Table 6
Parameters used in the two-layer models shown in Figure 13.
| Porosity | V p (km/s) | V s (km/s) | Density (g/cm3) | P pore (MPa) | Sco2 (%) | |
|---|---|---|---|---|---|---|
| Cap reservoir | 5.35 | 2.97 | 2.843 | |||
| 0.2 | 3.459 | 1.935 | 2.355 | 15 | 5 | |
| 0.2 | 3.483 | 2.006 | 2.328 | 8 | 20 | |
| 0.21 | 3.461 | 1.993 | 2.301 | 8 | 20 | |
| 0.22 | 3.437 | 1.98 | 2.29 | 8 | 20 | |
| 0.23 | 3.415 | 1.967 | 2.269 | 8 | 20 | |
| 0.2 | 3.401 | 1.944 | 2.333 | 15 | 20 | |
| 0.21 | 3.379 | 1.931 | 2.313 | 15 | 20 | |
| 0.22 | 3.355 | 1.918 | 2.295 | 15 | 20 | |
| 0.23 | 3.332 | 1.905 | 2.275 | 15 | 20 |
Notes. V p , P-wave velocity; P pore, pore pressure; V s , S-wave velocity; Sco2, CO2 saturation.