Open Access
Oil & Gas Science and Technology - Rev. IFP
Volume 55, Number 1, January-February 2000
Page(s) 35 - 66
Published online 01 November 2006
  • Agar, J.,Morgenstern, N. et Scott, J. (1987) Shear Strength and Stress-Strain Behaviour of Athabasca Oil Sand at Elevated Temperatures and Pressures. Can. Geotech. J., 24, 1-10. [CrossRef] [Google Scholar]
  • Betata, S. (1998) Les écoulements polyphasiques aux abords des puits dans les gisements d’hydrocarbures. Thèse, université Paris VI. [Google Scholar]
  • Bora, R., Maini, B. et Chakma, A. (1997) Flow Visualization Studies of Solution Gas Drive Process in Heavy Oil Reservoirs Using a Glass Micromodel. SPE 37519. [Google Scholar]
  • Cerasi, P. (1996) Étude de la croissance d’une instabilité d’érosion dans un milieu poreux non consolidé. Application à l’angiogenèse. Thèse, Paris VII. [Google Scholar]
  • Claridge, E. et Prats, M. (1995) A Proposed Model and Mechanism for Anomalous Foamy Heavy Oil Behavior. SPE 29243. [Google Scholar]
  • Coombe, D. et Maini, B. (1994) Workshop on Foamy Oil Flow Held at the Petroleum Recovery Institute. [Google Scholar]
  • Dusseault, M. et Morgenstern, N. (1978) Shear Strength of Athabasca Oil Sands. Can. Geotech. J., 15, 216-238. [CrossRef] [Google Scholar]
  • Dusseault, M. et Van Domselaar, H. (1982) Unconsolidated Sand Sampling in Canadian and Venezuelan Oil Sands. 2nd Unitar Conf. [Google Scholar]
  • Dusseault, M. (1993) Cold Production and Enhanced Oil Recovery. JCPT, 32, 9. [CrossRef] [Google Scholar]
  • Dusseault, M., Geilikman, M. et Roggensack, W. (1995) Practical Requirements for Sand Production Implementation in Heavy Oil. SPE 30250. [Google Scholar]
  • Dusseault, M., Geilickman, M. et Spanos, T. (1998a) Mechanisms of Sand Production. SPE 27343. [Google Scholar]
  • Dusseault, M. (1998b) Canadian Heavy Oil Production Experience Using Cold Production. Trinidad and Tobago SPE Conf. [Google Scholar]
  • Elkins, L., Morton, D. et Blackwell, W. (1972) Experimental Fireflood in a Very Viscous Oil-Consolidated Sand Reservoir. SPE 4086. [Google Scholar]
  • Firoozabadi, A. Pooladi-Darvish, M. et Eleri, V. (1997a) Gas and Liquid Mobilities in Cold Production of Heavy Oil Reservoirs. SPE 38873. [Google Scholar]
  • Firoozabadi et al. (1997b) Solution Gas Drive in Heavy Oil Reservoirs. CIM 97-113. [Google Scholar]
  • Geilikman, M., Dusseault, M. et Dullien, F. (1994a) Fluid Production Enhancement by Exploiting Sand Production. SPE/DOE 27797. [Google Scholar]
  • Geilikman, M., Dusseault, M. et Dullien, F. (1994b) Sand Production as a Viscoplastic Granular Flow. SPE 27343. [Google Scholar]
  • Geilikman, M., Dusseault, M. et Dullien, F. (1994c) Fluid- Saturated Solid Flow with Propagation of a Yielding Front. Eurock ’94, SPE/ISRM Conf. [Google Scholar]
  • Geilikman, M., Dusseault, M. et Dullien, F. (1994d) Sand Production and Yield Propagation around Wellbores. CIM 94-89. [Google Scholar]
  • Geilikman, M., Dusseault, M. et Dullien, F. (1995a) Dynamic Effects of Foamy Fluid Flow in Sand Production Instability. SPE 30251. [Google Scholar]
  • Geilikman, M., Dusseault, M. et Dullien, F. (1995b) Fluid Rate in Flowing Granular Medium with Moving Boundary. ECMOR Conf. [Google Scholar]
  • Geilikman, M., Dullien, F. et Dusseault, M. (1997a) Erosional Creep of Fluid-Saturated Granular Medium. J. of Eng. Mech. [Google Scholar]
  • Geilikman, M. et Dusseault, M. (1997b) Dynamics of Wormholes and Enhancement of Fluid Production. 48th Annual Technical Meeting of the Petroleum Society in Calgary. [Google Scholar]
  • Gonzalez, R. et Brunings, C. (1996) Influence of Increased Pump Frequency in the Production of the Orinoco Belt Foamy Extra Heavy Crude Oil. ESP Workshop. [Google Scholar]
  • Huang. B., Marcum, B., Chase, M. et Yu, C. (1997) Cold Production of Heavy Oil From Horizontal Wells in the Frog Lake Field. SPE 37545. [Google Scholar]
  • Huerta, M., Otero, C., Rico, A., Jimenez, I., Mirabal, M. de et Rojas, G. (1996) Understanding Foamy Oil Mechanisms for Heavy Oil Reservoirs during Primary Production. SPE 36749. [Google Scholar]
  • Karyampudi, S. (1993) Evaluation of Cyclic Steam Performance and Mechanisms in Mobile Heavy Oil Reservoir at Elk Point Thermal Pilot. CIM 93-48. [Google Scholar]
  • Kashchiev, D. et Firoozabadi, A. (1993) Kinetics of the Initial Stage of Isothermal Gas Phase Formation. J. Chem. Phys., 98, 6, 4690-4699. [CrossRef] [Google Scholar]
  • Kraus, W., McCaffrey, W. et Boyd, G. (1993) Pseudo-Bubble Point Model for Foamy Oils. CIM 93-45. [Google Scholar]
  • Lea, J., Anderson, P. et Anderson, D. (1987) Optimization of Progressive Cavity Pump Systems in the Development of the Clear-Water Heavy Oil Reservoir. CIM 87-38. [Google Scholar]
  • Lebel, J.P. (1994) Performance Implications of Various Reservoir Access Geometries. 11th Annual Heavy Oil & Oil Sands Symposium. [Google Scholar]
  • Loughead, D. et Saltuklaroglu, M. (1992) Lloydminster Heavy Oil Production - Why so Unusual? 9th Heavy Oil Symposium. [Google Scholar]
  • Maini, B.,Sarma, H. et George, A. (1993) Significance of Foam- Oil Behaviour in Primary Production of Heavy Oils. JCPT, 32, 9. [CrossRef] [Google Scholar]
  • Maini, B. et Sarma, H. (1994) Role of Nonpolar Foams in Production of Heavy Oils. Advances in Chem. Series, 242, 405-420. [CrossRef] [Google Scholar]
  • Maini, B. (1995) Laboratory Investigation of Foamy Oil Flow for Improved Primary Production, Canmet. [Google Scholar]
  • Maini, B. (1996) Foamy Oil Flow in Heavy Oil Production. JCPT, 35, 6, 21-24. [CrossRef] [Google Scholar]
  • Metwally, M. et Solanki, S. (1995) Heavy Oil Reservoir Mechanisms, Lindbergh and Frog Lake Fields, Alberta – Part I: Field Observations and Reservoir Simulation. CIM 95-63. [Google Scholar]
  • Metwally, M. (1996) Pressure Cycling Process for Depleted Heavy Oil Reservoirs. CIM 96-68. [Google Scholar]
  • Mirabal, M. de (1996a) Integrated Study for the Characterization and Development of the MFB-53 Reservoir, North Hamaca- Orinoco Belt, Venezuela. SPE 36095. [Google Scholar]
  • Mirabal, M. de (1996b) Impact of Foamy Oil Mechanism on the Hamaca Oil Reserves Orinoco Belt, Venezuela. SPE 36140. [Google Scholar]
  • Mirabal, M. de, Rodriguez, H. et Gordillo, R. (1997) Production Improvement Strategy for Foamy Hamaca Crude Oil: A Field Case. SPE 37544. [Google Scholar]
  • Monnet, A. (1998) Boulance, érosion interne, renard. Les instabilités sous écoulement. Revue Francaise de Géotechnique, 82, 3-10. [CrossRef] [Google Scholar]
  • Moulu, J.C. et Longeron, D. (1989) Solution Gas Drive: Experiments and Simulation. 5th Eur. Symp. on IOR. [Google Scholar]
  • Rodriguez, H., Sliva, R., Zerpa, L., Fung, L. et Camino, M. (1996) Stability Analysis of Horizontal Wells in Orinoco Belt, Venezuela. SPE 36076. [Google Scholar]
  • Rodriguez, H., Vaca, P., Gonzalez, O. et Mirabal, M. de (1997) Integrated Study of a Heavy Oil Reservoir in the Orinoco Belt: a Field Case Simulation. SPE 38015. [Google Scholar]
  • Sarma, H. et Maini, B. (1993) An Experimental Evaluation of Viscosity Grading for Controlling Fingering in Miscible Displacements. JCPT, 32, 1. [CrossRef] [Google Scholar]
  • Shen, C. et Batycky, J. (1996) Some Observations of Mobility Enhancement of Heavy Oils Flowing Through Sand Pack Under Solution Gas Drive. CIM 96-27. [Google Scholar]
  • Sheng, J., Hayes, R., Tortike, W. et Maini, B. (1995a) A Proposed Dynamic Model for Foamy Oil Properties. SPE 30253. [Google Scholar]
  • Sheng, J., Maini. B., Hayes, R. et Tortike, W. (1995b) A Non- Equilibrium Model to Calculate Foamy Oil Properties. CIM 95-19. [Google Scholar]
  • Sheng, J., Hayes, R., Maini, B. et Tortike, W. (1996) A Dynamic Model to Simulate Foamy Oil Flow in Porous Media. SPE 36750. [Google Scholar]
  • Sheng, J.,Hayes, R. et Maini, B. (1997a) Experimental Study of Foamy Oil Stability. JCPT, 36, 4. [CrossRef] [Google Scholar]
  • Sheng, J. (1997b) Foamy Oil Flow in Porous Media. Thèse, universités Edmonton, Alberta. [Google Scholar]
  • Smith, G. (1988) Fluid Flow and Sand Production in Heavy Oil Reservoirs Under Solution Gas Drive. SPEPE, 3, 2, 169-180. [CrossRef] [Google Scholar]
  • Solanki, S. et Metwally, M. (1995) Heavy Oil Reservoir Mechanisms, Lindbergh and Frog Lake Fields, Alberta - Part. II: Geomechanical Evaluation. SPE 30249. [Google Scholar]
  • Squires, A. (1993) Inter-Well Tracer Results and Gel Blocking Program. 10th Annual Heavy Oil & Oil Sands Symposium. [Google Scholar]
  • Treinen, R., Ring, W., Spence, A., Mirabal, M. de et Huerta, M. (1997) Hamaca: Solution Gas Drive Recovery in a Heavy Oil Reservoir, Experimental Results. SPE 39031. [Google Scholar]
  • Tremblay, B., Sedgwick, G. et Forshner, K. (1995) Imaging of Sand Production in Horizontal Packs by X-ray Computer Tomography. 6th Unitar Conf. [Google Scholar]
  • Tremblay, B., Sedgwick, G. et Forshner, K. (1996a) Modelling of Sand Production from Wells on Primary Recovery. CIM 96-26. [Google Scholar]
  • Tremblay, B., Sedgwick, G. et Forshner, K. (1996b) Simulation of Cold Production in Heavy Oil Reservoirs: Wormholes Dynamics. SPE 35387. [Google Scholar]
  • Tremblay, B., Oldakowski, K. et Settari, A. (1997) Geomechanical Properties of Oil Sands at Low Effective Stress. 48th Annual Technical Meeting of the Petroleum Society. [Google Scholar]
  • Tremblay, B., Sedgwick, G. et Vu, D. (1998) CT Imaging of Wormhole Growth under Solution Gas Drive. SPE 39638. [Google Scholar]
  • Tremblay, B., Sedgwick, G., Vu, D., Lillico, D., Jossy, E., Yuan, J.Y., Babchin, A. et Sawatzky, R. (1998a) Cold Production in Heavy Oil Reservoirs. Poster, 15th World Petroleum Congress. [Google Scholar]
  • Tremblay, B., Sedgwick, G. et Vu, D. (1998b) CT Imaging of Sand Production in a Horizontal Sand Pack Using Live Oil. 49th Annual Technical Meeting of the Petroleum Society. [Google Scholar]
  • Vaziri, H., Phillips, R. et Hurley, P. (1997) Physical Modeling of Sand Production. Int. J. Rock Mech. & Min. Sci., 34, 3-4, article 323. [Google Scholar]
  • Wang, Y. et Dusseault, M. (1995) Response of a Circular Opening in a Friable Low-Permeability Medium to Temperature and Pore Pressure Changes. Int. J. Num. Anal. Meth. Geom., 19, 157-179. [CrossRef] [Google Scholar]
  • Wang, Y. et Dusseault, M. (1996a) Sand Production Potential near Inclined, Perforated Wellbores. CIM 96-70. [Google Scholar]
  • Wang, Y. (1996b) The Effect of a Nonlinear Mohr-Coulomb Criteria on the Stresses and Plastic Deformation near a Circular Opening in Poorly Consolidated Permeable Medium. Int. J. Rock Mech. & Min. Eng. Geomec. Abs., 33 (2), 197-203. [CrossRef] [Google Scholar]
  • Xuehai, L. et Yortsos, Y. (1993) Critical Gaz Saturation: Modelling and Sensitivities Studies. SPE 26662. [Google Scholar]
  • Yuan, J., Babchin, A. et Tremblay, B. (1998) Modeling Wormhole Flow in Cold Production. 49th Annual Technical Meeting of the Petroleum Society. [Google Scholar]
  • Yuan, J., Tremblay, B. et Babchin, A. (1999) A Wormhole Network Model of Cold Production in Heavy Oil. SPE 54097. [Google Scholar]
  • Yeung, K. et Adamson, M. (1992) Burnt Lake Project - Bitumen Production from the Cold Lake Oil Sands Deposit Without Steam. CIM 92. [Google Scholar]
  • Yeung, K. (1995) Cold Flow Production of Crude Bitumen at the Burnt Lake Project, Northeastern Alberta. 6th Unitar Conf. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.