ogst
Accueil Tous les numéros Volume 74 (2019) Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 74 (2019) 29 Références
Open Access
Numéro
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 74, 2019
Numéro d'article 29
Nombre de pages 17
DOI https://doi.org/10.2516/ogst/2019001
Publié en ligne 20 mars 2019
  • Glossary S.O. (2010) Schlumberger. Retrieved from http://glossary.Connect.Slb.Com. Terms: Core plug. Formation evaluation. [Google Scholar]
  • Cosentino L. (2001) Integrated reservoir studies, Editions Technip, Paris, France. [Google Scholar]
  • Gaafar G.R., Tewari R.D., Zain Z.M. (2015) Overview of advancement in core analysis and its importance in reservoir characterisation for maximising recovery, SPE Asia Pacific Enhanced Oil Recovery Conference, Society of Petroleum Engineers. doi: 10.2118/174583-MS. [Google Scholar]
  • Alotaibi M.B., Azmy R., Nasr-El-Din H.A. (2010) Wettability challenges in carbonate reservoirs, SPE Improved Oil Recovery Symposium, Society of Petroleum Engineers. doi: 10.2118/129972-MS. [Google Scholar]
  • Ehrenberg S.N., Nadeau P.H. (2005) Sandstone vs. carbonate petroleum reservoirs: A global perspective on porosity-depth and porosity-permeability relationships, AAPG Bull. 89, 4, 435–445. doi: 10.1306/11230404071. [CrossRef] [Google Scholar]
  • Pizarro J.O.D.S., Branco C.C.M. (2012) Challenges in implementing an EOR Project in the Pre-salt Province in Deep Offshore Brasil, West Asia, Society of Petroleum Engineers. doi: 10.2118/155665-MS [Google Scholar]
  • Barbassa A.G. (2007) Fato Relevante, Análise da Área de Tupi, Disponível em: http://siteempresas.bovespa.com.br/consbov/arquivosexibe.asp?Site=&protocolo=140478. [Accessed: 6-Sept-2017]. [Google Scholar]
  • Greaves M., Wilson A., Al-Honi M., Lockett A.D. (1996) Improved recovery of light/medium heavy oils in heterogeneous reservoirs using air injection/insitu combustion (ISC), Society of Petroleum Engineers. doi: 10.2118/35693-MS. [Google Scholar]
  • Amba S.H., Chilingar G.V., Beeson C.M. (1962) Application of electrical current for increasing flow rate of oil and water in porous media, Society of Petroleum Engineers. [Google Scholar]
  • Raimondi P., Torcaso M.A. (1964) Distribution of the oil phase obtained upon imbibition of water, Society of Petroleum Engineers. doi: 10.2118/570-PA. [Google Scholar]
  • Amba S.A., Chilingar G.V., Beeson C.M. (1964) Use of direct electrical current for increasing the flow rate of reservoir fluids during petroleum recovery, Petroleum Society of Canada. doi: 10.2118/64-01-02. [Google Scholar]
  • Anbah S.A., Chilingar G.V., Beeson C.M. (1965) Application of electrical current for increasing the flow rate of oil and water in a porous medium, Petroleum Society of Canada. doi: 10.2118/65-02-05. [Google Scholar]
  • Heath L.J. (1965) Variations in permeability and porosity of synthetic oil reservoir rock-methods of control, Society of Petroleum Engineers. doi: 10.2118/1087-PA. [Google Scholar]
  • Bernard G.G. (1967) Effect of floodwater salinity on recovery of oil from cores containing clays, Society of Petroleum Engineers. doi: 10.2118/1725-MS [Google Scholar]
  • Chilingar G.V., El-Nassir A., Stevens R.G. (1970) Effect of direct electrical current on permeability of sandstone cores, Society of Petroleum Engineers. doi: 10.2118/2332-PA. [Google Scholar]
  • Mccaffery F.G., Bennion D.W. (1974) The effect of wettability on two-phase relative penneabilities, Petroleum Society of Canada. doi: 10.2118/74-04-04. [Google Scholar]
  • Arihara N., Ramey H.J., Brigham W.E. (1976) Nonisothermal single- and two-phase flow through consolidated sandstones, Society of Petroleum Engineers. doi: 10.2118/5380-PA. [Google Scholar]
  • Williams L.H., Underdown D.R. (1981) New polymer offers effective, permanent clay stabilization treatment, Society of Petroleum Engineers. doi: 10.2118/8797-PA. [Google Scholar]
  • Craighead M.S., Hossaini M., Watson R.W. (1983) Foamed anhydrous methanol stimulation, Society of Petroleum Engineers. doi: 10.2118/12315-MS. [Google Scholar]
  • Anderson W.G. (1986) Wettability literature survey – Part 1: Rock/oil/brine interactions and the effects of core handling on wettability, Society of Petroleum Engineers. doi: 10.2118/13932-PA. [Google Scholar]
  • Lu Y. (1988) Study of property of cationic surfactants for preventing clay from swelling, Society of Petroleum Engineers. doi: 10.2118/17826-MS. [Google Scholar]
  • Jing X.D., Daltaban T.S., Archer J.S. (1989) Experimental measurements on the effects of pressure and temperature on electric properties of natural and synthetic rocks, International Society for Rock Mechanics. [Google Scholar]
  • Bushnell-Watson Y.M., Panesar S.S. (1991) Differential sticking laboratory tests can improve mud design, Society of Petroleum Engineers. doi: 10.2118/22549-MS. [Google Scholar]
  • Ferris F.G., Stehmeler l.G., Kantzas A., Mouritis F.M. (1992) Bacteriogenic mineral plugging, Petroleum Society of Canada. doi: 10.2118/SS-92-11. [Google Scholar]
  • Ranjbar M., Rupp J., Pusch G., Meyn R. (1992) Quantification and optimization of viscoelastic effects of polymer solutions for enhanced oil recovery, Society of Petroleum Engineers. doi: 10.2118/24154-MS. [Google Scholar]
  • Zhong L., Islam M.R. (1995) A new microbial plugging process and its impact on fracture remediation, Society of Petroleum Engineers. doi: 10.2118/30519-MS. [Google Scholar]
  • Furre A.K., Holt R.M. (1995) Anisotropy of a synthetic layered porous medium, Society of Exploration Geophysicists. [Google Scholar]
  • Dorman J., Udvary F. (1996) Comparative evaluation of temporary blocking fluid systems for controlling fluid loss through perforations, Society of Petroleum Engineers. doi: 10.2118/31081-MS. [Google Scholar]
  • Kucharski E., Price G., Li H., Joer H.A. (1996) Laboratory evaluation of CIPS cemented calcareous and silica sands, in: Institution of engineers, Australia (eds), Proceedings of the 7th Australia New Zealand Conference on Geomechanics, South Australia, pp. 102–107. ISBN: 0858256525. [Google Scholar]
  • Kucharski E., Price G., Li H., Joer H.A., (1997) Engineering properties of CIPS cemented calcareous sand, in: Wang S., Marinor P. (eds), Proceedings of the 30th International Geological Congress, Vol. 23, International Science, Beijing, China, pp. 449–460. [Google Scholar]
  • Weinan W., Xi Z., Xiuwen G., Qingzhen C. (1997) Experimental investigation on the dielectric constant of rocks with low porosity and permeability, Society of Petroleum Engineers. doi: 10.2118/30871-PA. [Google Scholar]
  • Brignoli M., Fanuel P., Holt R.M., Kenter C.J. (1998) Effects on core quality of a bias stress applied during coring, Society of Petroleum Engineers. doi: 10.2118/47262-MS. [Google Scholar]
  • Hjelmeland O., Tjetland B.G., Ardø B.A., Bolle L., Scheie Å., Venturini C. (1998) A new method for stabilization of friable and unconsolidated core samples at well-site, J. Pet. Sci. Eng. 19, 1, 7–19. [Google Scholar]
  • Holt R.M., Brignoli M., Kenter C.J., Meij R., Schutjens P.M.T.M. (1998) From core compaction to reservoir compaction: correction for core damage effects, Society of Petroleum Engineers. doi: 10.2118/47263-MS. [Google Scholar]
  • Thompson T.A., Deshon P.A., Evans D., Evans B. (1999) Stress-induced anisotropic properties of synthetic sandstone core, Society of Exploration Geophysicists [Google Scholar]
  • Fjaer E., Holt R.M. (1999) Stress and stress release effects on acoustic velocities from cores, logs and seismics, Society of Petrophysicists and Well-Log Analysts. [Google Scholar]
  • Ismail M.A., Joer H.A., Randolph M.F. (2000) Sample preparation technique for artificially cemented soils, Geotech. Test. J. 23, 2, 171–177. doi: 10.1520/GTJ11041J. [CrossRef] [Google Scholar]
  • Nes O.-M., Holt R.M., Fjær E. (2000) The reliability of core data as input to seismic reservoir monitoring studies, Society of Petroleum Engineers. doi: 10.2118/65180-MS. [Google Scholar]
  • Hou J., Liu Z., Xia H. (2001) Viscoelasticity of ASP Solution is a more important factor of enhancing displacement efficiency than ultra-low interfacial tension in ASP flooding, Society of Petroleum Engineers. doi: 10.2118/71061-MS. [Google Scholar]
  • Hou J., Ziu Z., Yue X., Xia H. (2001) Study of the effect of asp solution viscoelasticity on displacement efficiency, Society of Petroleum Engineers. doi: 10.2118/71492-MS. [Google Scholar]
  • Nemati M., Voordouw G. (2002) Biologically formed calcium carbonate: a durable plugging agent for enhanced oil recovery, Petroleum Society of Canada. doi: 10.2118/2002-134-EA. [Google Scholar]
  • Lakatos I., Toth J., Bauer K., Lakatos-Szabo J., Palasthy G., Wöltje H. (2003) Comparative study of different silicone compounds as candidates for restriction of water production in gas wells, Society of Petroleum Engineers doi: 10.2118/80204-MS. [Google Scholar]
  • Holt R.M., Lehr C., Kenter C.J., Spits P. (2003, July 1) In-situ porosity from cores: Poroelastic correction for stress relief during coring. society of petrophysicists and well-log analysts, Society of Petrophysicists and Well-Log Analysts. [Google Scholar]
  • Sherlock D., Siggins A. (2004) The development of synthetic cips sandstones for geophysical research, Society of Exploration Geophysicists. [Google Scholar]
  • Xia H., Wang D., Wu J., Kong F. (2004) Elasticity of HPAM solutions increases displacement efficiency under mixed wettability conditions, Society of Petroleum Engineers. doi: 10.2118/88456-MS. [Google Scholar]
  • Hou J., Liu Z., Zhang S., Yang J. (2005) The role of viscoelasticity of alkali/surfactant/polymer solutions in enhanced oil recovery, J. Pet. Sci. Eng. 47, 3, 219–235. [Google Scholar]
  • Ronan L. (2005) Fabrication of synthetic reservoir rock core and application to NMR logging, Society of Petroleum Engineers. doi: 10.2118/99283-STU. [Google Scholar]
  • Ariadji T. (2005) Effect of vibration on rock and fluid properties: On seeking the vibroseismic technology mechanisms, Society of Petroleum Engineers. doi: 10.2118/93112-MS. [Google Scholar]
  • Sales E.D.S., Bianco L.C.B., de Queiroz Neto J.C., Campos E.F., Lopes R.T. (2007) Study of skin damage in unconsolidated sandstone by computed tomography, Society of Petroleum Engineers. doi: 10.2118/107832-MS. [Google Scholar]
  • Wang R., Chen Z., Qin J., Zhao M. (2008) Performance of drainage experiments with orinoco belt heavy oil in a long laboratory core in simulated reservoir conditions, Society of Petroleum Engineers. doi: 10.2118/104377-PA. [Google Scholar]
  • Kawamura T., Sakamoto Y., Ohtake M., Yamamoto Y., Haneda H., Komai T. (2008) Dissociation behavior of hydrate core sample using thermodynamic inhibitor-Part 2: Experimental investigation using long core samples, International Society of Offshore and Polar Engineers. [Google Scholar]
  • Kariznovi M., Nourozieh H., Jamialahmadi M., Shahrabadi A. (2008) Optimization of asphaltene deposition and adsorption parameter in porous media by using genetic algorithm and direct search, Society of Petroleum Engineers. doi: 10.2118/114037-MS. [Google Scholar]
  • Wang W., Lu Xi, Xie X. (2008) Evaluation of intra-molecular cross-linked polymers, Society of Petroleum Engineers. doi: 10.2118/113760-MS. [Google Scholar]
  • Martins A.L., Costa F.G., Chuvas D., Macedo F.S., Aragao A.F.L. (2009) Preventing hole enlargement while drilling heavy offshore oil reservoirs, Society of Petroleum Engineers. doi: 10.2118/124119-MS. [Google Scholar]
  • Zhao R., Zhao H., Yue X., Wu Y., Ke W. (2010) Enhanced heavy oil recovery from fractured vuggy carbonated reservoir of Tahe oilfield with N2/CO2 gas mixture, Society of Petroleum Engineers. doi: 10.2118/132247-MS. [Google Scholar]
  • Londoño G. (2010) Manual de procedimientos de ensayo en el equipo de desplazamiento radial, Universidad Industrial de Santander, Instituto Colombiano de Petróleo. [Google Scholar]
  • Al Shahri H.G., Liu J., Liu K., Clennell M.B. (2010) Investigation of ASP flooding efficiency on CIPS cores: Homogenous case, SPE EOR Conference at Oil & Gas West Asia, 11–13 April, Muscat, Oman, Society of Petroleum Engineers. doi: 10.2118/129226-MS. [Google Scholar]
  • Costa F.G., Ferreira M.V.D., Campos E.F., Macedo F., Aragao A.F.L., Martins A.L. (2010) An experimental study to define operational parameters governing hole enlargement while drilling offshore heavy-oil reservoirs, Society of Petroleum Engineers. doi: 10.2118/128915-MS. [Google Scholar]
  • Purnama G.W. (2011) Laboratory studies: Analysis of resin composition to handle sand problems on unconsolidated gas formation, Society of Petroleum Engineers. doi: 10.2118/152362-STU. [Google Scholar]
  • Lu X., Wang S., Wang R., Wang H., Zhang S. (2011) Adaptability of a deep profile control agent to reservoirs: Taking the Lamadian Oilfield in Daqing as an example, Pet. Expl. Dev. 385, 576–582. [CrossRef] [Google Scholar]
  • Xu Y., Lu M. (2011) Microbially enhanced oil recovery at simulated reservoir conditions by use of engineered bacteria, J. Pet. Sci. Eng. 782, 233–238. [Google Scholar]
  • Habibi A., Pourafshari P., Ahmadi M., Ayatollahi S. (2011) Reduction of fine migration by nanofluids injection: An experimental study, Society of Petroleum Engineers. doi: 10.2118/144196-MS. [Google Scholar]
  • Celis L.A., Fernandez O.D. (2012) Estudio experimental de procesos de inyección de agua en el equipo de desplazamiento radial con medios porosos estratificados, Universidad Industrial de Santander. [Google Scholar]
  • Melo L.M.P.D. (2012) Análise Numérico-Experimental de Rochas Carbonáticas Sintéticas Submetidas á Injeção de um Fluido Reativo, Universidade Federal de Pernambuco, Brazil. [Google Scholar]
  • Wang L., Ma G., Liu B., Wu Z., Wang C., Chen J., Yang W.O., Yuan Z., Wu Q., Jin C., Wang R., He H. (2012) Probe on anti-sloughing film-forming drilling fluid technologhy to be used when drilling medium changed to drilling fluid during gas drilling, Society of Petroleum Engineers. doi: 10.2118/155681-MS. [Google Scholar]
  • Yasuhara H., Neupane D., Hayashi K., Okamura M. (2012) Experiments and predictions of physical properties of sand cemented by enzymatically-induced carbonate precipitation, Soils Found. 52, 3, 539–549. doi: 10.1016/j.sandf.2012.05.011. [Google Scholar]
  • Alarcón L.A., Cavanzo E.A. (2013) Estudio experimental de Un proceso de inyección continua de vapor en el equipo de desplazamiento radial (E.D.R) con medios porosos homogeneos. Trabajo de grado presentado como requisito para optar el titulo de ingeniero de petróleos, Universidad Industrial de Santander, Colombia. [Google Scholar]
  • Liu J., Lu X., Liu J., Hu S., Xue B. (2013) Mechanism and gelling effects of linked polymer solution in the core, Pet. Expl. Dev. 40, 4, 507–513. [CrossRef] [Google Scholar]
  • Zhao L., Chen Y., Ning Z., Wu X., Liu L., Chen X. (2013) Stress sensitive experiments for abnormal overpressure carbonate reservoirs: A case from the Kenkiyak fractured-porous oil field in the littoral Caspian Basin, Pet. Expl. Dev. 40, 2, 208–215. [CrossRef] [Google Scholar]
  • Niu L., Lu X., Xiong C., Tang X., Wu X., Xu J., Zhang S. (2013) Experimental study on gelling property and plugging effect of inorganic gel system (OMGL), Pet. Expl. Dev. 40, 6, 780–784. [CrossRef] [Google Scholar]
  • Tarek T.A. (2014) Petrophysical characterization of the effect of xanthan, Dalhousie University, Nova Scotia, Canada. Submitted in partial fulfillment of the requirements for the degree of Master of Engineering. Major subject: Petroleum Engineering. [Google Scholar]
  • Xiao K., Jiang H., Wang Q., Wang H., Zhao D. (2014) Adaptability study on plugging thief zones with asphalt particle in polymer flooding offshore field, Society of Petroleum Engineers. doi: 10.2118/169931-MS. [Google Scholar]
  • Padron R.E., Lizcano J.C. (2014) Evaluación del efecto de la depositación de asfaltenos en el medio poroso a condiciones dinámicas para un crudo colombiano, Universidad Industrial de Santander, Colombia. [Google Scholar]
  • Jirui H., Haibo L., Jiang Y., Ming L.U.O., Zheng Z., Zhang L., Dengyu Y.U.A.N. (2014) Macroscopic three-dimensional physical simulation of water flooding in multi-well fracture-cavity unit, Pet. Expl. Dev. 41, 6, 784–789. [CrossRef] [Google Scholar]
  • Caceres S.J., Porras K.L. (2015) Construcción de equipo electroneumático para la fabricación de medios porosos sintéticos, Universidad Industrial de Santander, Colombia. [Google Scholar]
  • Oyama H., Abe S., Sato T. (2015) Experimental study of mud erosion phenomena at sand mud alternate layer, International Society of Offshore and Polar Engineers, Hawaii, USA. [Google Scholar]
  • Xie K., Lu X., Li Q., Jiang W., Yu Q. (2016) Analysis of reservoir applicability of hydrophobically associating polymer, Society of Petroleum Engineers. doi: 10.2118/174553-PA. [Google Scholar]
  • Mishra S., Ojha K. (2016) Application of an improvised inorganic–organic chemical mixture to consolidate loose sand formations in oil fields, J. Pet. Sci. Eng. 137, 1–9. [Google Scholar]
  • Oyama H., Abe S., Yoshida T., Sato T., Nagao J., Tenma N., Narita H. (2016) Experimental study of mud erosion at the interface of an artificial sand-mud alternate layer, J. Nat. Gas Sci. Eng. 34, 1106–1114. [Google Scholar]
  • Yoshida T., Yamaguchi T., Oyama H., Sato T., Fytianos G., Kano Y., Nagao J., Tenma N., Narita H., Brumby P.E. (2016) Pore-scale numerical simulation of mud erosion in the subsea sand–mud alternate layer using lattice Boltzmann method, J. Nat. Gas Sci. Eng. 36, 62–70. [Google Scholar]
  • Luquot L., Gouze P., Niemi A., Bensabat J., Carrera J. (2016) CO 2-rich brine percolation experiments through Heletz reservoir rock samples (Israel): Role of the flow rate and brine composition, Int. J. Greenhouse Gas Control 48, 44–58. [CrossRef] [Google Scholar]
  • Hashmat M.D., Sultan A.S., Rahman S., Hussain S.M.S. (2016) Crosslinked polymeric gels as loss circulation materials: An experimental study, Society of Petroleum Engineers. doi: 10.2118/182740-MS. [Google Scholar]
  • Sedaghatzadeh M., Shahbazi K., Ghazanfari M.H., Zargar G. (2016) Experimental investigation of self-repeating effect of different nanoparticles on internal mud cake formation by water-based drilling fluid in directional wells, Society of Petroleum Engineers. doi: 10.2118/180669-MS . [Google Scholar]
  • Narayan A., Awoleke O.O., Ahmadi M., Liu J. (2016) An investigation into the cold heavy oil production with sand process using synthetic cores and designed experiments, Society of Petroleum Engineers. doi: 10.2118/180373-MS. [Google Scholar]
  • Guo Y., Hu J., Zhang X., Feng R., Li H. (2016) Flow behavior through porous media and microdisplacement performances of hydrophobically modified partially hydrolyzed polyacrylamide, Society of Petroleum Engineers. doi: 10.2118/178921-PA. [Google Scholar]
  • Pei Y., Yang Q., Zhao Q., Ma Z., Liu W. (2016) Influence of water saturation on acoustic properties of two-phase medium based artificial cores, Society of Exploration Geophysicists. [Google Scholar]
  • Lyu X., Liu Z., Hou J., Lyu T. (2017) Mechanism and influencing factors of EOR by N2 injection in fractured-vuggy carbonate reservoirs, J. Nat. Gas Sci. Eng. 40, 226–235. [Google Scholar]
  • Van Paassen L.A., Van Loosdrecht M.C.M., Pieron M., Mulder A., Ngan-tillard D.J.M., Van der Linden T.J.M. (2009) Strength and deformation of biologically cemented sandstone, in: ISRM Regional Symposium-EUROCK 2009, International Society for Rock Mechanics. Document ID: ISRM-EUROCK-2009-063. [Google Scholar]
  • Tiab D., Donaldson E.C (2004) Petrophysics, Elsevevier, New York, NY, 889 p. [Google Scholar]
  • Holstein E. (2007) Reservoir engineering and petrophysics-petroleum engineering handbook, 1017 p. Chap. 10. [Google Scholar]
  • Ci cioglu M. (1987) Measurement of agglomerate strength distributions in agglomerated powders. Retrospective Theses and Dissertations. 11673 p. http://lib.dr.iastate.edu/rtd/11673 [Google Scholar]
  • ABNT (1986) Solo: Ensaio de compactação, Associação Brasileira de Normas Técnicas, Rio de Janeiro, Brazil. N. B. R. 7182. [Google Scholar]
  • Manière C., Zahrah T., Olevsky E.A. (2017) Fluid dynamics thermo-mechanical simulation of sintering: Uniformity of temperature and density distributions, Appl. Therm. Eng. 123, 603–613. doi: 10.1016/j.applthermaleng.2017.05.116. [Google Scholar]
  • Weinbrandt R.M., Fatt I. (1969) A scanning electron microscopy study of the pore structure of sandstone, J. Pet. Tech. Soc. Pet. Eng., 21, 543. doi: 10.2118/2363-PA. [CrossRef] [Google Scholar]
  • Farley J.T., Miller B.M., Schoettle V. (1970) Design criteria for matrix stimulation with hydrochloric-hydrofluoric acid, J. Pet. Tech. 22, 433. [CrossRef] [Google Scholar]
  • Abdallah W., Buckley J., Carnegie A., Bernd J., Fordham E., Graue A., Seleznev T., Hussain H., Montaron B., Ziauddin M. (2007) Fundamentals of wettability, Technology 38, 1125–1144, 268. [Google Scholar]
  • Pentland C.H., Tanino Y., Iglauer S., Blunt M.J. (2010) Residual saturation of water-wet sandstones: experiments, correlations and pore-scale modeling, Society of Petroleum Engineers. doi: 10.2118/133798-MS. [Google Scholar]
  • Chatzis I., Kuntamukkula M.S., Morrow N.R. (1988) Effect of capillary number on the microstructure of residual oil in strongly water-wet sandstones, Society of Petroleum Engineers. doi: 10.2118/13213-PA. [Google Scholar]
  • Manrique E., Gurfinkel M., Muci V. (2004) Enhanced oil recovery field experiences in carbonate reservoirs in the United States, in: Norwegian Petroleum Directorate (eds), Proceedings of the 25th Annual Workshop & Symposium Collaborative Project on Enhanced Oil Recovery, International Energy Agency. [Google Scholar]
  • Masalmeh S.K., Wei L., Blom C., Jing X. (2014) EOR options for heterogeneous carbonate reservoirs currently under waterflooding, in: Abu Dhabi International Petroleum Exhibition and Conference, 10–13 November, Abu Dhabi, UAE, Society of Petroleum Engineers. doi: 10.2118/171900-MS. [Google Scholar]
  • Adnan Al-dhahli, Geiger S., van Dijke M.I.J. (2011) Three-phase pore-network modelling for mixed-wet carbonate reservoirs, Society of Petroleum Engineers. doi: 10.2118/147991-MS. [Google Scholar]
  • Akkurt R., Merkel R.H., Coates G.R., Stever R.C. (2000) Remaining oil saturation from NMR in a mixed-wet, three-phase carbonate reservoir, Society of Petroleum Engineers. doi: 10.2118/63216-MS. [Google Scholar]
  • Souza F.D., Bragança S.R. (2013) Caracterização tecnológica de um calcário dolomítico in natura, calcinado e sulfatado como meio dessulfurante, Cerâm. São Paulo, SP 59,350, 331–337. [Google Scholar]
  • Software Frechcreek. [Online] Available: www.frenchcreeksoftware.com. [Accessed: 14-Nov-2017]. [Google Scholar]
  • Dolomite mineral data. [Online] Available: http://webmineral.com/data/Dolomite.shtml#.WsZvOmaZNbU. [Accessed: 5-Apr-2018]. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.