Dossier: Fluids-Polymers Interactions: Permeability, Durability
Open Access
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 70, Number 2, March–April 2015
Dossier: Fluids-Polymers Interactions: Permeability, Durability
Page(s) 279 - 289
Published online 23 June 2014
  • Verdu J. (2012) Oxidative ageing of polymers, Wiley. [CrossRef]
  • Weitsman Y. (2012) Fluid Effects in Polymers and Polymeric Composites, Springer. [CrossRef]
  • Martin R. (2008) Aging of Composites, Woodhead Publishing.
  • Merdas I., Thominette F., Tcharkhtchi A., Verdu J. (2002) Factors governing water absorption by composite matrices, Composites Science and Technology 62,4, 487–492. [CrossRef]
  • El Yagoubi J., Lubineau G., Roger F., Verdu J. (2012) A fully coupled diffusion-reaction scheme for moisture sorption–desorption in an anhydride-cured epoxy resin, Polymer 53, 24, 5582–5595. [CrossRef]
  • Hoppe L.F.E. (2003) Designing SPM hawsers to today’s requirements, OCEANS 2003 Proceedings, San Diego, CA, 22-26 Sept., 3, 1353–1359.
  • Del Vecchio C.J.M. (1992) Light weight materials for deep water moorings, University of Reading.
  • Torben S. (2007) Fiber Rope Deployment System for Ultra Deep Water Installations, 2007 Offshore Technology Conference, Houston, Texas, OTC, 30 April-3 May, OTC 18932.
  • Davies P., Reaud Y., Dussud L., Woerther P. (2011) Mechanical behaviour of HMPE and aramid fibre ropes for deep sea handling operations, Ocean Engineering 38, 17-18, 2208–2214. [CrossRef]
  • François M., Davis P., Grosjean F., Legerstee F. (2010) Modelling fiber rope load-elongation properties - Polyester and other fibers, 2010 Offshore Technology Conference, Houston, Texas, 3-6 May, OTC 20468.
  • Richards A.F. (2005) Nylon fibres, in Synthetic fibres, McIntyre J. (ed),Woodhead Publishing.
  • Derombise G. (2009) Comportement à long terme des fibres aramides en milieu neutres et alcalins, École Nationale des Ponts et Chaussées, Paris.
  • Derombise G., Vouyovitch Van Schoors L., Davies P. (2009) Degradation of Technora aramid fibres in alkaline and neutral environments, Polymer Degradation and Stability 94,10, 1615–1620. [CrossRef]
  • Derombise G., Chailleux E., Forest B., Riou L., Lacotte N., Van Schoors L.V., Davies P. (2011) Long-term mechanical behavior of aramid fibers in seawater, Polymer Engineering and Science 51, 7, 1366–1375. [CrossRef]
  • Derombise G., van Schoors L.V., Bourmaud A., Davies P. (2012) Morphological and physical evolutions of aramid fibers aged in a moderately alkaline environment, Journal of Applied Polymer Science 123, 5, 3098–3105. [CrossRef]
  • Radcliffe S. (1972) Effects of hydrostatic pressure on the deformation and fracture of polymers, in Deformation and Fracture of High polymers, in Deformation and Fracture of High polymers, Plenum Press.
  • Pae K.D., Bhateja S.K. (1975) The Effects of Hydrostatic Pressure on the Mechanical Behavior of Polymers, Journal of Macromolecular Science, Part C 13, 1, 1–75. [CrossRef]
  • Fried N. (1967) Degradation of composite materials, Proceedings of the Fifth Symposium on Naval Structural Mechanics, May, pp.813–837
  • ASTM STP 1302 (1997) Aging of composites in water, pp. 73–96.
  • Tucker W.C., Lee S.-B., Rockett T. (1993) The Effects of Pressure on Water Transport in Polymers, Journal of Composite Materials 27, 8, 756–763. [CrossRef]
  • Tucker W.C., Brown R. (1989) Moisture Absorption of Graphite/Polymer Composites Under 2000 Feet of Seawater, Journal of Composite Materials 23, 8, 787–797. [CrossRef]
  • Pollard A., Baggott R., Wostenholm G.H., Yates B., George A.P. (1989) Influence of hydrostatic pressure on the moisture absorption of glass fibre-reinforced polyester, Journal of Materials Science 24, 5, 1665–1669. [CrossRef]
  • Bradley W.L., Chiou P.-L.B., Grant T.S. (1993) The effect of seawater on polymeric composite materials, Proceedings of the First International Workshop, Houston, Texas, 26-28 Oct, in Composite Materials for Offshore Operations, Wang S.S., Fitting D.W. (eds), NIST Special Publication, 887, 193–202.
  • Avena A., Bunsell A.R. (1988) Effect of hydrostatic pressure on the water absorption of glass fibre-reinforced epoxy resin, Composite 19, 5, 355–357. [CrossRef]
  • Davies P., Choqueuse D., Mazéas F. (1997) Composites Underwater, Proc Duracosys, 3rd International Conference Duracosys, Blacksburg, Virginia, 14-17 Sept.
  • Harper B.D., Staab G.H., Chen R.S. (1987) A Note on the Effects of Voids Upon the Hygral and Mechanical Properties of AS4/3502 Graphite/Epoxy, Journal of Composite Materials 21, 3, 280–289. [CrossRef]
  • Le Gac P.-Y., Choqueuse D., Paris M., Recher G., Zimmer C., Melot D. (2013) Durability of polydicyclopentadiene under high temperature, high pressure and seawater (offshore oil production conditions), Polymer Degradation and Stability 98, 3, 809–817. [CrossRef]
  • Lefebvre X., Sauvant-Moynot V., Choqueuse D., Chauchot P. (2009) Durability of Syntactic Foams for Deep Offshore Insulation: Modelling of Water Uptake under Representative Ageing Conditions in Order to Predict the Evolution of Buoyancy and Thermal Conductivity, Oil & Gas Science and Technology - Revue IFP 64, 2, 165–178. [CrossRef] [EDP Sciences]
  • Choqueuse D. (2012) Experimental study and analysis of the mechanical behaviour of syntactic foams used in deep sea, PhD Thesis, Université de Franche-Comté.
  • Frisch H.L. (1970) Diffusion in polymers, Crank J., Park G.S. (eds), Academic Press, London and New York, 1968; 452 pg, Journal of Applied Polymer Science 14, 6, 1657-1657.
  • Park G.S. (1986) Polymer permeability, Comyn J. (ed.), Elsevier Applied Science Publishers, London, 1985, vii+383, ISBN 0-85334-322-5, British Polymer Journal. 18, 3, 209-210, DOI: 10.1002/pi.4980180315.
  • Xiao G.Z., Shanahan M.E.R. (1997) Water absorption and desorption in an epoxy resin with degradation, Journal of Polymer Science Part B-Polymer Physics 35, 16, 2659–2670. [CrossRef]
  • Gaudichet-Maurin E., Thominette F., Verdu J. (2008) Water sorption characteristics in moderately hydrophilic polymers, Part 1: Effect of polar groups concentration and temperature in water sorption in aromatic polysulfones, Journal of Applied Polymer Science 109, 5, 3279–3285. [CrossRef]
  • Xiao G.Z., Shanahan M.E.R. (1998) Irreversible effects of hygrothermal aging on DGEBA/DDA epoxy resin, Journal of Applied Polymer Science 69, 2, 363–369. [CrossRef]
  • Le Gac P.Y., Le Saux V., Paris M., Marco Y. (2012) Ageing mechanism and mechanical degradation behaviour of polychloroprene rubber in a marine environment: Comparison of accelerated ageing and long term exposure, Polymer Degradation and Stability 97, 3, 288–296. [CrossRef]
  • Jacques B., Werth M., Merdas I., Thominette F., Verdu J. (2002) Hydrolytic ageing of polyamide 11. 1. Hydrolysis kinetics in water, Polymer 43, 24, 6439–6447. [CrossRef]
  • Matuszak M.L., Frisch K.C., Reegen S.L. (1973) Hydrolysis of linear polyurethanes and model monocarbamates, Journal of Polymer Science: Polymer Chemistry Edition 11, 7, 1683–1690. [CrossRef]
  • Chapman T.M. (1989) Models for polyurethane hydrolysis under moderately acidic conditions: A comparative study of hydrolysis rates of urethanes, ureas, and amides, Journal of Polymer Science Part A: Polymer Chemistry 27, 6, 1993–2005. [CrossRef]
  • Celina M., Wise J., Ottesen D.K., Gillen K.T., Clough R.L. (1998) Oxidation profiles of thermally aged nitrile rubber, Polymer Degradation and Stability 60, 2–3, 493–504. [CrossRef]
  • Celina M., Wise J., Ottesen D.K., Gillen K.T., Clough R.L. (2000) Correlation of chemical and mechanical property changes during oxidative degradation of neoprene, Polymer Degradation and Stability 68, 2, 171–184. [CrossRef]
  • Le Saux V., Le Gac P.Y., Marco Y., Calloch S.. (2014) Limits in the validity of Arrhenius predictions for field ageing of a silica filled polychloroprene in a marine environment, Polymer Degradation and Stability, 99, 254–261. [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.