Dossier: Pipeline Transportation of Heavy Oils
Open Access
Issue
Oil & Gas Science and Technology - Rev. IFP
Volume 59, Number 5, September-October 2004
Dossier: Pipeline Transportation of Heavy Oils
Page(s) 467 - 477
DOI https://doi.org/10.2516/ogst:2004032
Published online 01 December 2006
  • Acevedo, S., Ranaudo, M.A., Escobar, G., Gutierrez, L.B., and Gutierrez, X. (1995) In: Asphaltene Constituents: Fundamentals and Applications, Chapter IV, E.Y. Sheu and O.C. Mullins (eds.), Plenum Press, New York. [Google Scholar]
  • Ali, L.H.,Al-Ghannan, A. and Speight, J.G. (1985) Iraqi J. Sci., 26, 41. [Google Scholar]
  • Altgelt, K.H. (1968) Preprints, Div. Petrol. Chem. Am. Chem. Soc., 13, 3, 37. [Google Scholar]
  • Andersen, S.I. (1997) Petroleum Science and Technology, 15, 185. [Google Scholar]
  • Andersen, S.I. and Birdi, K.S. (1990) Fuel Sci. Technol. Int., 8, 593. [CrossRef] [Google Scholar]
  • Andersen, S.I. and Speight, J.G. (1992) J.G. Preprints, Div. Fuel Chem. Am. Chem. Soc., 37, 3, 1335. [Google Scholar]
  • Andersen, S.I. and Speight, J.G. (2001) Petroleum Science and Technology, 19, 1. [CrossRef] [Google Scholar]
  • ASTM 2002, Annual Book of Standards, American Society for Testing and Materials, West Conshohocken, PA. [Google Scholar]
  • Baker, E.W. (1969) In: Organic Geochemistry, G. Eglinton and M.T.J. Murphy (eds.), Springer-Verlag, New York. [Google Scholar]
  • Bestougeff, M.A. and Darmois, R. (1947) Comptes Rend., 224, 1365. [Google Scholar]
  • Bestougeff, M.A. and Mouton, Y. (1977) Bull. Liason Lab. Pont. Chaus., Special Volume, p. 79. [Google Scholar]
  • Branthaver, J.F. (1990) In: Fuel Science and Technology Handbook, J.G. Speight (ed.), Marcel Dekker Inc., New York. [Google Scholar]
  • Buckley, J.S. (1997) Fuel Science and Technology International, 14, 55. [Google Scholar]
  • Cimino, R., Correrra, S., Del Bianco, A. and Lockhart, T.P. (1995) In: Asphaltene constituents: Fundamentals and Applications, Chapter III, E.Y. Sheu and O.C. Mullins (eds.), Plenum Press, New York.. [Google Scholar]
  • Clerc, R.J. and O'Neal, M.J. (1961) Anal. Chem, 33, 380. [CrossRef] [Google Scholar]
  • Cooley, J., Montgomery, D.S., Pickard, A.L., Hoffman, E.R., Lynch, T., Litka, S.E. and Thomas, K.P. (1988) A Review of Analytical Methods for Bitumens and Heavy Oils. In: AOSTRA Technical Publication Series No. 5., D. Wallace (ed.), Alberta Oil Sands and Research Authority, Edmonton, Alberta, Canada, p. 100. [Google Scholar]
  • Drushel, H.V. (1970) Preprints, Div. Petrol. Chem. Am. Chem. Soc., 15, C13. [Google Scholar]
  • Francisco, M.A. and Speight. J.G. (1984) Preprints, Div. Fuel. Chem. Am. Chem. Soc., 29, 1, 36. [Google Scholar]
  • Girdler, R.B. (1965) Proc. Assoc. Asphalt Paving Technol., 34, 45. [Google Scholar]
  • Grader, R. (1942) Oel Kohle, 38, 867. [Google Scholar]
  • Griffin, R.L., Simpson. W.C. and Miles. T.K. (1959) Chem. Eng. Data, 4, 4, 349. [CrossRef] [Google Scholar]
  • Hillman, E. and Barnett, B. (1937) Proceedings. 4th Ann. Meet., ASTM, 37, 2, 558. [Google Scholar]
  • IP 2002 Standard No. 143. Standard Methods for Analysis and Testing of Petroleum and Related Products 199, Institute of Petroleum, London, England. [Google Scholar]
  • Jacobson, J.M. and Gray, M.R. (1987) Fuel, 66, 749 [CrossRef] [Google Scholar]
  • .Kam’yanov, V.F.,Gorbunova, L.V. and Shabotkin, I.G. (1996) Neftekhimiya, 36, 3. [Google Scholar]
  • Katz, M. (1934) Can. J. Res., 10, 435. [CrossRef] [Google Scholar]
  • Keleman, S.R.,George, G.N., and Gorbaty, M.L. (1990) Fuel, 69, 939. [CrossRef] [Google Scholar]
  • Kirby, W. (1943) Chem. Ind., 62, 58. [CrossRef] [Google Scholar]
  • Koots, J.A. and Speight. J.G. (1975) Fue1, 54, 179. [Google Scholar]
  • Labout, J.W.A. (1950) In: Properties of Asphalitic Bitumen, J.P. Pfeiffer (ed.), Elsevier, Amsterdam, The Netherlands. [Google Scholar]
  • Lerer, M. (1934) Ann. Comb. Liq., 9, 511. [Google Scholar]
  • Li, M., Christy, A.A., and Sj�, J. (1992) Emulsions - A Fundamental and Practical Approach, J. Sj�m (ed.), Kluwer Academic Publishers, Amsterdam, The Netherlands, p. 157. [Google Scholar]
  • Li, S.,Liu, C.,Que, G.,Liang, W. and Zhu, Y. (1997) Fuel, 76, 1459. [CrossRef] [Google Scholar]
  • Lin, J.R. and Yen, T.F. (1994) In: Asphaltene Particles in Fossil Fuel Exploration, Recovery, Refining, and Production Processes, M.K. Sharma and T.F. Yen (eds.) Plenum Press, New York, 171. [Google Scholar]
  • Long, R.B. (1979) Preprints, Div. Petrol. Chem. Am. Chem. Soc., 24, 4, 891. [Google Scholar]
  • Long, R.B. (1981) The Chemistry of Asphaltene Constituents. In: Advances in Chemistry, Series No. 195, J.W. Bunger and N. Li (eds), American Chemical Society, Washington, DC. [Google Scholar]
  • Long, R.B. and Speight, J.G. (1989) Revue de l’ Institut Français du Pétrole, 44, 205. [CrossRef] [EDP Sciences] [Google Scholar]
  • Long, R.B. and Speight, J.G. (1998) In: Petroleum Chemistry and Refining, Chapter 2, J.G. Speight (ed.), Taylor & Francis, Washington, DC. 1998. [Google Scholar]
  • Mack, C. (1932) Phys. Chem., 36, 2901. [CrossRef] [Google Scholar]
  • Markhasin, I.L.,Svirskaya, O.D. and Strads, L.N. (1969) Kolloid Zeitung, 31, 299. [Google Scholar]
  • McLean, J.D. and Kilpatrick, P.K. (1997) J. Colloid and Interface Science, 189, 242. [CrossRef] [Google Scholar]
  • Mitchell, D.L. and Speight, J.G. (1973) Fuel, 52, 149. [CrossRef] [Google Scholar]
  • Mitra-Kirtley, S.,Mullins, O.C., van Elp, J.,George, S. J.,Chen, J., and Cramer, S.P. (1993) J. Am. Chem. Soc., 115, 252. [CrossRef] [Google Scholar]
  • Moschopedis, S.E. and Speight. J.G. (1976a) Fuel, 55, 187. [CrossRef] [Google Scholar]
  • Moschopedis, S.E. and Speight, J.G. (1976b) Fuel, 55, 334. [CrossRef] [Google Scholar]
  • Moschopedis, S.E. and Speight, J.G. (1978) Fuel, 57, 235. [CrossRef] [Google Scholar]
  • Moschopedis, S.E.,Fryer, J.F. and Speight, J.G. (1976) Fuel, 55, 227. [CrossRef] [Google Scholar]
  • Mullins, O.C. (1995) In: Asphaltene Constituents: Fundamentals and Applications, Chapter II, E.Y. Sheu and O.C. Mullins (eds.), Plenum Press, New York. [Google Scholar]
  • Nicksic, S.W. and Jeffries-Harris, M.J. (1968) J. Inst. Petroleum, 54, 107. [Google Scholar]
  • Overfield, R.E.,Sheu, E.Y.,Sinha, S.K. and Liang, K.S. (1989) Fuel Sci. Technol. Int., 7, 611. [CrossRef] [Google Scholar]
  • Petersen, J.C., Barbour, F.A and Dorrence. S.M. (1974) Proc. Assoc. Asphalt Paving Technol., 43, 162. [Google Scholar]
  • Petrova, L.M.,Lifanova, Ye.V.,Yusupova, T.N.,Mukhametshin, R.Z. and Romanoz, G.V. (1995) Neftekhimiya, 35, 508. [Google Scholar]
  • Pfeiffer, J.P. and Saal, R.N. (1940) Phys. Chem., 44, 139. [Google Scholar]
  • Premuzic, E.T, and Lin, M.S. (1999) J. Petroleum Science and Engineering, 22, 171. [CrossRef] [Google Scholar]
  • Ravey, J.C.,Decouret, G. and Espinat, D. (1988) Fuel, 67, 1560. [CrossRef] [Google Scholar]
  • Ray, B.R., Witherspoon, P.A. and Grim, R.E. (1957) Phys. Chem., 61, 1296. [CrossRef] [Google Scholar]
  • Reerink, H. (1973) Ind. Eng. Chem. Prod. Res. Dev., 12, 82. [CrossRef] [Google Scholar]
  • Reynolds, J.G. (1998) In: Petroleum Chemistry and Refining, Chapter 3, Taylor & Francis Publishers, Washington, DC. [Google Scholar]
  • Reynolds, J.G. (2000) In: Asphaltene Constituents and Asphalts. I. Developments in Petroleum Science, Chapter 3, 40b, T.F. Yen and G.V. Chilingarian (eds), Elsevier, Amsterdam, The Netherlands. [Google Scholar]
  • Ritchie, R.G.S.,Roche, R.S. and Steedman, W. (1979) Fuel, 58, 523. [CrossRef] [Google Scholar]
  • Rose, K.D. and Francisco, M. A. (1987) Energy and Fuels, 1, 233. [CrossRef] [Google Scholar]
  • Rose, K.D. and Francisco, M.A. (1988) J. Am. Chem. Soc., 110, 637. [CrossRef] [Google Scholar]
  • Sakhanov, A. and Vassiliev, N. (1927) Petrol. Zeitung, 23, 1618 [Google Scholar]
  • .Schabron, J.F. and Speight, J.G. (1998) Petroleum Science and Technology, 16, 361. [CrossRef] [Google Scholar]
  • Schmitter, J.M.,Garrigues, P.,Ignatiadis, I., De Vazelhes, R.,Perin, F.,Ewald, M. and Arpino, P. (1984) Org. Geochem., 6, 579. [CrossRef] [Google Scholar]
  • Selucky, M.L., Kim, S.S., Skinner, F., and Strausz, O.P. (1981) The Chemistry of Asphaltene Constituents. In: Advances in Chemistry Series No. 195, J.W. Bunger and N.C. Li (eds.), American Chemical Society, Washington. DC. [Google Scholar]
  • Sheu, E.Y., DeTar, M. M., Storm, D.A., and DeCanio, S. J. (1992) Fuel, 71, 299. [CrossRef] [Google Scholar]
  • Speight, J.G. (1979) Studies on Bitumen Fractionation. Information Series No. 84, Alberta Research Council, Edmonton, Alberta, Canada. [Google Scholar]
  • Speight, J.G. (1994) In: Asphaltene constituents and Asphalts. I. Developments in Petroleum Science, Chapter 2, 40a, T.F. Yen and G.V. Chilingarian (eds), Elsevier, Amsterdam, The Netherlands. [Google Scholar]
  • Speight, J.G. (1999) The Chemistry and Technology of Petroleum, Chapter 10, 3rd Edition, Marcel Dekker Inc., New York. [Google Scholar]
  • Speight, J.G. (2001) Handbook of Petroleum Analysis, John Wiley & Sons Inc., New York. [Google Scholar]
  • Speight, J.G. and Moschopedis, S.E. (1981) Chemistry of Asphaltene Constituents. In: Advances in Chemistry Series No. 195, J.W. Bunger and N.C. Li (eds.), American Chemical Society, Washington. D.C. [Google Scholar]
  • Speight, J.G. and Pancirov, R.J. (1984) Liquid Fuels Technol, 2, 287. [CrossRef] [Google Scholar]
  • Speight, J.G.,Long, R.B. and Trowbridge, T.D. (1984) Fuel, 63, 616. [CrossRef] [Google Scholar]
  • Speight, J.G.,Wernick, D.L.,Gould, K.A.,Overfield, R.E.,Rao, B.M.L. and Savage, D.W. (1985) Rev. Inst. Fran栩s du P賲ole, 40, 51. [Google Scholar]
  • Swanson, J.M. (1942) J. Phys. Chem., 46, 141. [CrossRef] [Google Scholar]
  • Syncrude Research. (1979) Syncrude Analytical Methods for Oil Sand and Bitumen Processing, Alberta Oil Sands Technology and Research Authority, Edmonton, Alberta Canada, p. 121. [Google Scholar]
  • Thiyagarajan, P.,Hunt, J.E.,Winans, R.E.,Anderson, K.B. and Miller, J.T. (1995) Energy & Fuels, 9, 629. [Google Scholar]
  • Tissot, B. (1984) Characterization of Heavy Crude Oils and Petroleum Residues, Ȥitions Technip, Paris, France. [Google Scholar]
  • Wales, M., and van der Waarden, M. (1964) Preprints, Div. Petrol. Chem. Am. Chem. Soc., 9, 2, B-21. [Google Scholar]
  • Wiehe, I.A. (1993) Ind. Eng. Chem. Res., 32, 447. [CrossRef] [Google Scholar]
  • Wiehe, I.A. (1994) Energy & Fuels, 8, 536. [CrossRef] [Google Scholar]
  • Wiehe, I.A. (1995) In. Eng. Chem. Res., 34, 661. [CrossRef] [Google Scholar]
  • Wiehe, I.A. and Liang, K.S. (1996) Fluid Phase Equilibria, 117, 201. [CrossRef] [Google Scholar]
  • Winniford, R.S. (1963) Inst. Petroleum Rev., 49, 215. [Google Scholar]
  • Yan, J., Plancher, H. and Morrow, N.R. (1997) Paper 37232. SPE International Symposium on Oilfield Chemistry, Houston, TX. [Google Scholar]
  • Yen, T.F. (1974) Energy Sources, 1, 447. [Google Scholar]
  • Yen, T.F. (1975) The Role of Trace Metals in Petroleum, Ann Arbor Science Publishers Inc., Ann Arbor, Michigan. [Google Scholar]
  • Yen, T.F. (1984) In: The Future of Heavy Crude Oil and Tar Sands, R.F. Meyer, J.C. Wynn, and J.C. Olson (eds), McGraw- Hill, New York, p. 412. [Google Scholar]
  • Yen, T.F. (2000) In: Asphaltene constituents and Asphalts. I. Developments in Petroleum Science, Chapter 2, 40b, T.F. Yen and G.V. Chilingarian (eds), Elsevier, Amsterdam, The Netherlands. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.