Geomechanical key parameters of the process of hydraulic fracturing propagation in fractured medium
Faculty of Engineering, Tarbiat Modares University, 14115-111 Tehran, Iran
* Corresponding author: email@example.com
Accepted: 15 April 2019
Hydraulic Fracturing (HF) is a well-stimulation technique that creates fractures in rock formations through the injection of hydraulically pressurized fluid. Because of the interaction between HF and Natural Fractures (NFs), this process in fractured reservoirs is different from conventional reservoirs. This paper focuses mainly on three effects including anisotropy in the reservoir, strength parameters of discontinuities, and fracture density on HF propagation process using a numerical simulation of Discrete Element Method (DEM). To achieve this aim, a comprehensive study was performed with considering different situations of in situ stress, the presence of a joint set, and different fracture network density in numerical models. The analysis results showed that these factors play a crucial role in HF propagation process. It also was indicated that HF propagation path is not always along the maximum principal stress direction. The results of the numerical models displayed that the affected area under HF treatment is decreased with increasing the strength parameters of natural fracture and decreasing fracture intensity.
© R. Basirat et al., published by IFP Energies nouvelles, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.