Large-Eddy Simulation (LES) of Spray Transients: Start and End of Injection Phenomena
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 71 1 (2016) 4
Publié en ligne : 2016-01-22
Article cité par
La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).
Article cité :
Citations de cet article :
EFFECT OF MIXING PORT LENGTH ON INTERNAL FLOW AND NEAR-FIELD JET CHARACTERISTICS OF TWIN-FLUID ATOMIZERS
Yicheng Deng, Wenjing Xing, Yu Jin, Xianyin Leng, Kazunori Sato, Keiya Nishida, Youichi Ogata and Sushil RautAtomization and Sprays 34 (8) 55 (2024)
https://doi.org/10.1615/AtomizSpr.2024051254
Study of the effect of cavitation flow patterns in diesel injector nozzles on near-field spray atomization characteristics using a LES-VOF method
Bihe Hu, Zhixia He, Chen Li, Yicheng Deng, Wei Guan, Liang Zhang and Genmiao GuoInternational Journal of Multiphase Flow 174 104791 (2024)
https://doi.org/10.1016/j.ijmultiphaseflow.2024.104791
Thermal and fluid aspects of dual piezoelectric jet pump of double chambers
Haider F. Jasim and Muneer A. IsmaelApplied Thermal Engineering 244 122698 (2024)
https://doi.org/10.1016/j.applthermaleng.2024.122698
A numerical study on the in-nozzle cavitating flow and near-field jet breakup of a spirally grooved hole nozzle using a LES-VOF method
Xianyin Leng, Yicheng Deng, Wei Guan, Weibo Xie, Zhixia He, Qian Wang, Xuesheng Yan and Wuqiang LongFuel 326 125016 (2022)
https://doi.org/10.1016/j.fuel.2022.125016
A numerical study on the in-nozzle cavitating flow and near-field atomization of cylindrical, V-type, and Y-type intersecting hole nozzles using the LES-VOF method
Yicheng Deng, Xianyin Leng, Wei Guan, et al.Green Processing and Synthesis 11 (1) 129 (2022)
https://doi.org/10.1515/gps-2022-0015
Numerical study of purging of a gasoline direct injection nozzle at the end of injection
Sandeep Mouvanal, Axel Burkhardt, Shamit Bakshi and Dhiman ChatterjeeInternational Journal of Engine Research 22 (5) 1670 (2021)
https://doi.org/10.1177/1468087420916658
Large eddy simulation of a double-injection cycle and the impact of the needle motion on the sac-volume flow characteristics of a single-orifice diesel injector
Mohamed Chouak, Louis Dufresne and Patrice SeersInternational Journal of Engine Research 22 (8) 2464 (2021)
https://doi.org/10.1177/1468087420951326
Investigation of cavitation and air entrainment during pilot injection in real-size multi-hole diesel nozzles
Eduardo Gomez Santos, Junmei Shi, Manolis Gavaises, et al.Fuel 263 116746 (2020)
https://doi.org/10.1016/j.fuel.2019.116746
Stereoscopic high-speed microscopy to understand transient internal flow processes in high-pressure nozzles
J. Manin, L.M. Pickett and K. YasutomiExperimental Thermal and Fluid Science 114 110027 (2020)
https://doi.org/10.1016/j.expthermflusci.2019.110027
Real-fluid injection modeling and LES simulation of the ECN Spray A injector using a fully compressible two-phase flow approach
Songzhi Yang, Ping Yi and Chaouki HabchiInternational Journal of Multiphase Flow 122 103145 (2020)
https://doi.org/10.1016/j.ijmultiphaseflow.2019.103145
Simulation and Measurement of Transient Fluid Phenomena within Diesel Injection
Martin Gold, Richard Pearson, Jack Turner, Dan Sykes, Viacheslav Stetsyuk, Guillaume de Sercey, Cyril Crua, Mithun Murali-Girija, Foivos Koukouvinis and Manolis GavaisesSAE International Journal of Advances and Current Practices in Mobility 1 (1) 291 (2019)
https://doi.org/10.4271/2019-01-0066
1 (2019)
https://doi.org/10.4271/2019-01-2280
1 (2019)
https://doi.org/10.4271/2019-01-0059
1 (2019)
https://doi.org/10.4271/2019-01-0281
Two-Phase Flow for Automotive and Power Generation Sectors
Kaushik Saha, Michele Battistoni, Sibendu Som and Xianguo LiEnergy, Environment, and Sustainability, Two-Phase Flow for Automotive and Power Generation Sectors 185 (2019)
https://doi.org/10.1007/978-981-13-3256-2_7
Advanced Computational Fluid Dynamics for Emerging Engineering Processes - Eulerian vs. Lagrangian
Carlos G. Sedano, César Augusto Aguirre and Armando B. BrizuelaAdvanced Computational Fluid Dynamics for Emerging Engineering Processes - Eulerian vs. Lagrangian (2019)
https://doi.org/10.5772/intechopen.81110
Experimental and numerical study on the initial tip structure evolution of diesel fuel spray under various injection and ambient pressures
Longfei Chen, Guangze Li, Dongqi Huang, et al.Energy 186 115867 (2019)
https://doi.org/10.1016/j.energy.2019.115867
Single Orifice Diesel Injector Flow Characterization and the Impact of Needle Lift Using Large Eddy Simulation and Proper Orthogonal Decomposition
Mohamed Chouak, Louis Dufresne and Patrice SeersJournal of Fluids Engineering 141 (5) (2019)
https://doi.org/10.1115/1.4041642
Effect of the scale resolution on the two phase coupling characteristics of high speed evaporating sprays using LES / Eulerian-Lagrangian methodologies
C. Li, C. Crua and K. VogiatzakiInternational Journal of Multiphase Flow 120 103060 (2019)
https://doi.org/10.1016/j.ijmultiphaseflow.2019.06.013
Highly resolved Eulerian simulations of fuel spray transients in single and multi-hole injectors: Nozzle flow and near-exit dynamics
Michele Battistoni, Sibendu Som and Christopher F. PowellFuel 251 709 (2019)
https://doi.org/10.1016/j.fuel.2019.04.076
A comparison of computational fluid dynamics predicted initial liquid penetration using rate of injection profiles generated using two different measurement techniques
Haiwen Ge, Jaclyn E Johnson, Hari Krishnamoorthy, Seong-Young Lee, Jeffrey D Naber, Nan Robarge and Eric KurtzInternational Journal of Engine Research 20 (2) 226 (2019)
https://doi.org/10.1177/1468087417746475
1 (2019)
https://doi.org/10.4271/2019-01-0271
Effect of residual air bubbles on diesel spray structure at the start of injection
M. Ghiji, L. Goldsworthy, V. Garaniya, et al.Fuel 241 25 (2019)
https://doi.org/10.1016/j.fuel.2018.12.013
Computational investigation of diesel nozzle internal flow during the complete injection event
F. J. Salvador, J. De la Morena, G. Bracho and D. JaramilloJournal of the Brazilian Society of Mechanical Sciences and Engineering 40 (3) (2018)
https://doi.org/10.1007/s40430-018-1074-z
Microscopic investigation of near-field spray characteristics of 2-methylfuran, ethanol and isooctane under flash boiling conditions
Bo Wang, Ziman Wang, Xiuchao Bao, et al.Fuel 215 142 (2018)
https://doi.org/10.1016/j.fuel.2017.10.035
Effect of valve offset on inner nozzle flow and spray shape of fuel injector for gasoline direct injection engine
Kazuki YOSHIMURA, Tomoyuki HOSAKA, Yoshihito YASUKAWA, et al.Transactions of the JSME (in Japanese) 84 (861) 18-00068 (2018)
https://doi.org/10.1299/transjsme.18-00068
1 (2017)
https://doi.org/10.4271/2017-01-2314
A numerical study of the thermal transient in high-pressure diesel injection
Marco Arienti and Mark SussmanInternational Journal of Multiphase Flow 88 205 (2017)
https://doi.org/10.1016/j.ijmultiphaseflow.2016.09.017
Editorial: IFP Energies nouvelles International Conference LES4ICE 2014 – Large-Eddy Simulation for Internal Combustion Engine Flows
C. Angelberger and C. Mounaim-RousselleOil & Gas Science and Technology – Revue d’IFP Energies nouvelles 71 (1) E1 (2016)
https://doi.org/10.2516/ogst/2015048
Effects of End-of-Injection Transients on Combustion Recession in Diesel Sprays
Benjamin Knox and Caroline GenzaleSAE International Journal of Engines 9 (2) 932 (2016)
https://doi.org/10.4271/2016-01-0745
1 (2016)
https://doi.org/10.4271/2016-01-0860
Prediction of the Nozzle Flow and Jet Characteristics at Start and End of Injection: Transient Behaviors
Michele Battistoni, Claudio Poggiani and Sibendu SomSAE International Journal of Engines 9 (1) 84 (2015)
https://doi.org/10.4271/2015-01-1850
1 (2015)
https://doi.org/10.4271/2015-01-1920