Open Access
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 74, 2019
Article Number 18
Number of page(s) 13
Published online 05 March 2019
  • Cao S.L., Peng G.Y., Yu Z.Y. (2005) Hydrodynamic design of rotodynamic pump impeller for multiphase pumping by combined approach of inverse design and CFD analysis, J. Fluids Eng. 127, 330–338. [Google Scholar]
  • Caridad J., Kenyery F. (2004) CFD analysis of electric submersible pumps (ESP) handling two-phase mixtures, J. Energy Resour. 126, 99–104. [CrossRef] [Google Scholar]
  • Caridad J., Asuaje M., Kenyery F., Tremante A., Aguillon O. (2008) Characterization of a centrifugal pump impeller under two-phase flow conditions, J. Pet. Sci. Eng. 63, 18–22. [Google Scholar]
  • Chen E., et al. (2016) Numerical investigation on vibration and noise induced by unsteady flow in an axial-flow pump, J. Mech. Sci. Technol. 30, 5397–5404. [CrossRef] [Google Scholar]
  • Ding H., Visser F.C., Jiang Y., Furmanczyk M. (2011) Demonstration and validation of a 3D CFD simulation tool predicting pump performance and cavitation for industrial applications, J. Fluids Eng. 133, 1–13. [Google Scholar]
  • Feng J.J., Benra F.K., Dohmen H.J. (2010) Application of different turbulence models in unsteady flow simulations of a radial diffuser pump, Forsch. Ingenieurwes. 74, 123–133. [CrossRef] [Google Scholar]
  • Feng J.J., Luo X., Guo P., Wu G. (2016) Influence of tip clearance on pressure fluctuations in an axial flow pump, J. Mech. Sci. Technol. 30, 1603–1610. [CrossRef] [Google Scholar]
  • Franke M. (2009) Aspects of numerical simulation of turbomachinery flowsEingeladener Vortrag am Institut für Technische und Angewandte Mechanik der TU Warschau, SAS IP Inc., Polen. [Google Scholar]
  • González J., Parrondo J., Santolaria C., Blanco E. (2006) Steady and unsteady radial forces for a centrifugal pump with impeller to tongue gap variation, J. Fluids Eng. 128, 454–462. [Google Scholar]
  • Hayashi I., Kaneko S. (2014) Pressure pulsations in piping system excited by a centrifugal turbomachinery taking the damping characteristics into consideration, J. Fluids Struct. 45, 216–234. [Google Scholar]
  • Kim J.H., et al. (2015) Improvement of hydrodynamic performance of a multiphase pump using design of experiment techniques, J. Fluids Eng. 137, 1–15. [Google Scholar]
  • Kocaaslan O., Ozgoren M., Babayigit O., Aksoy M.H. (2017) Numerical investigation of the effect of number of blades on centrifugal pump performance, American Institute of Physics Conference Series 1863, 1–4. [Google Scholar]
  • Konno A., Kato H., Yamaguchi H., Maeda M. (2001) On the collapsing behavior of cavitation bubble clusters, JSME Int. J. 45, 631–637. [CrossRef] [Google Scholar]
  • Lane G.L., Schwarz M.P., Evans G.M. (2005) Numerical modelling of gas-liquid flow in stirred tanks, Chem. Eng. Sci. 60, 2203–2214. [Google Scholar]
  • Liu X.B., Hu Q.Y., Shi G.T., Zeng Y.Z., Wang H.Y. (2017a) Research on transient dynamic characteristics of three-stage axial-flow multi-phase pumps influenced by gas volume fractions, Adv. Mech. Eng. 9, 1–10. [Google Scholar]
  • Liu Y., Tan L., Liu M., Hao Y., Xu Y. (2017b) Influence of prewhirl angle and axial distance on energy performance and pressure fluctuation for a centrifugal pump with inlet guide vanes, Energies 10, 1–14. [Google Scholar]
  • Ma Y., Ni Y., Zhang H., Zhou S., Deng H. (2018) Influence of valve’s lag characteristic on pressure pulsation and performance of reciprocating multiphase pump, J. Pet. Sci. Eng. 164, 584–594. [Google Scholar]
  • Majidi K. (2005) Numerical study of unsteady flow in a centrifugal pump, J. Turbomach. 127, 805–814. [Google Scholar]
  • Menter F.R. (1994) 2-equation eddy-viscosity turbulence models for engineering applications, AIAA J. 32, 1598–1605. [Google Scholar]
  • Minemura K., Murakami M. (1980) A theoretical-study on air bubble motion in a centrifugal pump impeller, J. Fluids Eng. 102, 446–455. [Google Scholar]
  • Minemura K., Uchiyama T. (1993) 3-dimensional calculation of air-water 2-phase flow in centrifugal pump impeller based on a bubbly flow model, J. Fluids Eng. 115, 766–771. [Google Scholar]
  • Miorini R.L., Wu H., Katz J. (2012) The internal structure of the tip leakage vortex within the rotor of an axial waterjet pump, J. Turbomach. 134, 403–419. [Google Scholar]
  • Miyabe M., Maeda H., Umeki I., Jittani Y. (2006) Unstable head-flow characteristic generation mechanism of a low specific speed mixed flow pump, J. Therm. Sci. 15, 115–120. [CrossRef] [Google Scholar]
  • Ni Y., Zhu R., Zhang X., Pan Z. (2018) Numerical investigation on radial impeller induced vortex rope in draft tube under partial load conditions, J. Mech. Sci. Technol. 32, 157–165. [CrossRef] [Google Scholar]
  • Nishida M., et al. (2016) Long-term durability test of axial-flow ventricular assist device under pulsatile flow, J. Artif. Organs 20, 1–8. [Google Scholar]
  • Pineda H., et al. (2016) Phase distribution analysis in an Electrical Submersible Pump (ESP) inlet handling water-air two-phase flow using Computational Fluid Dynamics (CFD), J. Pet. Sci. Eng. 139, 49–61. [Google Scholar]
  • Qu W.S., Tan L., Cao S.L., Wang Y.C., Xu Y. (2016) Numerical investigation of clocking effect on a centrifugal pump with inlet guide vanes, Eng. Comput. 33, 465–481. [Google Scholar]
  • SAS IP, Inc (2013) ANSYS TurboGrid Users Guide, Release 15.0, Pittsburgh, PA, USA. [Google Scholar]
  • Shuai Z.J., Li W.Y., Zhang X.Y., Jiang C.X., Li F.C. (2014) Numerical study on the characteristics of pressure fluctuations in an axial-Flow water pump, Adv. Mech. Eng. 2, 1–7. [Google Scholar]
  • Stel H., Sirino T., Ponce F.J., Chiva S., Morales R.E.M. (2015) Numerical investigation of the flow in a multistage electric submersible pump, J. Pet. Sci. Eng. 136, 41–54. [Google Scholar]
  • Suh J.W., et al. (2017) Multi-objective optimization of the hydrodynamic performance of the second stage of a multi-phase pump, Energies 10, 1–21. [Google Scholar]
  • Suh J.W., et al. (2018) Development of numerical Eulerian-Eulerian models for simulating multiphase pumps, J. Pet. Sci. Eng. 162, 588–601. [Google Scholar]
  • Tan L., Zhu B.S., Cao S.L., Wang Y.C., Wang B.B. (2014) Influence of prewhirl regulation by inlet guide vanes on cavitation performance of a centrifugal pump, Energies 7, 1050–1065. [Google Scholar]
  • Tan L., Zhang J.S. (2018) Energy performance and pressure fluctuation of a multiphase pump with different gas volume fractions, Energies 11, 1–14. [Google Scholar]
  • Xie C., et al. (2018) Numerical calculation of axial-flow pump’s pressure fluctuation and model test analysis, Adv. Mech. Eng. 10, 1–13. [Google Scholar]
  • Xu Y., Tan L., Liu Y., Cao S. (2017) Pressure fluctuation and flow pattern of a mixed-flow pump with different blade tip clearances under cavitation condition, Adv. Mech. Eng. 9, 1–12. [Google Scholar]
  • Yakhot V., Orszag S.A., Thangam S., Gatski T.B., Speziale C.G. (1992) Development of turbulence models for shear Flows by a double expansion technique, Phys. Fluids A-Fluid Dyn. 4, 1510–1520. [Google Scholar]
  • Yan D., Kovacevic A., Tang Q., Rane S., Zhang W.H. (2017) Numerical modelling of twin-screw pumps based on computational fluid dynamics, Proc. Inst. Mech. Eng., Part C: J. Mach. Eng. Sci. 231, 4617–4634. [CrossRef] [Google Scholar]
  • Yu Z.Y., Zhu B.S., Cao S.L., Liu Y. (2014) Effect of virtual mass force on the mixed transport process in a multiphase rotodynamic pump, Adv. Mech. Eng. 2, 1–7. [Google Scholar]
  • Yu Z.Y., Zhu B.S., Cao S.L. (2015) Interphase force analysis for air-water bubbly flow in a multiphase rotodynamic pump, Eng. Comput. 32, 2166–2180. [Google Scholar]
  • Zhang K.W. (2000) Theory of fluid machinery, Vol. 1, China Machine Press, Beijing, China. [Google Scholar]
  • Zhang Y., Zhang J., Zhu H., Cai S. (2014) 3D blade hydraulic design method of the rotodynamic multiphase pump impeller and performance research, Adv. Mech. Eng. 1, 1–10. [Google Scholar]
  • Zhang J., Cai S., Zhu H., Zhang Y. (2015) Experimental investigation of the flow at the entrance of a rotodynamic multiphase pump by visualization, J. Pet. Sci. Eng. 126, 254–261. [Google Scholar]
  • Zhang W., Yu Z., Zhu B. (2017a) Influence of tip clearance on pressure fluctuation in low specific speed mixed-flow pump passage, Energies 10, 1–16. [Google Scholar]
  • Zhang W., Zhu B., Yu Z., Yang C. (2017b) Numerical study of pressure fluctuation in the whole flow passage of a low specific speed mixed-flow pump, Adv. Mech. Eng. 9, 1–11. [Google Scholar]
  • Zhang W.W., Yu Z.Y., Zhu B.S. (2017c) Numerical study of pressure fluctuation in a gas-liquid two-phase mixed-flow pump, Energies 10, 1–14. [Google Scholar]
  • Zhang W.W., Yu Z.Y., Li Y.J. (2018a) Analysis of flow and phase interaction characteristics in a gas-liquid two-phase pump, Oil Gas Sci. Technol. - Rev. IFP Energies nouvelles 73, 69. [CrossRef] [Google Scholar]
  • Zhang W.W., Yu Z.Y., Zahid M.N., Li Y.J. (2018b) Study of the gas distribution in a multiphase rotodynamic pump based on interphase force analysis, Energies 11, 1–16. [Google Scholar]
  • Zhang W.W., Yu Z.Y., Li Y.J. (2019) Application of a non-uniform bubble model in a multiphase rotodynamic pump, J. Pet. Sci. Eng. 173, 1316–1322. [Google Scholar]
  • Zhu J.J., Zhang H.Q. (2016) Mechanistic modeling and numerical simulation of in-situ gas void fraction inside ESP impeller, J. Nat. Gas Sci. Eng. 36, 144–154. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.