- Bayanak M., Zarinabadi S., Shahbazi K. (2019) Experimentation optimization of effective parameters on fluid migration in drilling cement slurry in well hydrocarbon, Noor Publishing, Iran. [Google Scholar]
- Cadix A., Thant K., Neufeld J., Nelson T., Auneau L., Phan C., Wilson J. (2017) Short term gas migration control in well cementing: Comparative behavior of fluid loss control polymers, in: SPE International Conference on Oilfield Chemistry, 2017, Society of Petroleum Engineers, Montgomery, Texas, USA, 19 p. doi: 10.2118/184564-MS. [Google Scholar]
- Vu M.H., Bois A.P., Badalamenti A. (2018) Gas migration modeling to prevent sustained casing pressure and casing vent flow, in: SPE/IADC Middle East Drilling Technology Conference and Exhibition, 2018, Society of Petroleum Engineers, Abu Dhabi, UAE, 24 p. [Google Scholar]
- Stone W.H., Christian W.W. (1974) The inability of unset cement to control formation pressure, in: SPE Symposium on Formation Damage Control, 1974, Society of Petroleum Engineers. [Google Scholar]
- Cooke C.E. Jr, Kluck M.P., Medrano R. (1983) Field measurements of annular pressure and temperature during primary cementing, J. Pet. Technol. 35, 8, 1429–1438. SPE-11206-PA. [CrossRef] [Google Scholar]
- Garcia J., Clark C. (1976) An investigation of annular gas flow following cementing operations, in: SPE Symposium on Formation Damage Control, 1976, Society of Petroleum Engineers. [Google Scholar]
- Al-Buraik K., Al-Abdulqader K., Bsaibes R. (1998) Prevention of shallow gas migration through cement, in: IADC/SPE Asia Pacific Drilling Technology Conference, Jakarta, Indonesia, 7–9 September 1998. SPE-47775-MS. doi: 10.2118/47775-MS. [Google Scholar]
- Parcevaux P., Sault P. (1984) Cement shrinkage and elasticity: a new approach for a good zonal isolation, in: SPE Annual Technical Conference and Exhibition, 1984, Society of Petroleum Engineers. [Google Scholar]
- Cheung P., Beirute R.M. (1985) Gas flow in cements, J. Pet. Technol. 37, 6, 1041–1048. [CrossRef] [Google Scholar]
- Levine D.C., Thomas E.W., Bezner H.P., Tolle G.C. (1979) Annular gas flow after cementing: A look at practical solutions, in: SPE Annual Technical Conference and Exhibition, 1979, Society of Petroleum Engineers. doi: 10.2118/8255-MS. [Google Scholar]
- Bour D., Wilkinson J. (1992) Combating gas migration in the Michigan basin, SPE Drill. Eng. 7, 1, 65–71. [CrossRef] [Google Scholar]
- Tinsley J.M., Miller E.C., Sabins F.L., Sutton D.L. (1980) Study of factors causing annular gas flow following primary cementing, J. Pet. Technol. 32, 8, 1427–1437. doi: 10.2118/8257-PA. [CrossRef] [Google Scholar]
- Stewart R., Schouten F. (1988) Gas invasion and migration in cemented annuli: Causes and cures, SPE Drill. Eng. 3, 1, 77–82. [CrossRef] [Google Scholar]
- Watters L.T., Sabins F.L. (1980) Field evaluation of method to control gas flow following cementing, in: SPE Annual Technical Conference and Exhibition, 1980, Society of Petroleum Engineers. [Google Scholar]
- Seidel F., Greene T. (1985) Use of expanding cement improves bonding and aids in eliminating annular gas migration in Hobbs Grayburg-San Andres wells, in: SPE Annual Technical Conference and Exhibition, 1985, Society of Petroleum Engineers. [Google Scholar]
- Guangchao D., Honghua L., Hongjuan O., Jie L. (2016) Study on gas migration prevention of cementing slurry improved by surfactant, Petrochem. Ind. Technol. 2016, 5, 40. [Google Scholar]
- Bhattacharjee G., Barmecha V., Kushwaha O.S., Kumar R. (2018) Kinetic promotion of methane hydrate formation by combining anionic and silicone surfactants: Scalability promise of methane storage due to prevention of foam formation, J. Chem. Thermodyn. 117, 248–255. doi: 10.1016/j.jct.2017.09.029. [Google Scholar]
- Sutton D., Ravi K. (1989) New method for determining downhole properties that affect gas migration and annular sealing, in: SPE Annual Technical Conference and Exhibition, 1989, Society of Petroleum Engineers. [Google Scholar]
- Kwatia G., Al R.M., Salehi S., Teodoriu C. (2019) Enhanced cement composition for preventing annular gas migration, in: ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering, American Society of Mechanical Engineers Digital Collection. doi: 10.1115/OMAE2019-95589. [Google Scholar]
- Wilkins R.P., Free D. (1989) A new approach to the prediction of gas flow after cementing, in: SPE/IADC Drilling Conference, New Orleans, Louisiana, 28 February–3 March 1989. SPE-18622-MS. doi: 10.2118/18622-MS. [Google Scholar]
- Thakkar A., Raval A., Chandra S., Shah M., Sircar A. (2020) A comprehensive review of the application of nanosilica in oil well cementing, J. Pet. 6, 2, 123–129. doi: 10.1016/j.petlm.2019.06.005. [Google Scholar]
- Wojtanowicz A.K., Smith J.R., Novakovic D., Chimmalgi V.S., Newman K.R., Dusterhoft D., Gahan B. (2002) Cement pulsation treatment in wells, in: SPE Annual Technical Conference and Exhibition. doi: 10.2118/77752-ms. [Google Scholar]
- Moritis G. (2008) SWP advances CO2 sequestration ECBM EOR demos, Oil Gas J. 106, 37, 60–63. [Google Scholar]
- Dean G.D., Brennen M.A. (1992) A unique laboratory gas flow model reveals insight to predict gas migration in cement, in: SPE Western Regional Meeting, Bakersfield, California 30 March–1 April 1992. SPE-24049-MS. doi: 10.2118/24049-MS. [Google Scholar]
- Ahmed S., Ezeakacha C.P., Salehi S. (2018) Improvement in cement sealing properties and integrity using conductive carbon nano materials: From strength to thickening time, in: SPE Annual Technical Conference and Exhibition, Dallas, Texas, USA, 24–26 September 2018. SPE-191709-MS, doi: 10.2118/191709-MS. [Google Scholar]
- Abbas G., Irawan S., Kumar S., Kalwar S.A. (2014) Experimental study of gas migration prevention through cement slurry using hydroxypropylmethylcellulose, in: IADC/SPE Asia Pacific Drilling Technology Conference, Bangkok, Thailand, 25–27 August 2014. SPE-170538-MS. https://doi-org.ezproxy.lib.ou.edu/10.2118/170538-MS [Google Scholar]
- King G.E., King D.E. (2013) Environmental risk arising from well-construction failure-differences between barrier and well failure and estimates of failure frequency across common well types, locations, and well age, SPE Prod. Oper. 28, 4, 323–344. SPE-166142-PA. doi: 10.2118/166142-PA. [Google Scholar]
- Griffin T., Spangle L., Nelson E. (1979) New expanding cement promotes better bonding, Oil Gas J. 77, 26, 143. [Google Scholar]
- Němeček J., Li L., Xi Y. (2017) Electrokinetic nanoparticle injection for remediating leaks in oil well Cement, Constr. Build. Mater. 156, 63–72. doi: 10.1016/j.conbuildmat.2017.08.152. [Google Scholar]
- Goboncan V.C., Dillenbeck R.L. (2003) Real-time cement expansion/shrinkage testing under downhole condition for enhanced annular isolation, in: SPE/IADC Drilling Conference. doi: 10.2118/79911-ms. [Google Scholar]
- Mata C., Calubayan A. (2016) Use of hollow glass spheres in lightweight cements – selection criteria, in: SPE – Asia Pacific Oil & Gas Conference and Exhibition. doi: 10.2118/82399-ms. [Google Scholar]
- Al-Yami A.S., Al-Humaidi A.S. (2016) High density cement formulation to prevent gas migration problems. Google Patents 2016. doi: 10.2118/187700-MS. [Google Scholar]
- Al-Yami A.S. (2015) An Innovative cement formula to mitigate gas migration problems in deep gas wells: Lab studies and field cases, in: SPE Kuwait Oil & Gas Show and Conference, Mishref, Kuwait, 11–14 October 2015. doi: 10.2118/175194-MS. [Google Scholar]
- Pour M.M., Moghadasi J. (2007) New cement formulation that solves gas migration problems in Iranian South Pars field condition, in: SPE Middle East Oil and Gas Show and Conference, Society of Petroleum Engineers. doi: 10.2523/105663-MS. [Google Scholar]
- Lackey G., Rajaram H., Sherwood O.A., Burke T.L., Ryan J.N. (2017) Surface casing pressure as an indicator of well integrity loss and stray gas migration in the Wattenberg Field Colorado, Environ. Sci. Technol. 51, 6, 3567–3574. [Google Scholar]
- Nelson E.B., Guillot D. (2006) Well cementing, 2nd edn., Schlumberger, Sugar Land, Texas, USA. [Google Scholar]
- API (2011) 10A-specification for cements and materials for well cementing, Tech. Rep., American Petroleum Institute. [Google Scholar]
- ASTM (2010) C465-standard specification for processing additions for use in the manufacture of hydraulic cements, Tech. Rep. [Google Scholar]
- ASTM (2007) C150-Standard specification for Portland cement, Tech. Rep. [Google Scholar]
- Chinh N.H., Son N.H., Son D.V., Be N.V., Thuan N.V. (2015) Casing and cementing with potential gas influx, PetroVietnam 6, 27–32. [Google Scholar]
- Al-Ramadan M., Salehi S., Teodoriu C. (2019) Enhanced cement composition for preventing annular gas migration, in: ASME 38th International Conference on Ocean Offshore and Arctic Engineering, Glasgow, Scotland, UK, 9–14 June 2019. OMAE 2019-95589. [Google Scholar]
- Guo R., Chen Y., Cotinho R.P., Waltrich P.J. (2017) Numerical and experimental investigation of gas kick migration during casing while drilling, in: SPE Health, Safety, Security, Environment & Social Responsibility Conference-North America, New Orleans, Louisiana, USA, 18–20 April 2017. SPE-184416-MS. doi: 10.2118/184416-ms. [Google Scholar]
- Nelson E.B. (1990) Well Cementing, , Newnes, Vol. 28. [Google Scholar]
- Sanchez F., Sobolev K. (2010) Nanotechnology in concrete – A review, Constr. Build. Mater. 24, 2010, 2060–2071. doi: 10.1016/j.conbuildmat.2010.03.014 . [Google Scholar]
- Santra A., Boul P.J., Pang X. (2012) Influence of nanomaterials in oilwell cement hydration and mechanical properties, in: SPE International Oilfield Nanotechnology Conference and Exhibition, Noordwijk, The Netherlands, 12–14 June 2012. SPE 156937. doi: 10.2118/156937-ms. [Google Scholar]
- Ershadi V., Ebadi T., Rabani A.R., Ershadi L., Soltanian H. (2011) The effect of nanosilica on cement matrix permeability in oil well to decrease the pollution of receptive environment, Int. J. Environ. Sci. Develop. 2, 2, 128–132. doi: 10.7763/ijesd.2011.v2.109 . [Google Scholar]
- Fakoya M.F., Shah S.N. (2017) Emergence of nanotechnology in the oil and gas industry: Emphasis on the application of silica nanoparticles, J. Pet. 3, 4, 391–405. doi: 10.1016/j.petlm.2017.03.001 . [Google Scholar]
- Li Z., Vandenbossche J., Iannacchione A., Brigham J., Kutchko B. (2016) Theory-based review of limitations with static gel strength in cement/matrix characterization, SPE Drill. Comp. 31, 2, 145–158. doi: 10.2118/178923-pa . [CrossRef] [Google Scholar]
- Rai S., Tiwari S. (2018) Nanosilica in cement hydration, Mater. Today Proc. 5, 3, 9196–9202. doi: 10.1016/j.matpr.2017.10.044 . [Google Scholar]
- Quercia G., Brouwers H.J.H. (2010) Application of nanosilica (nanosilica) in concrete mixtures, in: 8th Fib PhD Symposium in Kgs, Lyngby, Denmark. [Google Scholar]
- Zhang J., Weissinger E.A., Peethamparan S., Scherera G.W. (2010) Early hydration and setting of oil well cement, Cem. Concr. Res. 40, 7, 1023–1033. doi: 10.1016/j.cemconres.2010.03.014 . [Google Scholar]
- Lin K.L., Chang W.C., Lin D.F., Luo H.L., Tsai M.C. (2008) Effects of nano-SiO2 and different ash particle sizes on sludge ash–cement mortar, J. Environ. Manage. 88, 708–714. [PubMed] [Google Scholar]
- Qing Y., Zenan Z., Deyu K., Rongshen C. (2007) Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume, Constr. Build. Mater. 21, 3, 539–545. doi: 10.1016/j.conbuildmat.2005.09.001 . [Google Scholar]
- Gaitero J.J., Campillo I., Guerrero A. (2008) Reduction of the calcium leaching rate of cement paste by addition of silica nanoparticles, Cem. Concr. Res. 38, 1112–1118. [Google Scholar]
- Kleef V.R.P.A.R., Vliet V.J.P.M. (1993) Improving the reliability of cement-setting-time tests by taking into account the influence of shear, SPE Drill. Comp. 8, 1, 51–56. doi: 10.2118/20926-pa . [CrossRef] [Google Scholar]
- Soltanian H., Mortazavi A.R. (2016) The use of nano accelerator in cement slurries in low temperature well conditions, J. Pet. Sci. Technol. 6, 1, 109–114. doi: 10.22078/jpst.2016.574 . [Google Scholar]
- Setiati N.R. (2017) Effects of additional nanosilica of compressive strength on mortar, IOP Conf. Ser. Mater. Sci. Eng. 2017, 223, 012065. doi: 10.1088/1757-899x/223/1/012065 . [Google Scholar]
Open Access
Numéro |
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 75, 2020
|
|
---|---|---|
Numéro d'article | 67 | |
Nombre de pages | 15 | |
DOI | https://doi.org/10.2516/ogst/2020044 | |
Publié en ligne | 1 octobre 2020 |
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.