Open Access
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 72, Number 1, January–February 2017
Article Number 6
Number of page(s) 14
Published online 14 February 2017
  • Liu W.Z. (1997) Steam injection for thermal recovery of heavy oils, 1st edn., Petroleum Industry Press, Beijing. [Google Scholar]
  • Vega Riveros G.L., Barrios H. (2011) Steam injection experiences in heavy and extra-heavy oil fields, Venezuela, in Proceedings of SPE Heavy Oil Conference and Exhibition, 12-14 December, Kuwait City, Kuwait, SPE-150283-MS. [Google Scholar]
  • Wei S.L., Cheng L.S., Huang W.J., Huang S.J., Liu S. (2014) Prediction for steam chamber development and production performance in SAGD process, J. Natural Gas Sci. Eng. 19, 303–310 [CrossRef] [Google Scholar]
  • Zeng Y.Q., Liu S.Z., Wang Q., et al. (2006) Overview of heavy oil cyclic steam stimulation recovery technology, Special Oil & Gas Res. 13, 6, 5–9. [Google Scholar]
  • He C.G., Mu L.X., Xu A.Z., Sidong F. (2015) A new model of steam soaking heating radius and productivity prediction for heavy oil reservoirs, Acta Petrolei Sinica 36, 12, 1564–1570. [Google Scholar]
  • Ziegler V.M., Crookston R.B., Sanford S.J., Merrell J.M. (1993) Recommended practices for heat management of steamflood projects, in Proceedings of the SPE International Thermal Operations Symposium, SPE-25808-MS, 8-10 Feb., Bakersfield, CA, pp. 297–318. [Google Scholar]
  • Wu Z.B., Pang Z.X., Liu H.Q., Wang D., Wang C., Wang C., Ye Z., Chen Y. (2015) A visible experiment on adoption of high-temperature gel for improving the development effect of steam flooding in heavy oil reservoirs, Acta Petrolei Sinica 36, 11, 1421–1426. [Google Scholar]
  • Miura K., Wang J. (2010) An analytical model to predict cumulative steam oil ratio (CSOR) in thermal recovery SAGD process, in Canadian Unconventional Resources and International Petroleum Conference, 21 Oct., Galgary, Alberta, Canada, SPE-137604-MS. [Google Scholar]
  • Liu H.Q., Fan Y.P., Zhao D.W., et al. (2008) Principles and methods of thermal oil recovery technology, 1st edn., Chin. Univ. of Petro. Press, Dongying. [Google Scholar]
  • Gu H., Cheng L.S., Huang S.J. (2014) New algorithm for thermophysical parameters and heat loss along wellbore during steam injection, Chin. J. Comput. Phys. 31, 4, 449–454. [Google Scholar]
  • Prats M. (1969) The heat efficiency of thermal recovery process, J. Pet. Technol. 21, 323–332. [CrossRef] [Google Scholar]
  • Ramey H.J. (1962) Wellbore heat transmission, J. Pet. Technol. 14, 427–435. [Google Scholar]
  • Satter A. (1965) Heat losses during flow of steam down a wellbore, J. Pet. Technol. 17, 845–851. [Google Scholar]
  • Holst P.H., Flock D.L. (1966) Wellbore behavior during saturated steam injection, J. Can. Pet. Technol. 5, 184–193. [Google Scholar]
  • Gu H., Cheng L.S., Huang S.J., Du B.J., Hu C.H. (2014) Prediction of thermophysical properties of saturated steam and wellbore heat losses in concentric dual-tubing steam injection wells, Energy 75, 419–429. [CrossRef] [Google Scholar]
  • Gu H., Cheng L.S., Huang S.J., Li B.K., Fang W.C., Hu C.H. (2015) Steam injection for heavy oil recovery: modeling of wellbore heat efficiency and analysis of steam injection performance, Energy Convers. Manage. 97, 166–177. [CrossRef] [Google Scholar]
  • Gu H., Cheng L.S., Huang S.J. (2014) New algorithm for thermophysical parameters and heat loss along wellbore during steam injection, Chin. J. Comput. Phys. 31, 4, 449–454. [Google Scholar]
  • Aydelotte S.R., Gary A. (1983) A simplified predictive model for steamdrive performance, J. Pet. Technol. 35, 991–1002. [CrossRef] [Google Scholar]
  • Baker P.E. (1969) An experimental study of heat flow in steam flooding, Soc. Pet. Eng. J. 9, 89–99. [CrossRef] [Google Scholar]
  • Marx J.W., Langenheim R.H. (1959) Reservoir heating by hot fluid injection petroleum transactions, AIME 216, 312–315. [Google Scholar]
  • van Lookeren J. (1977) Calculation methods for linear and radial steam flow in oil reservoirs, Soc. Pet. Eng. J. 23, 1–16. [Google Scholar]
  • Doscher T.M., Ghassemi F. (1983) The influence of oil viscosity and thickness on the steam drive, J. Pet. Technol. 35, 291–298. [CrossRef] [Google Scholar]
  • Neuman C.H. (1975) A mathematical model of the steam drive process-applications, in Proceeding of SPE California Regional Meeting, 2-4 April, Ventura, California, SPE-4757-MS. [Google Scholar]
  • Vogel J.V. (1984) Simplified heat calculations for steamfloods. AIME 36, 1127–1136. [Google Scholar]
  • Carslaw H.S., Jaeger J.C. (1986) Conduction of heat in solids, 2nd edn., Oxford University Press, USA, New York. [Google Scholar]
  • Roger M.B. (1991) Thermal recovery of oil and bitumen, Prentice-Hall, Inc., USA. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.