Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 67, Number 5, September-October 2012
Page(s) 743 - 752
DOI https://doi.org/10.2516/ogst/2012032
Published online 14 November 2012
  • De Boever E., Varloteaux C., Nader F.H., Foubert A., Békri S., Youssef S., Rosenberg E. (2012) Quantification and Prediction of the 3D Pore Network Evolution in Carbonate Reservoir Rocks, Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles 67, 1, 161-178. [CrossRef] [EDP Sciences]
  • Bonilla R.R.O. (2004) Numerical simulation of undrained granular media, PhD Thesis, University of Waterloo.
  • Bryant S., Blunt M. (1992) Prediction of relative permeability in simple porous media, Phys. Rev. A 46, 4, 2004-2011. [CrossRef] [PubMed]
  • Carman P.C. (1956) Flow of gases through porous media, Butterworths Scientific Publications, London.
  • Carrier W.D. (2003) Goodbye, Hazen; Hello, Kozeny-Carman, J. Geotech. Geoenviron. Eng. 129, 11, 1054-1056. [CrossRef]
  • Catalano E., Chareyre B., Cortis A., Barthélemy E. (2011) A Pore- Scale Hydro-Mechanical Coupled Model for Geomaterials, II International Conference on Particle-Based Methods (Particles 2011), Barcelona, Spain, 26-28 Oct.
  • Chareyre B., Briancon L., Villard P. (2002) Theoretical versus experimental modeling of the anchorage capacity of geotextiles in trenches, Geosynth. Int. 9, 2, 97-123.
  • Chareyre B., Cortis A., Catalano E., Barthélemy E. (2012) Pore- Scale Modeling of Viscous Flow and Induced Forces in Dense Sphere Packings, Transport Porous Med. 92, 2, 473-493. [CrossRef]
  • Cundall P.A., Strack O.D.L. (1979) A discrete numerical model for granular assemblies, Geotechnique 29, 47-65. [CrossRef]
  • DiRenzo A., DiMaio F.P. (2004) Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes, Chem. Eng. Sci. 59, 3, 525-541. [NASA ADS] [CrossRef] [MathSciNet] [PubMed]
  • Glowinski R., Pan T.W., Hesla T.I., Joseph D.D., Periaux J. (2001) A fictious domain approach to the direct numerical simulation of incompressible viscous flow past moving rigid bodie, J. Comput. Phys. 169, 2, 363-426. [NASA ADS] [CrossRef] [MathSciNet] [PubMed]
  • Gueguen Y., Bouteca M. (1999) Mechanical Properties of Rocks : Pore Pressure and Scale Effects, Oil Gas Sci. Technol. – Rev. IFP 54, 6, 703-714. [CrossRef] [EDP Sciences]
  • Hakuno M. (1995) Simulation of the dynamic liquefaction of sand, in Earthquake Geotechnical Engineering, Balkema.
  • Ishaku J.M., Gadzama E.W., Kaigama U. (2011) Evaluation of empirical formulae for the determination of hydraulic conductivity based on grain-size analysis, J. Geol. Mining Res. 3, 4, 105-113.
  • Jiang Z., Wu K., Couples G., Van Dijke M.I.J., Sorbie K.S., Ma J. (2007) Efficient extraction of networks from three-dimensional porous media, Water Resour. Res. 43, 12. [CrossRef]
  • Jing L., Ma Y., Fang Z. (2001) Modeling of fluid flow and solid deformation for fractured rocks with discontinuous deformation analysis (DDA) method, Int. J. Rock Mech. Mining Sci. 38, 3, 343-355. [CrossRef]
  • Kozeny J. (1927) Ueber kapillare Leitung des Wassers im Boden, Sitzungsberichte der Akademie der Wissenschaften in Wien 136, 2a, 271-306.
  • Ma J., Wu K., Jiang Z., Couples G.D. (2010) SHIFT : An implementation for lattice Boltzmann simulation in low-porosity porous media, Phys. Rev. E 81, 5IFP Energies nouvelles International Conference: Pore2Field – Flows and Mechanics, 056702. [CrossRef]
  • Mansouri M., Delenne J.-Y., Seridi A., El Youssoufi M.S. (2011) Numerical model for the computation of permeability of a cemented granular material, Powder Technol. 208, 2, 532-536. [CrossRef]
  • McNamara S., Flekkøy E.G., Maløy K.J. (2000) Grains and gas flow : Molecular dynamics with hydrodynamic interactions, Phys. Rev. E 61, 4, 4054-4059. [CrossRef]
  • Mohammadzadeh O., Chatzis I. (2010) Pore-Level Investigation of Heavy Oil Recovery using Steam Assisted Gravity Drainage (SAGD), Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles 65, 6, 839-857.
  • Nakasa H., Takeda T., Oda M. (1999) A simulation study on liquefaction using dem, in Earthquake geotechnical engineering, Balkema.
  • Odong J. (2007) Evaluation of empirical formulae for determination of Hydraulic Conductivity based on Grain-Size Analysis, J. Am. Sci. 3, 3, 54-60.
  • Pion S., Teillaud M. (2011) 3D Triangulations, in CGAL User and Reference Manual, CGAL Editorial Board.
  • Renard F., Gundersen E., Hellmann R., Collombet M., Le Guen Y. (2005) Numerical Modeling of the Effect of Carbon Dioxide Sequestration on the Rate of Pressure Solution Creep in Limestone : Preliminary Results, Oil Gas Sci. Technol. – Rev. IFP 60, 2, 381-399. [CrossRef] [EDP Sciences]
  • Sari H., Chareyre B., Catalano E., Philippe P., Vincens E. (2011) Investigation of internal erosion processes using a coupled DEMFluid method, II International Conference on Particle-Based Methods (Particles 2011), Barcelona, Spain, 26-28 Oct.
  • Schlichter C.S. (1905) Field measurements of the rate of movement of underground waters, United States Geological Survey Water Supply Paper 140, 122.
  • Scholtès L., Donzé F.-V. (2012) Modelling progressive failure of fractured rock masses using a 3D Discrete Element Method, Int. J. Rock Mech. Min. Sci. 52, 18-30. [CrossRef]
  • Scholtès L., Hicher P.Y., Nicot F., Chareyre B., Darve F. (2009) On the capillary stress tensor in wet granular materials, Int. J. Numer. Anal. Methods Geomech. 33, 10, 1289-1313. [CrossRef]
  • Šmilauer V., Catalano E., Chareyre B., Dorofeenko S., Duriez J., Gladky A., Kozicki J., Modenese C., Scholtès L., Sibille L., Stránský J., Thoeni K. (2010) Yade Reference Documentation, in Yade Documentation, The Yade Project. Available at http://yadedem.org/doc/.
  • Terzaghi K., Peck R.B. (1964) Soil Mechanics in Engineering Practice, Wiley, New-York.

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.