J. Appl. Polym. Sci. 131, 39946. [Google Scholar]
  • Zhu D., Hou J., Wei Q., Wu X., Bai B. (2017) Terpolymer gel system formed by resorcinol-hexamethylenetetramine for water management in extremely higherature reservoirs, Energy and Fuels 31, 1519–1528. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.