ogst
Home All issues Volume 66 / No 4 (July-August 2011) Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 66 4 (2011) 549-562 References
IFP Energies nouvelles International Conference: E-COSM'09 - IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling
Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 66, Number 4, July-August 2011
IFP Energies nouvelles International Conference: E-COSM'09 - IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling
Page(s) 549 - 562
DOI https://doi.org/10.2516/ogst/2011102
Published online 09 May 2011
  • Albrecht A., Grondin O., Berr F.L., Solliec G.L. (2007) Towards a Stronger Simulation Support for Engine Control Design: a Methodological Point of View, Oil Gas Sci. Technol. 62, 437-456. [CrossRef] [EDP Sciences] [Google Scholar]
  • Baehr H.D., Stephan K. (2006) Wärme- und Stoffübertragung, Springer, Berlin. [Google Scholar]
  • Barths H., Felsch C., Peters, N. (2009) Mixing models for the two-way-coupling of CFD codes and zero-dimensional multi-zone codes to model HCCI combustion, Combust. Flame 156, 130-139. [CrossRef] [Google Scholar]
  • Barths H., Hasse C., Peters N. (2000) Computational fluid dynamics modelling of non-premixed combustion in direct injection diesel engines, Int. J. Eng. Res. 1, 249-267. [CrossRef] [Google Scholar]
  • Bengtsson J., Strandh P., Johansson R., Tuneståal P., Johansson B. (2006) Hybrid control of homogeneous charge compression ignition (HCCI) engine dynamics, Int. J. Control 79, 422-448. [CrossRef] [Google Scholar]
  • Bengtsson J., Strandh P., Johansson R., Tuneståal P., Johansson B. (2007) Hybrid modelling of homogeneous charge compression ignition (HCCI) engine dynamics — a survey, Int. J. Control 80, 1814-1847. [CrossRef] [Google Scholar]
  • Colin O., Benkenida A. (2004) The 3-Zones Extended Coherent Flame Model (ECFM3Z) for Computing Premixed/Diffusion Combustion, Oil Gas Sci. Technol. 59, 593-609. [Google Scholar]
  • Dec J.E. (2009) Advanced compression-ignition engines - Understanding the in-cylinder processes, Proc. Combust. Inst. 32, 2727-2742. [CrossRef] [Google Scholar]
  • Drews P., Hoffmann K., Beck R., Gasper R., Vanegas A., Felsch C., Peters N., Abel D. (2009) Fast Model Predictive Control for the Air Path of a Turbocharged Diesel Engine, European Control Conference 2009, Budapest, Hungary. [Google Scholar]
  • Eng J.A. (2002) Characterization of Pressure Waves in HCCI Combustion, SAE paper 2002-01-2859. [Google Scholar]
  • ETAS GmbH (2008) ES 1000.3 Benutzerhandbuch, Technical report, ETAS GmbH. [Google Scholar]
  • Felsch C., Dahms R., Glodde B., Vogel S., Jerzembeck S., Peters N., Barths H., Sloane T., Wermuth N., Lippert A.M. (2009) An Interactively Coupled CFD-Multi-Zone Approach to Model HCCI Combustion, Flow Turbul. Combust. 82, 621-641. [CrossRef] [Google Scholar]
  • Felsch C., Hoffmann K., Vanegas A., Drews P., Barths H., Abel D., Peters N. (2009). Combustion model reduction for diesel engine control design, Int. J. Eng. Res. 10, 359-387. [CrossRef] [Google Scholar]
  • Felsch C., Vanegas A., Kerschgens B., Peters N., Hoffmann K., Drews P., Abel D., Barths H. (2008) Systematic Reduction of an Interactively Coupled CFD-Multi-Zone Approach towards a Stand-alone Multi-Zone Model for PCCI Combustion, Thiesel 2008: Thermo-and fluid dynamic processes in Diesel Engines, Universidad Politécnica de Valencia, Valencia, Spain. [Google Scholar]
  • Gamma Technologies (2008) GT-POWER User’s Manual and Tutorial, GT-SUITE Version 7.0, Technical report, Gamma Technologies. [Google Scholar]
  • Guzzella L., Onder C.H. (2004) Introduction to Modeling and Control of Internal Combustion Engine Systems, Springer, Berlin. [Google Scholar]
  • Harada A., Shimazaki N., Sasaki S., Miyamoto T., Akagawa H., Tsujimura K. (1998) The Effects of Mixture Formation on Premixed Lean Diesel Combustion, SAE paper 980533. [Google Scholar]
  • Hergart C.A., Barths H., Siewert R.M. (2005) Modeling Approaches for Partially Premixed Compression Ignition Combustion, SAE paper 2005-01-0218. [Google Scholar]
  • Heywood J.B. (1988) Internal Engine Combustion Fundamentals, McGraw-Hill, New York. [Google Scholar]
  • Hillion M., Buhlbuck H., Chauvin J., Petit N. (2009) Combustion Control of Diesel Engines Using Injection Timing, SAE paper 2009-01-0367. [Google Scholar]
  • Hillion M., Chauvin J., Grondin O., Petit N. (2008) Active Combustion Control of Diesel HCCI Engine: Combustion Timing, SAE paper 2008-01-0984. [Google Scholar]
  • Hoffmann K., Drews P., Abel D., Felsch C., Vanegas A., Peters N. (2009) A Cycle-Based Multi-Zone Simulation Approach Including Cycle-to-Cycle Dynamics for the Development of a Controller for PCCI Combustion, SAE paper 2009-01-0671. [Google Scholar]
  • IAV GmbH (2008) FI2RE - Flexible Injection and Ignition for Rapid Engineering, http://www.iav.com/de/1 engineering/powertrainmechatronik/messtechnik/fi2re.php. [Google Scholar]
  • Iwabuchi Y., Kawai K., Shoji T., Takeda Y. (1999) Trial of New Concept Diesel Combustion System - Premixed Compression Ignited Combustion, SAE paper 1999-01-0185. [Google Scholar]
  • Lunze J. (2008) Regelungstechnik 2: Mehrgrößensysteme, Digitale Regelung, Springer, Berlin. [Google Scholar]
  • Nakayama S., Ibuki T., Hosaki H., Tominaga H. (2008) An Application of a Model Based Combustion Control to Transient Cycle-by-Cycle Diesel Combustion, SAE paper 2008-01-1311. [Google Scholar]
  • Narayanaswamy K., Hessel R.P., Rutland C.J. (2005) A New Approach to Model DI-Diesel HCCI Combustion for Use in Cycle Simulation Studies, SAE paper 2005-01-3743. [Google Scholar]
  • Narayanaswamy K., Rutland C.J. (2006) A Modeling Investigation of Combustion Control Variables During DI-Diesel HCCI Engine Transients, SAE paper 2006-01-1084. [Google Scholar]
  • Nelles O. (2000) Nonlinear System Identification: From Classical Approaches to Neural Networks and Fuzzy Models, Springer, Berlin. [Google Scholar]
  • Peréz E., Blasco X., García-Nieto S., Sanchis J. (2006) Diesel Engine Identification and Predictive Control using Wiener and Hammerstein Models, Proceedings of the 2006 IEEE International Conference on Control Applications, Munich, Germany. [Google Scholar]
  • Peters N., Paczko G., Seiser R., Seshadri K. (2002) Temperature cross-over and non-thermal runaway at two-stage ignition of n-heptane, Combust. Flame 28, 38-59. [CrossRef] [Google Scholar]
  • Pope S.B. (1985) PDF methods for turbulent reactive flows, Prog. Energ. Combust. 11, 119-192. [Google Scholar]
  • Reitz R., Rutland C.J. (1995) Development and testing of diesel engine CFD models, Prog. Energ. Combust. 21, 173-196. [CrossRef] [Google Scholar]
  • Ricardo Software (2003) WAVE Basic Manual, Documentation/ User’s Manual, Version 5.0, Technical report, Ricardo Software. [Google Scholar]
  • Richert F. (2005) Objektorientierte Modellbildung und Nichtlineare Prädiktive Regelung von Dieselmotoren, PhD Thesis, RWTH Aachen University, Germany. [Google Scholar]
  • RWTH Aachen University and Bielefeld University (since 2006) SFB 686 - Modellbasierte Regelung der homogenisierten Niedertemperatur-Verbrennung, http://www.sfb686.rwth-aachen.de. [Google Scholar]
  • Schulze T., Wiedemeier M., Schuette H. (2007) Crank Angle - Based Diesel Engine Modeling for Hardware-in-the-Loop Applications with In-Cylinder Pressure Sensors, SAE paper 2007-01-1303. [Google Scholar]
  • Shaver G.M., Gerdes J.C., Roelle M.J., Caton P.A., Edwards C.F. (2005) Dynamic Modeling of Residual-Affected Homogeneous Charge Compression Ignition Engines with Variable Valve Actuation, J. Dyn. Syst. Meas. Control 127, 374-381. [CrossRef] [Google Scholar]
  • Shaver G.M., Roelle M.J., Caton P.A., Kaahaaina N.B., Ravi N., Hathout J.P., Ahmed J., Kojić A., Park S., Edwards C.F., Gerdes J.C. (2005) A physics-based approach to the control of homogeneous charge compression ignition engines with variable valve actuation, Int. J. Eng. Res. 6, 361-375. [CrossRef] [Google Scholar]
  • Shaver G.M., Roelle M.J., Gerdes J.C. (2006) Modeling cycle-to-cycle dynamics and mode transition in HCCI engines with variable valve actuation, Control Eng. Pract. 14, 213-222. [CrossRef] [Google Scholar]
  • Takeda Y., Keiichi N. (1996) Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection, SAE paper 961163. [Google Scholar]
  • Turin R., Zhang R., Chang M.F. (2008) Systematic Model-Based Engine Control Design, SAE paper 2008-01-0994. [Google Scholar]
  • Vanegas A.,Won H., Felsch C., Gauding M., Peters N. (2008) Experimental Investigation of the Effect of Multiple Injections on Pollutant Formation in a Common-Rail DI Diesel Engine. SAE paper 2008-01-1191. [Google Scholar]
  • Woschni G. (1967) A Universally Applicable Equation for Instantaneous Heat Transfer Coefficients in the Internal Combustion Engine, SAE paper 670931. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.