ogst
Accueil Tous les numéros Volume 72 / Numéro 1 (January–February 2017) Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 72 1 (2017) 5 Références
Open Access

Cet article a un erratum : [https://doi.org/10.2516/ogst/2018030]

Numéro
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 72, Numéro 1, January–February 2017
Numéro d'article 5
Nombre de pages 23
DOI https://doi.org/10.2516/ogst/2016025
Publié en ligne 14 février 2017
  • Abu-Shiekah I., Glasbergen G., Balushi S., van Wunnik J. (2014) Conformance control treatments for water and chemical flooding: opportunity and risk evaluation, Paper SPE-169665-MS. Presented at SPE EOR Conference at Oil and Gas West Asia, 31 March-2 April, Muscat, Oman. [Google Scholar]
  • Ali S.M.F., Thomas S. (1996) The promise and problems of enhanced oil recovery methods, J. Can. Pet. Technol. 35, 07, 57–63. [Google Scholar]
  • Alpay O.A. (1972) A practical approach to defining reservoir heterogeneity, J. Pet. Technol. 24, 07, 841–848, SPE-3608-PA. [CrossRef] [Google Scholar]
  • Bai B., Wei M., Liu Y. (2013) Field and lab experience with a successful preformed particle gel conformance control technology, Paper SPE-164511-MS. Presented at SPE Production and Operations Symposium, 23-26 March, Oklahoma City, Oklahoma, USA. [Google Scholar]
  • Bai B., Li L., Liu Y., Wang Z., You C. (2007) Preformed particle gel for conformance control: factors affecting its properties and applications, SPE Res. Eval. & Eng. 10, 04, 415–422. [Google Scholar]
  • Borling D., Chan K., Hughes T., Sydansk R. (1994) Pushing out the oil with conformance control, Oilfield Review 6, 2, 44–58. [Google Scholar]
  • Bryant I., Malinverno A., Prange M., Gonfalini M., Moffat J., Swager D., Theys P., Verga F. (2002) Understanding uncertainty, Oilfield Review 14, 3, 2–15. [Google Scholar]
  • Capen E.C. (1976) The difficulty of assessing uncertainty, Paper SPE-5579-PA. DOI: 10.2118/5579-PA. [Google Scholar]
  • Chang H.L. (1978) Polymer flooding technology yesterday, today, and tomorrow, J. Pet. Technol. 30, 08, 1113–1128. [CrossRef] [Google Scholar]
  • Clay T.D., Menzie D.E. (1966) The effect of polymer additives on oil recovery in conventional waterflooding, Paper SPE-1670-MS. Presented at SPE Four Corners Regional Meeting, 9-10 September, Farmington, New Mexico, USA. [Google Scholar]
  • Cocuzza M., Pirri C., Rocca V., Verga F. (2012) Current and future nanotech applications in the oil industry, Am. J. Applied Sci. 9, 6, 784–793. [CrossRef] [Google Scholar]
  • Detling K.D. (1944) Process of recovering oil from oil sands, USA Patent 2,341,500 [Google Scholar]
  • El-Karsani K.S.M., Al-Muntasheri G.A., Hussein I.A. (2014) Polymer systems for water shutoff and profile modification: a review over the last decade, SPE J. 19, 01, 135–149. [Google Scholar]
  • Farouq Ali S.M. (2013) All you need is Darcy’s equation to determine EOR success or failure, Presented at SPE Western Regional & AAPG Pacific Section Meeting 2013 Joint Technical Conference, 19-25 April, Monterey, California, USA. [Google Scholar]
  • Fethi G., Kaddour K., Tesconi M., Brancolini A., Carniani C., Galli G.A. (2010) El Borma – Bright Water – Tertiary method of enhanced oil recovery for a mature field, Paper SPE-136140-MS. Presented at SPE Production and Operations Conference and Exhibition, 8-10 June, Tunis, Tunisia. [Google Scholar]
  • Fletcher A., Davis J. (2010) How EOR can be transformed by nanotechnology, Paper SPE-129531-MS. Presented at SPE Improved Oil Recovery Symposium, 24-28 April, Tulsa, Oklahoma, USA. [Google Scholar]
  • Galli G., Morra D., Ghaddab F., Tesconi M., Manrique E.J., Freeman G.G. (2012) Thermally activated particle treatment to improve sweep efficiency: Pilot test results and field scale application design in El Borma Field (Tunisia), SPE-154042-MS. Presented at SPE Improved Oil Recovery Symposium, 14-18 April, Tulsa, Oklahoma, USA. [Google Scholar]
  • Gatlin C., Slobod R.L. (1960) The alcohol slug process for increasing oil recovery, J. Pet. Technol. 12, 03. [Google Scholar]
  • Gogarty W.B. (1967) Mobility control with polymer solutions, SPE J. 7, 02, 161–173. [Google Scholar]
  • Green D.W., Willhite G.P. (1998) Enhanced oil recovery. SPE Textbook Series Vol. 6. Society of Petroleum Engineers. ISBN: 978-1-55563-077-5. [Google Scholar]
  • Kaminsky R.D., Wattenbarger R.C., Szafranski R.C., Coutee A. (2007) Guidelines for polymer flooding evaluation and development. IPTC-11200-MS. Presented at International Petroleum Technology Conference, 4-6 December, Dubai, UAE. [Google Scholar]
  • Karmakar G.P., Singh R.P. (1997) Synthesis and characterization of starch - G - Acrylamide Copolymers for improved oil recovery operations, Paper SPE-37297-MS. Presented at International Symposium on Oilfield Chemistry, 18-21 February, Houston, Texas, USA. [Google Scholar]
  • Kumar M., Hoang V.T., Satik C., Rojas D.H. (2008) High-mobility-ratio waterflood performance prediction: Challenges and new insights, SPE Res. Eval. & Eng. 11, 01, 186–196. [Google Scholar]
  • Lake L.W. (1987) Chemical Flooding, in Petroleum engineering handbook, society of petroleum engineers, H.B. Bradley (ed.),Richardson, Texas, ISBN: 1-55563-010-3. [Google Scholar]
  • Lefebvre X., Sauvant-Moynot V., Choqueuse D., Chauchot P. (2009) Durability of syntactic foams for deep offshore insulation: modelling of water uptake under representative ageing conditions in order to predict the evolution of buoyancy and thermal conductivity, Oil & Gas Science and Technology – Rev. IFP 64, 2, 165–178. [CrossRef] [EDP Sciences] [Google Scholar]
  • Li Z., Delshad M. (2014) Development of an analytical injectivity model for non-newtonian polymer solutions, SPE Reservoir Simulation Symposium, 18-20 February, The Woodlands, Texas, USA. [Google Scholar]
  • Liu X.-E. (1995) Development and application of the water control and profile modification technology in china oil fields, Paper SPE-29907-MS. Presented at International Meeting on Petroleum Engineering, 14-17 November, Beijing, China. [Google Scholar]
  • Lozanski W.R., Martin I. (1970) Taber South – Canada’s first polymer flood, J. Can. Pet. Technol. 9, 02, 99–106. [CrossRef] [Google Scholar]
  • Mack J.C., Smith J.E. (1994) In-depth colloidal dispersion gels improve oil recovery efficiency, Paper SPE-27780-MS. Presented at SPE/DOE Improved Oil Recovery Symposium, 17-20 April, Tulsa, Oklahoma, USA. [Google Scholar]
  • Manrique E.J., Thomas C.P., Ravikiran R., Izadi Kamouei M., Lantz M., Romero J.L., Alvarado V. (2010) EOR: Current status and opportunities, Paper SPE-130113-MS. Presented at SPE Improved Oil Recovery Symposium, 24-28 April, Tulsa, Oklahoma, USA. [Google Scholar]
  • McVay D.A., Dossary M.N. (2014) The value of assessing uncertainty. Paper SPE-160189-PA. [Google Scholar]
  • Miranda C.R., De Lara L.S., Tonetto B.X. (2012) Stability and mobility of functionalized silica nanoparticles for enhanced oil recovery application, Paper SPE-157033-MS. Presented at SPE International Oilfield Nanotechnology Conference and Exhibition, 12-14 June, Noordwijk, The Netherlands. [Google Scholar]
  • Moradi-Araghi A., Cleveland D.H., Westerman I.J. (1987) Development and evaluation of eor polymers suitable for hostile environments: II-Copolymers of acrylamide and sodium AMPS, Paper SPE-16273-MS. Presented at SPE International Symposium on Oilfield Chemistry, 4-6 February, San Antonio, Texas, USA. [Google Scholar]
  • Morelato P., Rodrigues L., Romero O.J. (2011) Effect of polymer injection on the mobility ratio and oil recovery, Paper SPE-148875-MS. Presented at SPE Heavy Oil Conference and Exhibition, 12-14 December, Kuwait City, Kuwait. [Google Scholar]
  • Moritis G. (1998) EOR oil production up slightly, Oil Gas J. 96, 16, 49–77. [Google Scholar]
  • Moritis G. (2010) Special report: EOR/heavy oil survey: CO2 miscible, steam dominate enhanced oil recovery processes, Oil Gas J. 108, 14, 36–53. [Google Scholar]
  • Mungan N. (1969) Rheology and adsorption of aqueous polymer solutions, J. Can. Pet. Technol. 8, 02, 45–50. [CrossRef] [Google Scholar]
  • Mungan N. (1970) Water flooding with polymer solutions. SPE-3172-MS. [Google Scholar]
  • Mungan N., Smith F.W., Thompson J.L. (1966) Some aspects of polymer floods, J. Pet. Technol. 18, 09, 1143–1150. [CrossRef] [Google Scholar]
  • Mustoni J.L., Denyer P., Norman C. (2010) Deep conformance control by a novel thermally activated particle system to improve sweep efficiency in mature waterfloods of the San Jorge Basin, Paper SPE-129732-MS. Presented at SPE Improved Oil Recovery Symposium, 24-28 April, Tulsa, Oklahoma, USA. [Google Scholar]
  • Needham R.B., Doe P.H. (1987) Polymer flooding review, J. Pet. Technol. 39, 12, 1503–1507. [Google Scholar]
  • Needham R.B., Threlkeld C.B., Gall J.W. (1974) Control of water mobility using polymers and multivalent cations, Paper SPE-4747-MS. Presented at SPE Improved Oil Recovery Symposium, 22-24 April, Tulsa, Oklahoma, USA. [Google Scholar]
  • Ogolo N.A., Olafuyi O.A., Onyekonwu M.O. (2012) Enhanced oil recovery using nanoparticles, Paper SPE-160847-MS. Presented at SPE Saudi Arabia Section Technical Symposium and Exhibition, 8-11 April, Al-Khobar, Saudi Arabia. [Google Scholar]
  • Ohms D., McLeod J.D., Graff C.J., Frampton H., Morgan J.C., Cheung S.K., Chang K.-T. (2010) Incremental-oil success from waterflood sweep improvement in Alaska, SPE Prod. & Oper. 25, 03, 247–254. [CrossRef] [Google Scholar]
  • Pledger H., Meister J.J., Hogen-Esch T.E., Butler G.B. (1979) Starch-acrylamide graft copolymers for use in enhanced oil recovery, Paper SPE-8422-MS. Presented at SPE Annual Technical Conference and Exhibition, 23-26 September, Las Vegas, Nevada, USA. [Google Scholar]
  • Pritchett J., Frampton H., Brinkman J., Cheung S., Morgan J., Chang K.T., Goodgame J. (2003) Field application of a new in-depth waterflood conformance improvement tool, Paper SPE-84897-MS. Presented at SPE International Improved Oil Recovery Conference in Asia Pacific, 20-21 October, Kuala Lumpur, Malaysia. [Google Scholar]
  • Pye D.J. (1964) Improved secondary recovery by control of water mobility, J. Pet. Technol. 16, 08, 911–916. [CrossRef] [Google Scholar]
  • Raney K.H., Ayirala S., Chin R.W., Verbeek P. (2012) Surface and subsurface requirements for successful implementation of offshore chemical enhanced oil recovery, SPE Prod. & Oper. 27, 03, 294–305. [Google Scholar]
  • Regtien J.M.M. (2010) Extending the smart fields concept to enhanced oil recovery, Paper SPE-136034-MS. Presented at SPE Russian Oil and Gas Conference and Exhibition, 26-28 October, Moscow, Russia. [Google Scholar]
  • Sakač N., Gvozdić V., Sak-Bosnar M. (2012) Determination of the botanical origin of starch using direct potentiometry and PCA, Carbohydr. Polym. 87, 4, 2619–2623. [CrossRef] [Google Scholar]
  • Saleh L.D., Wei M., Bai B. (2014) Data analysis and updated screening criteria for polymer flooding based on oilfield data, SPE Res. Eval. & Eng. 17, 01, 15–25. [Google Scholar]
  • Sandiford B.B. (1964) Laboratory and field studies of water floods using polymer solutions to increase oil recoveries, J. Pet. Technol. 16, 08, 917–922. [CrossRef] [Google Scholar]
  • Sangermano M., Verga F., Montanaro L. (2011) Metodo per il recupero di olio da un giacimento mediante fluidi micro(nano)strutturati a rilascio controllato di sostanze barriera (Methos for recovering oil from a reservoir by means of micro(nano)-structured fluids with controlled release of barrier substances), Patent No. MI2010A002412. [Google Scholar]
  • Seright R.S., Zhang G., Akanni O.O., Wang D. (2012) A comparison of polymer flooding with in-depth profile modification, Presented at the SPE Canadian Unconventional Resources Conference, 15-17 November, Calgary, Canada. [Google Scholar]
  • Seright R.S. (2011) Use of polymers to recover viscous oil from unconventional reservoirs, Technical Report U.S. Department of Energy, DOE Contract No. DE-NT0006555, US DOE, Washington, DC. 12 October, 2011. [CrossRef] [Google Scholar]
  • Seright R.S., Seheult J.M., Talashek T. (2009) Injectivity characteristics of EOR polymers, SPE Res. Eval. & Eng. 12, 05, 783–792. [Google Scholar]
  • Seright R.S., Liang J. (1994) A survey of field applications of gel treatments for water shutoff, Paper SPE-26991-MS. Presented at SPE Latin America/Caribbean Petroleum Engineering Conference, 27-29 April, Buenos Aires, Argentina. [Google Scholar]
  • Seright R.S. (1991) Impact of dispersion on gel placement for profile control, SPE Res. Eng. 6, 03, 343–352. [Google Scholar]
  • Shaw R.A., Stright D.H. (1977) Performance of the Taber south polymer flood, J. Can. Pet. Technol. 16, 01, 35–40. [Google Scholar]
  • Sheng J.J., Leonhardt B., Azri N. (2015) Status of polymer-flooding technology, J. Can. Pet. Technol. 54, 02, 116–126. [CrossRef] [Google Scholar]
  • Sherborne J.E., Sarem A.M., Sandiford B.B. (1967) Flooding oil-containing formations with solutions of polymer in water, Proc. 7th World Petroleum Congress, 2-9 April, Mexico City, Mexico, WPC-12251, 506–515. [Google Scholar]
  • Swami A., Shi J., Gadde S., Votruba A.R., Kolishetti N., Farokhzad O.C. (2012) Nanoparticles for targeted and temporally controlled drug delivery, in Svenson S., Prude’homme R. (eds.), Multifunctional nanoparticles for drug delivery applications: Imaging, targeting, and delivery, Nanostructure Science and Technology series, Springer, US, Chap. 2, pp. 9–29. [CrossRef] [Google Scholar]
  • Sydansk R., Romero-Zerón L. (2011) Reservoir conformance improvement, Society of Petroleum Engineers, Richardson, Texas, ISBN 978-1-55563-302-8. [Google Scholar]
  • Sydansk R.D. (2007) Polymers, gels, foams, and resins, in: Lake L.W. (ed.), Reservoir Engineering and Petrophysics, Chap. 13, Vol. V(B). Society of Petroleum Engineers, Richardson, Texas, pp. 1149–1260. [Google Scholar]
  • Sydansk R.D., Moore P.E. (1990) Production responses in Wyoming’s Big Horn Basin resulting from application of acrylamide-polymer/Cr III-carboxylate gels, Paper SPE-21894-MS. Unpublished. [Google Scholar]
  • Taber J.J., Martin F.D., Seright R.S. (1997a) EOR screening criteria revisited – Part 1: introduction to screening criteria and enhanced recovery field projects, SPE Res. Eng. 12, 03, 189–198. [Google Scholar]
  • Taber J.J., Martin F.D., Seright R.S. (1997b) EOR screening criteria revisited – Part 2: applications and impact of oil prices, SPE Res. Eng. 12, 03, 199–205. [Google Scholar]
  • Taber J.J., Kamath I.S.K., Reed R.L. (1961) Mechanism of alcohol displacement of oil from porous media, SPE J. 1, 03, 195–212. [CrossRef] [Google Scholar]
  • Thomas F.B., Shtepani E., Marosi G., Bennion D.B. (2002) Production well water coning – Is there anything we can do? Paper PETSOC-2002-031. Presented at Canadian International Petroleum Conference, 11-13 June, Calgary, Alberta, Canada. [Google Scholar]
  • Uhrich K.E., Cannizzaro S.M., Langer R.S. (1999) Polymeric systems for controlled drug release, Chem. Rev. 99, 11, 3181–3198. [CrossRef] [PubMed] [Google Scholar]
  • Viberti D., Verga F. (2012) An approach for the reliable evaluation of the uncertainties associated to petrophysical properties, Math. Geosci. 44, 3, 327–341. [CrossRef] [Google Scholar]
  • Wachmann C. (1964) A mathematical theory for the displacement of oil and water by alcohol, SPE J. 4, 03, 250–266. [CrossRef] [Google Scholar]
  • Whittington L.E., Naae D.G., Braun R.W. (1994) Brine-initiated gels: A new water shut-off agent, Paper SPE-27830-MS. Presented at SPE/DOE Improved Oil Recovery Symposium, 17-20 April, Tulsa, Oklahoma, USA. [Google Scholar]
  • Yerramilli S.S., Zitha P.L.J., Yerramilli R.C. (2013) Novel insight into polymer injectivity for polymer flooding, Paper SPE-165195-MS. Presented at SPE European Formation Damage Conference & Exhibition, 5-7 June, Noordwijk, The Netherlands. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.