Dossier: Synchrotron and Neutron Solutions to Oil Industry Problems
Open Access
Oil & Gas Science and Technology - Rev. IFP
Volume 60, Numéro 5, September-October 2005
Dossier: Synchrotron and Neutron Solutions to Oil Industry Problems
Page(s) 747 - 762
Publié en ligne 1 décembre 2006
  • Anguy, Y.,Bernard, D. and Ehrlich, R. (1994) The Local Change of Scale Method for Modelling Flow in Natural Porous Media (I): Numerical Tools. Advances in Water Resources, 17, 337-351. [CrossRef] [Google Scholar]
  • Babout, L.,Maire, E.,Buffière, J.Y. and Fougères, R. (2001) Characterization by X-ray Computed Tomography of Decohesion, Porosity Growth and Coalescence in Model Metal Matrix Composites. Acta Mater., 49, 2055-2063. [CrossRef] [Google Scholar]
  • Baruchel, J., Buffière, J.Y., Maire, E., Merle, P. and Peix G. (2000) X-ray Tomography in Material Science, Hermès Sciences Pub., Paris. [Google Scholar]
  • Bernard, D. (1995) Using the Volume Averaging Technique to Perform the First Change of Scale for Natural Random Porous Media. In: Advanced Methods for Groundwater Pollution Control, Gambolati & Verri (Eds), CISM Courses and Lectures No. 364, Springer Verlag, Wien, 9-24. [Google Scholar]
  • Bernard, D. and Vignoles, G.L. (2000) In: Computational Methods for Flow and Transport in Porous Media, Crolet (Ed.), Kluwer Acad. Pub., Dordrecht, 217-229. [Google Scholar]
  • Bernard, D., Gendron, D., Bordère, S. and Heintz, J.M. (2001) First Direct 3D Visualisation of Micro Structural Changes During Sintering. ESRF Highlights 2001, 102-103. [Google Scholar]
  • Bernard, D.,Gendron, D.,Heintz, J.M.,Bordère, S. and Etourneau, J. (2005a) First Direct 3D Visualisation of Micro Structural Evolutions During Sintering Through X-ray Computed Microtomography. Acta Materialia, 53, 121-128. [CrossRef] [Google Scholar]
  • Bernard, D.,Nielsen, Ø.,Salvo, L. and Cloetens, P. (2005b) Permeability Assessment by 3D Interdendritic Flow Simulations on Microtomography Mappings of Al-Cu Alloys. Materials Science & Engineering A, 392, 112-120. [CrossRef] [Google Scholar]
  • Bernard, D., and Chirazi, A. Numerical Treatment of Ring Artefacts for the Microtomographic Image Reconstruction and Porous Media Characterisation, to be published. [Google Scholar]
  • Bord籥, S., Bernard, D., Gendron, D. and Heintz, J.M. (2004) Characterization of Elementary Sintering Processes Using Monte Carlo Simulation and X-ray Computed Microtomography. In: Computational Methods in Materials Characterisation, Mammoli, A.A. and Brebbia, C.A. (Ed.), WIT press, Southampton (UK), 23-32. [Google Scholar]
  • Burlion, N., Bernard, D. and Chen, D. (2005) X-ray Microtomography: Application to Microstructure Analysis of a Cementitious Material During Leaching Process. Cement and Concrete Composites, in press. [Google Scholar]
  • Duliu, O.G. (1999) Computer Axial Tomography in Geosciences: an Overview. Earth-Science Reviews, 48, 265-281. [CrossRef] [Google Scholar]
  • Gendron, D. (2001) Étude numérique et expérimentale du frittage à l’échelle du grain. Thèse, Université Bordeaux I. [Google Scholar]
  • German, R.M. (1996) Sintering Theory and Practice, Wiley- Interscience pub., New York. [Google Scholar]
  • Herman, G.T. (1980) Image Reconstruction from Projections: the Fundamentals of Computerized Tomography, Academic Press, New York. [Google Scholar]
  • Maintz, J.B.A., and Viergever, M.A. (1998) A Survey of Medical Image Registration. Medical Image Analysis, 2, 1, 1-36. [CrossRef] [PubMed] [Google Scholar]
  • Mees, F., Swennen, R., Van Geet, M. and Jacobs, P. (2003) Applications of X-ray Computed Tomography in the Geosciences. Geol. Soc. Special Pub. No. 215, Geological Society, London. [Google Scholar]
  • Natterer, F. (1999) Numerical Methods in Tomography. Acta. Num., 8, 107-141. [CrossRef] [MathSciNet] [Google Scholar]
  • Noiriel, C.,Gouze, P. and Bernard, D. (2004) Investigation of Porosity and Permeability in Relation with Microstructure Changes During Limestone Dissolution. Geophys. Res. Lett., 31, L24603, doi:10.1029/2004GL021572. [CrossRef] [Google Scholar]
  • Noiriel, C.,Gouze, P.,Bernard, D. and Thibault, X. (2005) Hydraulic Properties and Micro-geometry Evolution Accompanying Limestone Dissolution by Acidic water. Oil & Gas Science and Technology – Revue de l’Institut Français du Pétrole, 60, 1, 177-192. [CrossRef] [EDP Sciences] [Google Scholar]
  • Peyrin, F.,Salome, M.,Cloetens, P.,Laval-Jeanet, A.M.,Ritman, E. and Rüegsegger, P. (1998) Micro-CT Examinations of Trabecular Bone Samples at Different Resolutions: 14 and 2 Micron Level. Technology and Health Care, IOS Press, 6, 5-6, 391-401. [Google Scholar]
  • Renard, F.,Bernard, D.,Thibault, X. and Boller, E. (2004) Synchrotron 3D Microtomography of Halite Aggregates During Pressure Solution Creep and Evolution of the Permeability. Geophys. Res. Lett., 31, 7, L07607 10.1029/2004GL019605, 3 April. [CrossRef] [Google Scholar]
  • Stanley, J.H. (1988) Computed Tomography: the Physical and Mathematical Basis of a Powerful New Industrial Inspection Technique. ASTM Standardization News, 44-49. [Google Scholar]
  • Whitaker, S. (1999) The Method of Volume Averaging, Theory and Application of Transport in Porous Media, Vol. 13, Kluwer Acad. Pub., Dordrecht. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.