Dossier: Wetting: From Microscopic Origins to Industrial Applications - Ateliers International, Giens, May 2000
Open Access
Numéro
Oil & Gas Science and Technology - Rev. IFP
Volume 56, Numéro 1, January-February 2001
Dossier: Wetting: From Microscopic Origins to Industrial Applications - Ateliers International, Giens, May 2000
Page(s) 9 - 22
DOI https://doi.org/10.2516/ogst:2001002
Publié en ligne 1 octobre 2006
  • Young, T. (1805) An Essay on the Cohesion of Fluids. Phil. Trans. Roy. Soc. London, 95, 65-87. [CrossRef] [Google Scholar]
  • Johnson, Jr., R.E. and Dettre, R. (1969) Wettability and Contact Angles, in Surface and Colloid Science, Matijevic, E. (ed.), Vol. 2, Wiley. [Google Scholar]
  • Good, R.J. (1993) Contact Angle, Wettability and Adhesion: A Critical Review, in Contact Angle Wettability and Adhesion, Mittal, K.L. (ed.), VSP BV, The Netherlands, 3-36. [Google Scholar]
  • Saiz, E.,Tomsia, A.P. and Cannon, R.M. (1998) Ridging Effects on Wetting and Spreading of Liquids and Solids. Acta Mater., 46, 2349-2361. [CrossRef] [Google Scholar]
  • Andrade, J.D., Lee, M.S. and Gregonis, D.E. (1985) The Contact Angle and Interface Energetics, in Surface and Interfacial Aspects of Biomedical Polymers, Andrade, J.D. (ed.), Vol. 1, Plenum Press, New York. [Google Scholar]
  • Della Volpe, C. and Siboni, S. (1997) Some Reflections on Acid-Base Solid Surface Free Energy Theories. J. Coll. Interf. Sci., 195, 121-136. [CrossRef] [Google Scholar]
  • Cassie, A.B.D. and Baxter, S. (1944) Wettability on Porous Surfaces. Trans. Faraday Soc., 40, 546-551. [CrossRef] [Google Scholar]
  • Cassie, A.B.D. (1948) Contact Angles. Discussion Faraday Soc., 3, 11-16. [CrossRef] [Google Scholar]
  • Shuttleworth, R. and Bailey, C.L.J. (1948) The Spreading of a Liquid over a Rough Solid. Discussion Faraday Soc., 3, 16-22. [CrossRef] [Google Scholar]
  • Johnson, Jr., R.E. and Dettre, R. (1964) Contact Angle Hysteresis. III. Study of an Idealized Heterogeneous Surface. J. Phys. Chem., 68, 1744-1750. [CrossRef] [Google Scholar]
  • Jordan, D.O. and Lane, J.E. (1964) A Thermodynamic Discussion of the Use of a Vertical Plate Balance for the Measurement of Surface Tension. Aust. J. Chem., 17, 7-15. [CrossRef] [Google Scholar]
  • Neumann, A.W. and Good, R.J. (1972) Thermodynamics of Contact Angles. I. Heterogeneous Solid Surfaces. J. Coll. Interf. Sci., 28, 341-358. [CrossRef] [Google Scholar]
  • Li, D. and Neumann, A.W. (1996) Thermodynamic Status of Contact Angles, in Applied Surface Thermodynamics, Neumann, A.W. and Spelt, J.K. (eds.), Marcel Dekker, New York. [Google Scholar]
  • Huh, C. and Mason, S.G. (1977) Effects of Surface Roughness on Wetting. J. Coll. Interf. Sci., 60, 11-38. [CrossRef] [Google Scholar]
  • Joanny, J.F. and de Gennes, P.G. (1984) A Model for Contact Angle Hysteresis. J. Chem. Phys., 81, 552-562. [CrossRef] [Google Scholar]
  • Starov, V.M. (1992) Equilibrium and Hysteresis Contact Angles. Adv. Coll. Interf. Sci., 39, 147-173. [CrossRef] [Google Scholar]
  • Decker, E.L.,Frank, B.,Suo, Y. and Garoff, S. (1999) Physics of Contact Angle Measurements. Colloids and Surf. A, 86, 177-188. [CrossRef] [MathSciNet] [Google Scholar]
  • Öpick, U. (2000) Contact Angle Hysteresis Caused by a Random Distribution of Weak Heterogeneities on a Solid Surface. J. Coll. Interf. Sci., 223, 143-166. [CrossRef] [Google Scholar]
  • DelGiudice, G.R.M. (1936) The Bubble Machine for Flotation Testing. Eng. Mining J., 137, 291-294. [Google Scholar]
  • Fowkes, F.D. and Harkins, W.D. (1940) The State of Monolayers Adsorbed at the Interface Solid-Aqueous Solutions. J. Am. Chem. Soc., 62, 3377-3386. [CrossRef] [Google Scholar]
  • Phillipoff, W.,Cooke, S.R.B. and Caldwell, D.E. (1952) Contact Angles and Surface Coverage. Mining Eng., 4, 283-286. [Google Scholar]
  • Smith, T. and Lindberg, G. (1978) Effect of Acoustic Energy on Contact Angle Measurements. J. Coll. Interf. Sci., 66, 363-366. [CrossRef] [Google Scholar]
  • Andrieu, C.,Sykes, C. and Brochard, F. (1994) Average Spreading Parameter on Heterogeneous Surfaces. Langmuir, 10, 2077-2080. [CrossRef] [Google Scholar]
  • Decker, E.L. and Garoff, S. (1996) Using Vibrational Noise to Probe Energy Barriers Producing Contact Angle Hysteresis. Langmuir, 12, 2100-2110. [CrossRef] [Google Scholar]
  • Johnson, Jr., R.E. and Dettre, R. (1965) Contact Angle Hysteresis. IV. Contact Angle Measurement on Heterogeneous Surface. J. Phys. Chem., 69, 1507-1514. [CrossRef] [Google Scholar]
  • Schultze, R.D.,Possart, W.,Kamusewitz, H. and Bischof, C. (1989) Young’s Equilibrium Contact Angle on Rough Solid Surfaces. Part I. An Empirical Determination. J. Adhesion Sci. Technol., 3, 39-48. [CrossRef] [Google Scholar]
  • Di Meglio, J.M. (1992) Contact Angle Hysteresis and Interacting Surface Defects. Europhys. Lett., 17, 607-612. [CrossRef] [Google Scholar]
  • Johnson, Jr., R.E. and Dettre, R. (1993) Wetting of Low Energy Surfaces, in Wettability, Berg, J.C. (ed.), Marcel Dekker, New York, 2-71. [Google Scholar]
  • Wenzel, R.N. (1936) Resistance of Solid Surfaces to Wetting by Water. Ind. Eng. Chem., 28, 988-994. [CrossRef] [Google Scholar]
  • Della Volpe, C. and Siboni, S. (2000) Acid-Base Solid Surface Free Energies and the Definition of Scales in Goodvan Oss-Chaudury Theory. J. Adhesion Sci. Technol., 14, 239-276. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.