Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 71, Number 2, March–April 2016
Article Number 29
Number of page(s) 10
DOI https://doi.org/10.2516/ogst/2014050
Published online 20 January 2015
  • Arkoudeas P., Zannikos F., Lois E. (2008) The Tribological Behavior of Essential Oils in Low Sulphur Automotive Diesel, Fuel 87, 17-18, 3648–3654. [CrossRef] [Google Scholar]
  • Baldwin R.M., Feik C.J. (2013) Bio-Oil Stabilization and Upgrading by Hot Gas Filtration, Energy Fuels 27, 6, 3224–3238. [CrossRef] [Google Scholar]
  • Xu Y.F., Yu H.Q., Wei X.Y., Cui Z., Hu X.G., Xue T., Zhang D.Y. (2013) Friction and Wear Behaviors of a Cylinder Liner-Piston Ring with Emulsified Bio-Oil as Fuel, Tribology Transactions 56, 3, 359–365. [CrossRef] [Google Scholar]
  • Elkasabi Y., Mullen C.A., Pighinelli A.L.M.T., Boateng A.A. (2014) Hydrodeoxygenation of Fast-Pyrolysis Bio-Oils from Various Feedstocks Using Carbon-Supported Catalysts, Fuel Processing Technology 123, 11–18. [CrossRef] [Google Scholar]
  • Wang C.P., Hu Y.F., Chen Q., Lv C.Y., Jia S.G. (2013) Bio-oil Upgrading by Reactive Distillation Using P-Toluene Sulfonic Acid Catalyst Loaded on Biomass Activated Carbon, Biomass Bioenergy 56, 405–411. [CrossRef] [Google Scholar]
  • Gunawan R., Li X., Lievens C., Gholizadeh M., Chaiwat W., Hu X., Mourant D., Bromly J., Li C.Z. (2013) Upgrading of Bio-Oil into Advanced Biofuels and Chemicals. Part I. Transformation of GC-detectable Light Species During the Hydrotreatment of Bio-oil Using Pd/C Catalyst, Fuel 111, 709–717. [CrossRef] [Google Scholar]
  • Duan P.G., Xu Y.P., Bai X.J. (2013) Upgrading of Crude Duckweed Bio-Oil in Subcritical Water, Energy Fuels 27, 8, 4729–4738. [CrossRef] [Google Scholar]
  • Xu Y., Zheng X., Yu H., Hu X. (2014) Hydrothermal Liquefaction of Chlorella pyrenoidosa for Bio-Oil Production over Ce/HZSM-5, Bioresource Technology 156, 1–5. [CrossRef] [PubMed] [Google Scholar]
  • Xu Y., Wang Q., Hu X., Li C., Zhu X. (2010) Characterization of the Lubricity of Bio-Oil/Diesel Fuel Blends by High Frequency Reciprocating Test Rig, Energy 35, 1, 283–287. [CrossRef] [Google Scholar]
  • Xu Y.F., Zheng X.J., Yin Y.G., Huang J., Hu X.G. (2014) Comparison and Analysis of the Influence of Test Conditions on the Tribological Properties of Emulsified Bio-Oil, Tribology Letters 55, 3, 543–552. [CrossRef] [Google Scholar]
  • Jena U., Das K.C. (2011) Comparative Evaluation of Thermochemical Liquefaction and Pyrolysis for Bio-oil Production from Microalgae, Energy Fuels 25, 11, 5472–5482. [CrossRef] [Google Scholar]
  • Hu Z.Q., Zheng Y., Yan F., Xiao B., Liu S.M. (2013) Bio-Oil Production through Pyrolysis of Blue-Green Algae Blooms (Bgab): Product Distribution and Bio-Oil Characterization, Energy 52, 119–125. [CrossRef] [Google Scholar]
  • Wang K.G., Brown R.C., Homsy S., Martinez L., Sidhu S.S. (2013) Fast Pyrolysis of Microalgae Remnants in a Fluidized Bed Reactor for Bio-Oil and Biochar Production, Bioresource Technology 127, 494–499. [CrossRef] [PubMed] [Google Scholar]
  • Jena U., Das K.C., Kastner J.R. (2011) Effect of Operating Conditions of Thermochemical Liquefaction on Biocrude Production from Spirulina Platensis, Bioresource Technology 102, 10, 6221–6229. [CrossRef] [PubMed] [Google Scholar]
  • Shum P.W., Xu Y.F., Zhou Z.F., Cheng W.L., Li K.Y. (2012) Study of TiAlSiN Coatings Post-treated with N and C+N Ion Implantations. Part 2: The Tribological Analysis, Wear 274-275, 274–280. [CrossRef] [Google Scholar]
  • Xu Y., Yu H., Hu X., Wei X., Cui Z. (2014) Bio-Oil Production from Algae via Thermochemical Catalytic Liquefaction, Energy Sources, Part A 36, 1, 1–8. [CrossRef] [Google Scholar]
  • Xu Y., Hu X., Yu H., Hu L. (2014) Study of Lubrication Performance and Mechanism of Bio-oils Made from Typical Microalgae, Tribology 34, 3, 291–296 (in Chinese). [Google Scholar]
  • Bera A., Kumar T., Ojha K., Mandal A. (2013) Adsorption of Surfactants on Sand Surface in Enhanced Oil Recovery: Isotherms, Kinetics and Thermodynamic Studies, Applied Surface Science 284, 87–99. [CrossRef] [Google Scholar]
  • Huang W., Du C., Li Z., Liu M., Liu W. (2006) Tribological Characteristics of Magnesium Alloy Using N-Containing Compounds as Lubricating Additives During Sliding, Wear 260, 1-2, 140–148. [CrossRef] [Google Scholar]
  • Grahn M., Naveira-Suarez A., Pasaribu R. (2011) Effect of ZDDP on Friction in Fretting Contacts, Wear 273, 1, 70–74. [CrossRef] [Google Scholar]
  • Hu E., Hu X., Liu T., Song R., Dearn K.D., Xu H. (2013) Effect of TiF3 Catalyst on the Tribological Properties of Carbon Black-Contaminated Engine Oils, Wear 305, 1-2, 166–176. [CrossRef] [Google Scholar]
  • Kasai P., Raman V. (2006) Hydrogen Bonding in Lubricants for Hard Disk Drives, Tribology Letters 21, 3, 205–216. [CrossRef] [Google Scholar]
  • Xu Y., Zheng X., Hu X., Dearn K.D., Xu H. (2014) Effect of Catalytic Esterification on the Friction and Wear Performance of Bio-Oil, Wear 311, 1-2, 93–100. [CrossRef] [Google Scholar]
  • Xu Y., Hu X., Yuan K., Zhu G., Wang W. (2014) Friction and Wear Behaviors of Catalytic Methylesterified Bio-oil, Tribology International 71, 168–174. [CrossRef] [Google Scholar]
  • Grün F., Sailer W., Gódor I. (2012) Visualization of the Processes Taking Place in the Contact Zone with in-situ Tribometry, Tribology International 48, 44–53. [CrossRef] [Google Scholar]
  • Xu Y., Zheng X., Hu X., Yin Y., Lei T. (2014) Preparation of the Electroless Ni–P and Ni–Cu–P Coatings on Engine Cylinder and Their Tribological Behaviors Under Bio-Oil Lubricated Conditions, Surface and Coatings Technology 258, 790–796. [CrossRef] [Google Scholar]
  • Hu K., Hu X., Wang J., Xu Y., Han C. (2012) Tribological Properties of MoS2 with Different Morphologies in High-Density Polyethylene, Tribology Letters 47, 1, 79–90. [CrossRef] [Google Scholar]
  • Hu K., Hu X., Xu Y., Huang F., Liu J. (2010) The Effect of Morphology on the Tribological Properties of MoS2 in Liquid Paraffin, Tribology Letters 40, 1, 155–165. [CrossRef] [Google Scholar]
  • Kim W., Kang H.J., Noh S.K., Song J., Kim C.S. (2007) Magnetic and Structural Properties of Fe Ion-Implanted GaN, J. Magnetism Magnetic Materials 316, 2, e199–e202. [CrossRef] [Google Scholar]
  • Schindler M., Hawthorne F.C., Freund M.S., Burns P.C. (2009) XPS Spectra of Uranyl Minerals and Synthetic Uranyl Compounds. II: the O1s Spectrum, Geochimica Cosmochimica Acta 73, 9, 2488–2509. [CrossRef] [Google Scholar]
  • Schilling T., Bron M. (2008) Oxygen Reduction at Fe–N-Modified Multi-Walled Carbon Nanotubes in Acidic Electrolyte, Electrochimica Acta 53, 16, 5379–5385. [CrossRef] [Google Scholar]
  • Alves S.M., Barros B.S., Trajano M.F., Ribeiro K.S.B., Moura E. (2013) Tribological Behavior of Vegetable Oil-Based Lubricants with Nanoparticles of Oxides in Boundary Lubrication Conditions, Tribology International 65, 28–36. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.