Dossier: Molecular Structures of Heavy Oils and Coal Liquefaction Products
Open Access
Numéro
Oil & Gas Science and Technology - Rev. IFP
Volume 63, Numéro 1, January-February 2008
Dossier: Molecular Structures of Heavy Oils and Coal Liquefaction Products
Page(s) 9 - 19
DOI https://doi.org/10.2516/ogst:2007060
Publié en ligne 30 octobre 2007
  • Owens W.D., Suter V.E. (1965) Steam Stimulation – Newest Form of Secondary Petroleum Recovery, Oil and Gas J. 82-87, 90.
  • Denbina E.S., Boberg T.C., Rotter M.B. (1991) Evaluation of Key Reservoir Drive Mechanisms in the Early Cycles of Steam Stimulation at Cold Lake, SPE Reservoir Engineer., 207-211.
  • Farouq Ali S.M., Meldau R.F. (1979) Current Steamflood Technology, J. Petrol. Technol., 1332-1342.
  • Stokes D.D., Doscher T.M. (1974) Shell Makes a Success of Steam Flood at Yorba Linda, Oil and Gas J., 71-76.
  • FarouqAli S.M. (1982) Steam Injection Theory – A Unified Approach, paper SPE 10746, California Regional Meeting of the Society of Petroleum Engineers, San Francisco, March 24-26, 1982.
  • Butler R.M. (1985) A New Approach to the Modeling of Steam-Assisted Gravity Drainage, J. Can. Petrol. Technol., 42-50.
  • Das S.K.,Butler R.M. (1995) Extraction of Heavy Oil and Bitumen using Solvents at Reservoir Pressure, paper No. 95-118, Proceeding of the Sixth Petroleum Conference of the South Saskatchewan Section of the Petroleum Society of CIM, Regina, Sask., Oct. 16-18, 1995.
  • Jespersen P.J.,Fontaine T.J.C. (1993) Tangleflags North Pilot: A Horizontal Well Steamflood, J. Can. Petrol. Technol. 32, 5, 52-57. [CrossRef]
  • Chu Cheih (1977) A Study of Fireflood Field Projects, paper SPE 5821, J. Petrol. Technol., 111-120.
  • Chu Cheih (1982) State-of-the-Art Review of Fireflood Field Projects, paper SPE 9772, J. Petrol. Technol., 19-32.
  • Greaves M.,Xia T.X.,Imbus S.,Nero V. (2004) THAI-CAPRI Processes: Tracing downhole upgrading of heavy oil, Paper 067, Proceedings of the Canadian International Petroleum Conference, Calgary, Alberta, Canada, June 8-10, 2004.
  • Greaves M.,Xia T.X. (2004) Downhole Catalytic process for Upgrading Heavy Oil: Produced Oil Properties and Composition, J. Can. Petrol. Technol. 43, 9, 25-30.
  • Selby Rawya, Alikhan A.A., FarouqAli S.M. (1989) Potential of Non-thermal Methods for Heavy Oil Recovery, J. Can. Petrol. Technol. 28, 4, 45-59.
  • Nguyen T.A., FarouqAli S.M. (1988) Effect of Nitrogen on the Solubility and Diffusivity of Carbon Dioxide into Oil and Oil Recovery by the Immiscible WAG Process, J. Can. Petrol. Technol. 37, 2, 24-31.
  • Stalkup Jr. F.I. (1992) Miscible Displacement, Monograph Series, Society of Petroleum Engineers, Richardson, TX, 1992, Vol. 8.
  • Holm L.W. (1959) Carbon dioxide Solvent Flooding for Increased Oil Recovery, Trans. AIME 216, 225-231.
  • Sanchez L.,Astudillo A.,Rodriguez F.,Morales J.,Rodriguez A. (2005) Nitrogen Injection in the Cantarell Complex: Results after Four Years of Operation, SPE 97385, Proceedings of the Latin American and Caribbean Petroleum Engineering Conference, Rio de Janeiro, Brazil, June 20-23, 2005.
  • Thomas S., FarouqAli S.M. (1999) Status and Assessment of Chemical Oil Recovery Methods, Energy Sources 21, 177-189. [CrossRef]
  • Thomas S., Farouq Ali S.M. (1993) Field Experience with Chemical Oil Recovery Methods, Proceeding of the 21st Australian Chemical Engineering Conference (Chemeca 93), Melbourne, Australia, Sept. 26-29, 1993, pp. 45-3-49-3.
  • Chang H.L. (1978) Polymer Flooding Technology – Yesterday, Today and Tomorrow, SPE 7043, J. Petrol. Technol. 30, 8, 1113-1128. [CrossRef]
  • Somasundaran P, Hanna H.S. (1979) Adsorption of Sulfonates on Reservoir Rocks, SPE 7059, SPE J., 221-232.
  • Krumrine P.H., Falcone Jr. J.S. (1983) Surfactant, Polymer and Alkali Interactions in Chemical Flooding Processes, paper SPE 11778, Proceeding of the SPE International Symposium on Oilfield and Geothermal Chemistry, Denver, CO, June 1-3, 1983, pp. 79-86.
  • Mayer E.H., Breg R.L., Carmichael J.D., Weinbrandt R.M. (1983) Alkaline Injection for Enhanced Oil Recovery – A status report, J. Petrol. Technol., 209-221.
  • Johnson Jr. C.E. (1976) Status of Caustic and Emulsion Methods, J. Petrol. Technol., 85-96.
  • Froning H.R., Leach R.O. (1967) Determination of Chemical Requirement and Applicability of Wettability Alteration Flooding, J. Petrol. Technol., 839-843.
  • Gogarty W.B., Tosch W.C. (1968) Miscible-type Water-flooding: Oil Recovery with Micellar Solutions, J. Petrol. Technol., 1407-1414.
  • Farouq Ali S.M., Thomas S. (1986) Tertiary Oil Recovery of Two Alberta Oils by Micellar Flooding, Proceedings of the 37th Annual Technical Meeting of the Petroleum Society of CIM, Calgary, Alberta, June 8-11, 1986, pp. 159-184.
  • Thomas S., FarouqAli S.M. (2001) Scale-up Methods for Micellar Flooding and their Verification, J. Can. Petrol. Technol. 39, 2, 18-27.
  • Wyatt K.,Pitts M.J.,Surkalo H. (2002) Mature Waterfloods Renew Oil Production by Alkaline-Surfactant-Polymer Flooding, SPE 78711, Proceedings of the SPE Eastern Regional Meeting, Lexington, Kentucky, Oct. 23-25, 2002.
  • Shutang G., Huabin L., Zhenyu Y., Pitts M.J., Surkalo H., Wyatt K. (1996) Alkaline/Surfactant/Polymer Pilot Performance of the West Central Saertu, Daqing Oil Field, SPE Reservoir Engineer., 181-188.
  • Hitzman D.O., Sperl G.T. (1994) A New Microbial Technology for Enhanced Oil Recovery and Sulphide Prevention and Reduction, SPE/DOE 27752, Proceedings of the SPE/DOE ninth Symposium on Improved Oil Recovery, Tulsa, OK, USA, April 17-20, 1994, pp. 171-179.
  • Bryant R.S. (1994) Microbial Enhanced Hydrocarbon Recovery and its Potential for Application to North Sea Reservoirs, Trans IChemE 72, Part A, 144-151.
  • Farouq Ali S.M., SelbyRawya J. (1986) Function, Characteristics of EOR Foam Behaviour Covered in Laboratory Investigations, Technology, Oil and Gas J. 57, 60-63.
  • Moritis G. (2006) Special Report – EOR/Heavy Oil Survey, Oil and Gas J., 37-55.

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.