IFP Energies nouvelles International Conference: E-COSM’12 – IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling
Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 70, Number 1, January–February 2015
IFP Energies nouvelles International Conference: E-COSM’12 – IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling
Page(s) 15 - 30
DOI https://doi.org/10.2516/ogst/2014002
Published online 11 June 2014
  • Carrabine E., Longhurst B. (2002) Consuming the car: anticipation, use and meaning in contemporary youth culture, The Sociological Review 50, 2, 181–196. [CrossRef]
  • Urry J. (2000) Sociology beyond societies: Mobilities for the twenty first century, Routledge.
  • EC (2011) Energy, transport and environment indicators, Publications Office of the European Union.
  • Santos A., McGuckin N., Nakamoto HY., Gray D., Liss S. (2011) Summary of travel trends: 2009 National Household Travel Survey, US Department of Transportation. Federal Highway Administration.
  • Dargay J., Gately D. (1999) Income’s effect on car and vehicle ownership, worldwide: 1960–2015, Transportation Research Part A: Policy and Practice 33, 2, 101–138. [CrossRef]
  • OPEC. (2011) World Oil Outlook, OPEC Secretariat.
  • Johnson TV. (2010) Review of CO2 emissions and technologies in the road transportation sector, SAE paper 2010-01-1276.
  • IEA (2009) Energy balances of non-OECD countries, OECD International Energy Agency.
  • IEO (2011) International Energy Outlook 2011, US Energy Information Administration.
  • IEA (2010) Energy Technology Perspectives, OECD International Energy Agency.
  • IPCC (2001) The Science of Climate Change, Joint national science academies’ statement.
  • Hansen J., Ruedy R., Sato M., Lo K. (2004) Global surface temperature change, Reviews of Geophysics 48, RG4004.
  • EC (2011) A Roadmap for moving to a competitive low carbon economy in 2050. Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions.
  • Adams M, Lükewille A. (2010) The European Environment State and Outlook 2010: Air pollution, European Environment Agency, Publications Office of the European Union.
  • EU (2009) Regulation (EC) No 443/2009 of the European Parliament and of the Council of 23 April 2009 setting emission performance standards for new passenger cars as part of the Community’s integrated approach to reduce CO2 emissions from light-duty vehicles, Official Journal of the European Union.
  • Mock P. (2012) European CO2 emission performance standards for passenger cars and light commercial vehicles, Technical report, The International Council on Clean Transportation.
  • Galindo J., Climent H., Guardiola C., Tiseira A., Portalier J. (2009) Assessment of a sequentially turbocharged Diesel engine on real-life driving cycles, International Journal of Vehicle Design 49, 1-3, 214–234. [CrossRef]
  • Rubino L., Bonnel P., Hummel R., Krasenbrink A., Manfredi U., De Santi G. (2008) On-road emissions and fuel economy of light duty vehicles using pems Chase-testing experimente, SAE Paper 2008-01-1824.
  • Mock P., German J., Bandivadekar A., Riemersma I. (2012) Discrepancies between type-approval and real-world fuel consumption and CO2 values in 2001-2011 European passenger cars, Technical report, The International Council on Clean Transportation.
  • ECE (2009) Proposal to develop a new global technical regulation on worldwide harmonized light vehicle test procedures. United Nations. Economic commission for Europe. Inland Transport Committee. World Forum for Harmonization of Vehicle Regulations. Executive Committee (AC3) of the 1998 Global Agreement, ece/trans/wp29/ac3/26 edition.
  • Daham B., Li H., Andrews GE., Ropkins K., Tate JE., Bell MC. (2009) Comparison of real world emissions in urban driving for euro 1-4 vehicles using a PEMS, SAE Paper 2009-010941.
  • Desantes J.M., Galindo J., Guardiola C., Dolz V. (2010) Air mass flow estimation in turbocharged Diesel engines from in-cylinder pressure measurement, Experimental Thermal and Fluid Science 341, 37–47. [CrossRef]
  • Lamping M., Körfer T., Schnorbus T., Pischinger S., Chen Y. (2008) Tomorrows Diesel fuel diversity -challenges and solutions, SAE Paper 2008-01-1731.
  • Luján J.M., Bermúdez V., Tormos B., Pla B. (2009) Comparative analysis of a DI Diesel engine fuelled with biodiesel blends during the european MVEG-a cycle: Performance and emissions (ii), Biomass and Bioenergy 33, 6-7, 948–956. [CrossRef]
  • Mock P. (2012) European vehicle market statistics: Pocketbook 2012, Technical report, The International Council on Clean Transportation.
  • EPA (2011) Light-duty automotive technology, carbon dioxide emissions, and fuel economy trends: 1975 through 2011, EPA420-R-12-001a. Transportation and Climate Division. Office of Transportation and Air Quality. US Environmental Protection Agency.
  • ACEA (2011) ACEA position paper on electrically chargeable vehicles, European Automobile Manufacturers’ Association.
  • Mock P. (2012) EU vehicle technology study: Development of preliminary cost curves for the EU market, 27 April 2012 workshop for regulators, manufacturers, and others working on these issues in the EU in the 2020-25 time frame. GHG reduction potential and costs of LDV technologies, II, The International Council on Clean Transportation.
  • Posada F., Bandivadekar A., German J. (2012) Estimated cost of emission reduction technologies for LDVs, Technical report, The International Council on Clean Transportation.
  • Meszler D., German J., Mock P., Bandivadekar A. (2013) Summary of mass reduction impacts on EU cost curves, Technical report, The International Council on Clean Transportation.
  • Brooker AD., Ward J., Wang L. (2013) Lightweighting impacts on fuel economy, cost, and component losses, SAE paper 2013-01-0381.
  • Johnson TV. (2012) Vehicular emissions in review, SAE Int. J. Engines 5, 2, 2012-01-0368.
  • Lejeune M (2012) Every drop counts: Most promising research paths to exceed 50% efficiency with HD Diesel engines, Thiesel Conference, Valencia, Spain, 11-14 Sept.
  • De Marco C., Mattarelli E., Paltrinieri F., Rinaldini C. (2007) A new combustion system for 2-stroke HSDI Diesel engines, SAE paper 2007-01-1255.
  • Schmidt S., Eichlseder H., Kirchberger R., Nimmervoll P. (2004) GDI with high-performance 2-stroke application: Concepts, experiences and potential for the future, SAE paper 2004-320043.
  • Husted HL., Piock W., Ramsay G. (2009) Fuel efficiency improvements from lean, stratified combustion with a solenoid injector, SAE Paper 2009-01-1485.
  • Xingcai Lu., Han Dong., Huang Zhen. (2011) Fuel design and management for the control of advanced compression-ignition combustion modes, Progress in Energy and Combustion Science 37, 6, 741–783. [CrossRef]
  • Chiang C.J., Stefanopoulou A.G. (2007) Stability analysis in homogeneous charge compression ignition (HCCI) engines with high dilution, IEEE Trans. Control Syst. Technol. 15, 209–219. [CrossRef]
  • Kokjohn S.L., Hanson R.M., Splitter D.A., Reitz R.D. (2011) Fuel reactivity controlled compression ignition (RCCI): a pathway to controlled high-efficiency clean combustion, International Journal of Engine Research 12, 3, 209–226. [CrossRef]
  • Payri R., Garcia A., Domenech V., Durrett R., Plazas Torres A. (2012) Hydraulic behavior and spray characteristics of a common rail diesel injection system using gasoline fuel, SAE paper, 201201-0458.
  • Varnier O. (2012) Trends and limits of two-stage boosting systems for automotive diesel engines, Universitat Politècnica de València. Departamento de Máquinas y Motores Térmicos.
  • Galindo J., Climent H., Guardiola C., Doménech J. (2009) Strategies for improving the mode transition in a sequential parallel turbocharged automotive Diesel engine, International Journal of Automotive Technology 10, 2, 141–149. [CrossRef]
  • Baert R.S.G., Beckman D.E., Veen A. (1999) Efficient EGR technology for future HD Diesel engine emission targets, SAE paper 1999-01-0837.
  • Moroz S., Bourgoin G., Luján J.M., Pla B. (2008) A 2.0 litre Diesel engine with low pressure exhaust gas recirculation and advanced cooling system, The Diesel Engine Conference, Proceedings of the SIA 2008 Conference, Rouen, France, 28, 29 May.
  • Walker A.P. (2004) Controlling particulate emissions from Diesel vehicles, Topics in Catalysis 28, 165–170. [CrossRef]
  • Krüger U., Edwards S., Pantow E., Lutz R., Dreisbach R., Glensvig M. (2008) High performance cooling and EGR systems as a contribution to meeting future emission standards, SAE paper 2008-01-1199.
  • Palma A., Del Core D., Esposito C. (2011) The HCCI concept and control, performed with multiair technology on gasoline engines, SAE paper 2011-24-0026.
  • Baccile A., Ceccarini D., Cheng L., Iacoponi A., Lake T., Noble A., Stokes J. (2007) An innovative control system for a 2/4 stroke switchable engine, SAE paper 2007-01-1199.
  • Nakagawa S., Hori T., Nagano M. (2004) A new feedback control of a lean NOx trap catalyst, SAE paper 2004-01-0527.
  • Roberts C. (2011) The pursuit of high efficiency engines-SWRI programs, Emissions 2011 Conference, Ann Arbor, MI.
  • Ostrowski G., Neely GD., Chadwell CJ., Mehta D., Wetzel P. (2012) Downspeeding and supercharging a Diesel passenger car for increased fuel economy, SAE Paper 2012-01-0704.
  • Pace L., Presti M. (2011) An alternative way to reduce fuel consumption during cold start: The electrically heated catalyst, SAE paper 2011-24-0178.
  • Brands M.C., Werner J., Hoehne J.L. (1981) Vehicle testing of cummis turbocompound Diesel engine, SAE paper 810073.
  • Hountalas D.T., Katsanos C.O., Kouremenos D.A., Rogdakis E.D. (2007) Study of available exhaust gas heat recovery technologies for HD Diesel engine applications, International Journal of Alternative Propulsion 1, 228–249. [CrossRef]
  • Hopmann U. (2004) Diesel engine waste heat recovery utilizing electric turbocompound technology, 2004 Diesel Engine-Efficiency and Emissions Research (DEER) Conference, Coronado, California, 29 Aug.-2 Sept.
  • Weerasinghea W.M.S.R., Stobarta R.K., Hounshama S.M. (2010) Thermal efficiency improvement in high output diesel engines a comparison of a rankine cycle with turbo-compounding, Applied Thermal Engineering 30, 2253–2256. [CrossRef]
  • Bass J.C., Kushch A.S., Elsner N.B. (2001) Thermoelectric generator (TEG) on heavy Diesel trucks, Technical report, Hi-Z Technology Inc.
  • Kushch A.S., Bass J.C., Ghamaty S., Elsner N.B. (2002) Thermoelectric development at HI-Z technology, 2002 Diesel Engine-Efficiency and Emissions Research (DEER) Conference, San Diego, California, 25-29 Aug.
  • Boretti A. (2012) Improving the efficiency of turbocharged spark ignition engines for passenger cars through waste heat recovery, SAE Paper 2012-01-0388.
  • Aly S.E. (1988) Diesel engine waste-heat power cycle, Applied Energy 29, 179–189. [CrossRef]
  • Bailey M.M. (1985) Comparative evaluation of three alternative power cycles for waste heat recovery form the exhaust of adiabatic Diesel engines, Technical report, National Aeronautics and Space Administration.
  • Dolz V., Novella R., García A., Sánchez J. (2012) HD Diesel engine equipped with a bottoming rankine cycle as a waste heat recovery system. part 1: Study and analysis of the waste heat energy, Applied Thermal Engineering 36, 269–278. [CrossRef]
  • Doyle E., Dinanno L., Kramer S. (1979) Installation of a Diesel organic-rankine compound engine in a class 8 truck for a single-vehicle test, SAE paper 790646.
  • Ferrari A., Chiodi M., Bargende M,, Roberti P., Millo F., Wichel-Rans D. (2011) Virtual set-up of a racing engine for the optimization of lap performance through a comprehensive engine-vehicle-driver model, SAE paper 2011-24-0141.
  • Tunestal P., Lewander M. (2010) Model predictive control of partially premixed combustion, Lecture Notes in Control and Information Sciences 402, 171–181. [CrossRef]
  • Huang Y., Mehta D. (2005) Investigation of an in-cylinder ion sensing assisted HCCI control strategy, SAE paper 2005-010068.
  • Leonhardt S., Müller N., Isermann R. (1999) Methods for engine supervision and control based on cylinder pressure information, IEEE/ASME Transactions on Mechatronics 4, 3, 235–245. [CrossRef]
  • Muller R., Hart M., Truscott A., Noble A., Krotz G., Eickhoff M., Cavalloni C., Gnielka M. (2000) Combustion pressure based engine management system, SAE Paper 2000-01-0928.
  • Worm J.J. (2005) An evaluation of several methods for calculating transient trapped air mass with emphasis on the “delta p” approach, SAE Paper 2005-01-0990.
  • Dorenkamp R. (2008) U.S light duty clean diesel -Volkswagen and Audi met the technical challenge together. 2008 Diesel Engine-Efficiency and Emissions Research (DEER) Conference, Dearborn, Michigan, 4-7 Aug.
  • Nelson CS. (2011) Particulate matter sensor, US patent 8225648.
  • Asad U., Divekar P., Chen X., Zheng M. (2012) Mode switching control for Diesel low temperature combustion with fast feedback algorithms, SAE Int. J. Engines 5, 3, 850–863.
  • Milovanovic N., Blundell D., Gedge S., Turner J. (2005) SI-HCCISI mode transition at different engine operating conditions, SAE paper 2005-01-0156.
  • Steffen T., Stobart R., Yang Z. (2012) Challenges and potential of intra-cycle combustion control for direct injection Diesel engines, SAE paper 2012-01-1158.
  • Continental (2011) Fuel quality sensor helps to protect the engine and the environment, Continental, press release.
  • Vanzuilen D., Mouaici G., Bernard F., McKenzie I. (2007) US patent 7170303.
  • Stefanopoulou A.G., Kolmanovsky I., Freudenberg J.S. (2000) Control of variable geometry turbocharged Diesel engines for reduced emissions, IEEE Transactions on Control Systems Technology 8, 4, 733–745. [CrossRef] [MathSciNet]
  • Adolph D., Schnorbus T., Körfer T., Hild O. (2009) Complex air path management systems and necessary controller structures for future high dynamic requirements, SAE paper 2009-01-1616.
  • Alfieri E., Amstutz A., Guzzella L. (2009) Gain-scheduled model-based feedback control of the air/fuel ratio in Diesel engines, Control Engineering Practice 17, 12, 1417–1425. [CrossRef]
  • Arrègle J., López J.J., Guardiola C., Monin C. (2010) On board NOx prediction in Diesel engines: A physical approach, Lecture Notes in Control and Information Sciences 402, 25–36. [CrossRef]
  • Quérel C., Grondin O., Letellier C. (2012) State of the art and analysis of control oriented NOx models, SAE paper 201201-0723.
  • Zhan R., Huang Y., Khair M. (2006) Methodologies to control DPF uncontrolled regenerations, SAE paper 2006-01-1090.
  • Hsieh M., Canova M., Wang J. (2009) Model predictive control approach for afr control during lean NOx trap regeneration, SAE Int. J. Engines 2, 1, 149–157.
  • Willems F., Cloudt R., van den Eijnden E., van Genderen M., Verbeek R., de Jager B., Boomsma W., van den Heuvel I. (2012) Is closed-loop SCR control required to meet future emission targets? SAE paper 2007-01-1574.
  • Moos R. (2005) A brief overview on automotive exhaust gas sensors based on electroceramics, International Journal of Applied Ceramic Technology 2, 5, 401–413. [CrossRef]
  • Riegel J., Neumann H., Wiedenmann H.-M. (2002) Exhaust gas sensors for automotive emission control, Solid State Ionics 152-153, 783–800. [CrossRef]
  • Chi J., DaCosta H. (2005) Modeling and control of a urea-SCR aftertreatment system, SAE paper 2005-01-0966.
  • Devarakonda M., Parker G., Johnson J., Strots V. (2009) Model-based estimation and control system development in a urea-SCR aftertreatment system, SAE Int. J. Fuels Lubr. 1, 1, 646–661.
  • Xie H., Stobart R., Tunestal P., Eriksson L., Huangand Y., Leteinturier P. (2011) Future engine control enabling environment friendly vehicle, SAE paper 2011-01-0697.
  • Butts K., Jaikamal V. (2012) Model-based verification and validation of electronic engine controls, SAE paper 2012-01-0961.
  • Guardiola C., Gil A., Pla B., Piqueras P. (2012) Representation limits of mean value engine models, Lecture Notes in Control and Information Sciences 418, 185–206. [CrossRef]
  • Potter MA. (2012) The road to math: The general motors approach to an efficient diesel engine technology development, Thiesel Conference, Valencia, Spain, 11-14 Sept.
  • Vitale G., Siebenbrunner P., Hülser H., Bachler J., Pfahl U. (2007) Obd algorithms: Model-based development and calibration, SAE Paper 2007-01-4222.
  • Alamir M., Murilo A., Amari R., Tona P., Fürhapter R., Ortner P. (2010) On the use of parameterized NMPC in real-time automotive control, Lecture Notes in Control and Information Sciences 402, 139–149. [CrossRef]
  • Di Cairano S., Yanakiev D., Bemporad A., Kolmanovsky I., Hrovat D. (2010) Model predictive powertrain control: An application to IDLE speed regulation, Lecture Notes in Control and Information Sciences 402, 183–194. [CrossRef]
  • Lee T., Filipi Z. (2010) Nonlinear model predictive control of advanced engines using discretized nonlinear control oriented models, SAE paper 2010-01-2216.
  • Stewart G., Borrelli F., Pekar J., Germann D., Pachner D., Kihas D. (2010) Toward a systematic design for turbocharged engine control, Lecture Notes in Control and Information Sciences 402, 211–230. [CrossRef]
  • Del Re L., Ortner P., Alberer D. (2010) Chances and challenges in automotive predictive control, Lecture Notes in Control and Information Sciences 402, 1–22. [CrossRef]
  • Guardiola C., Pla B., Blanco-Rodriguez D., Eriksson L. (2013) A computationally efficient kalman filter based estimator for updating look-up tables applied to NOx estimation in Diesel engines, Control Engineering Practice 21, 11, 1455–1468. [CrossRef]
  • Alsabaan M., Naik K., Khalifa T., Nayak A. (2012) Optimization of fuel cost and emissions with vehicular networks at traffic intersections, 15th international IEEE conference on Intelligent Transportation System (ITSC), Anchorage, AK, 16-19 Sept., pp. 613–619.
  • Iglesias I., Isasi L., Larburu M., Martin A., Peña A. (2009) Networked clean vehicles, how the environment information will improve fuel efficiency and CO2 emissions, SAE Int. J. Fuels Lubr. 2, 1, 167–171.
  • Guardiola C., Pla B., Blanco-Rodriguez D., Reig A. (2014) Modelling driving behaviour and its impact on the energy management problem in hybrid electric vehicles, International Journal of Computer Mathematics. 91, 1, 147–156. [CrossRef]
  • Kamalanathsharma R.K., Rakha H. (2012) Agent-based modeling of eco-cooperative adaptive cruise control systems in the vicinity of intersections, 15th International IEEE Conference on Intelligent Transportation Systems (ITSC 2012), Anchorage, AK, 16-19 Sept.
  • Lang D., Stanger T., Del Re L. (2013) Opportunities on fuel economy utilizing V2V based drive systems, SAE paper 2013-01-0985.
  • Malikopoulos A.A., Aguilar J.P. (2012) Optimization of driving styles for fuel economy improvement, 15th International IEEE Conference on Intelligent Transportation Systems (ITSC 2012), Anchorage, AK, 16-19 Sept., pp. 194–199.
  • Hellström E., Ivarsson M., Aslund J., Nielsen L. (2009) Look-ahead control for heavy trucks to minimize trip time and fuel consumption, Control Engineering Practice 17, 2, 245–254. [CrossRef]
  • Kato S., Tsugawa S., Tokuda K., Matsui T., Fujii H. (2002) Vehicle control algorithms for cooperative driving with automated vehicles and intervehicle communications, IEEE Transactions on Intelligent Transportation Systems 3, 3, 155–160. [CrossRef]
  • Mitra D., Mazumdar A. (2007) Pollution control by reduction of drag on cars and buses through platooning, International Journal of Environment and Pollution 30, 1, 90–96. [CrossRef]
  • Swaroop D., Hedrick J.K. (1999) Constant spacing strategies for platooning in automated highway systems, Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME 121, 3, 462–470. [CrossRef]
  • Tsugawa S. (2013) An overview on an automated truck platoon within the energy ITS project, Adv. Automotive Control 7, 41–46.
  • Pla B., Waschl H., del Re L., Guardiola C. (2013) Fuel and immission potential of context aware engine control, SAE paper 2013-01-0306.
  • Rizzoni G., Guzzella L., Baumann BM. (1999) Unified modeling of hybrid electric vehicle drivetrains, IEEE/ASME Transactions on Mechatronics 4, 3, 246–257. [CrossRef]
  • Lindenkamp N., Stöber-Schmidt C., Eilts P. (2009) Strategies for reducing NOx and particulate matter emissions in Diesel hybrid electric vehicles, SAE Paper 2009-01-1305.

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.