ogst
Home All issues Volume 75 (2020) Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 75 (2020) 1 References
Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 75, 2020
Article Number 1
Number of page(s) 8
DOI https://doi.org/10.2516/ogst/2019066
Published online 15 January 2020
  • Ball A.S., Stewart R.J., Schliephake K. (2012) A review of the current options for the treatment and safe disposal of drill cuttings, Waste Manag. Res. 30, 5, 457–473. doi: 10.1177/0734242X11419892. [CrossRef] [PubMed] [Google Scholar]
  • Caenn R., Darley H.C.H., Gray G.R. (2017) Chapter 1 – Introduction to drilling fluids, in: Composition and Properties of Drilling and Completion Fluids, seventh edition, Gulf Professional Publishing, Boston, pp. 1–34. doi: 10.1016/B978-0-12-804751-4.00001-8. [Google Scholar]
  • Dalmazzone Ch, Blanchet D., Lamoureux S., Dutrieux E., Durrieu J., Camps R., Galgani F. (2004) Impact of drilling activities in warm sea: Recolonization capacities of seabed, Oil Gas Sci. Technol. - Rev. IFP Energies nouvelles 59, 6, 625–647. doi: 10.2516/ogst:2004045. [CrossRef] [Google Scholar]
  • Fagundes F.M., Santos N.B.C., Damasceno J.J.R., Arouca F.O. (2018) Study on the stability of a shear-thinning suspension used in oil well drilling, Oil Gas Sci. Technol. - Rev. IFP Energies nouvelles 73, 10. doi: 10.2516/ogst/2018007. [Google Scholar]
  • Hermoso J., Martínez-Boza F.J., Gallegos C. (2017) Modeling pressure-viscosity behavior of oil-based drilling fluids, Oil Gas Sci. Technol. - Rev. IFP Energies nouvelles 72, 4, 18. doi: 10.2516/ogst/2017014. [Google Scholar]
  • Junior I.P., Martins A.L., Ataíde C.H., Duarte C.R. (2017) Microwave drying remediation of petroleum-contaminated drill cuttings, J. Environ. Manag. 196, 659–665. doi: 10.1016/j.jenvman.2017.03.068. [CrossRef] [Google Scholar]
  • Li D., Zhang Y., Quan X., Zhao Y. (2009) Microwave thermal remediation of crude oil contaminated soil enhanced by carbon fiber, J. Environ. Sci. 21, 9, 1290–1295. doi: 10.1016/S1001-0742(08)62417-1. [CrossRef] [Google Scholar]
  • Lu Q., Dong C., Zhang X., Tian H., Yang Y., Zhu X. (2011) Selective fast pyrolysis of biomass impregnated with ZnCl2 to produce furfural: Analytical Py-GC/MS study, J. Anal. Appl. Pyrolysis 90, 2, 204–212. doi: 10.1016/j.jaap.2010.12.007. [Google Scholar]
  • Mujumdar A.S. (2015) Handbook of industrial drying, CRC Press, Taylor & Francis Group, Boca Raton, FL. doi: 10.1080/07373937.2014.983704. [Google Scholar]
  • Nelson D.J., Brammer C., Li R. (2009) Substituent effects in acid-catalyzed hydration of alkenes, measured under consistent reaction conditions, Tetrahedron Lett. 50, 47, 6454–6456. doi: 10.1016/j.tetlet.2009.08.128. [Google Scholar]
  • Pereira M.S., Panisset C.M.Á., Martins A.L., Sá C.H.M., Barrozo M.A.S., Ataíde C.H. (2014) Microwave treatment of drilled cuttings contaminated by synthetic drilling fluid, Sep. Purif. Technol. 124, 68–73. doi: 10.1016/j.seppur.2014.01.011. [Google Scholar]
  • Pereira M.S., Santos J.M., Barrozo M.A.S., Ataíde C.H., Martins A.L. (2015) Decontamination of drilled cuttings by microwave drying: Kinetics aspects, Braz. J. Pet. Gas 9, 1, 1–10. doi: 10.5419/bjpg2015-0001. [CrossRef] [Google Scholar]
  • Petri I.J., Pereira M.S., Santos J.M., Duarte C.R., Ataíde C.H., Panisset C.M.Á. (2015) Microwave remediation of oil well drill cuttings, J. Pet. Sci. Eng. 134, 23–29. doi: 10.1016/j.petrol.2015.07.022. [Google Scholar]
  • Petri I.J., Martins A.L., Duarte C.R., Ataíde C.H. (2019) Development and performance of a continuous industrial microwave dryer for remediation of drill cuttings, J. Pet. Sci. Eng. 176, 362–368. doi: 10.1016/j.petrol.2019.01.075. [Google Scholar]
  • Peysson Y. (2004) Solid/liquid dispersions in drilling and production, Oil Gas Sci. Technol. - Rev. IFP Energies nouvelles 59, 1, 11–21. doi: 10.2516/ogst:2004002. [CrossRef] [Google Scholar]
  • Robinson J.P., Kingman S.W., Snape C.E., Barranco R., Shang H., Bradley M.S.A., Bradshaw S.M. (2009) Remediation of oil-contaminated drill cuttings using continuous microwave heating, Chem. Eng. J. 152, 2–3, 458–463. doi: 10.1016/j.cej.2009.05.008. [Google Scholar]
  • Robinson J.P., Kingman S.W., Snape C.E., Bradshaw S.M., Bradley M.S.A., Shang H., Barranco R. (2010) Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings, Chem. Eng. Res. Des. 88, 2, 146–154. doi: 10.1016/j.cherd.2009.07.011. [Google Scholar]
  • Rossi A.S., Faria M.G., Pereira M.S., Ataíde C.H. (2017) Kinetics of microwave heating and drying of drilling fluids and drill cuttings, Dry. Technol. 35, 9, 1130–1140. doi: 10.1080/07373937.2016.1233425. [CrossRef] [Google Scholar]
  • Santos J.M., Pereira M.S., Júnior I.P., Pena M.M.R., Ataíde C.H. (2014) Microwave drying of drilled cuttings in the context of waste disposal and drilling fluid recovery, Energy Technol. 2, 9–10, 832–838. doi: 10.1002/ente.201402053. [CrossRef] [Google Scholar]
  • Santos J.M., Petri I.J., Mota A.C.S., Morais A.S., Ataíde C.H. (2018) Optimization of the batch decontamination process of drill cuttings by microwave heating, J. Pet. Sci. Eng. 163, 349–358. doi: 10.1016/j.petrol.2018.01.003. [Google Scholar]
  • Shang H., Snape C.E., Kingman S.W., Robinson J.P. (2005) Treatment of oil-contaminated drill cuttings by microwave heating in a high-power single-mode cavity, Ind. Eng. Chem. Res. 44, 17, 6837–6844. doi: 10.1021/ie0500772. [Google Scholar]
  • Shang H., Snape C.E., Kingman S.W., Robinson J.P. (2006) Microwave treatment of oil-contaminated north sea drill cuttings in a high power multimode cavity, Sep. Purif. Technol. 49, 1, 84–90. doi: 10.1016/j.seppur.2005.08.012. [Google Scholar]
  • Velde B. (1995) Composition and mineralogy of clay minerals, Springer, Berlin, Heidelberg, pp. 8–42. doi: 10.1007/978-3-662-12648-6_2. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.