The Citing articles tool gives a list of articles citing the current article. The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
This article has been cited by the following article(s):
77 articles
Crude‐to‐Chemical Revolution: Integrating Technologies, Economic Feasibility, and Policy Frameworks for Sustainable Light Olefin Production
Aliyu Musa Alhassan, Basiru O. Yusuf, Ijaz Hussain, Abdulkadir Tanimu, Khalid R. Alhooshani, Bassam El Ali and Saheed A. Ganiyu The Chemical Record 25(8) (2025) https://doi.org/10.1002/tcr.202500011
Establishing the relationship between heavy oil viscosity and molecular markers using an enhanced neural network model
Molecular management in continuous catalytic reforming operations by enhanced aromatics production through transformer-driven entropy maximization reconstruction
Investigation into the shape selectivity of zeolites for conversion of polyolefin plastic pyrolysis oil model compound
Juan Gancedo, Houqian Li, Josie S. Walz, Laura Faba, Salvador Ordoñez and George W. Huber Applied Catalysis A: General 669 119484 (2024) https://doi.org/10.1016/j.apcata.2023.119484
Optimizing air distribution in floor and wall burners of an industrial steam cracking firebox: a CFD study
Florian Wéry, Moreno Geerts, Laurien A. Vandewalle, Pieter A. Reyniers, Geraldine J. Heynderickx, Guy B. Marin and Kevin M. Van Geem Chemical Engineering Research and Design 199 569 (2023) https://doi.org/10.1016/j.cherd.2023.10.017
Jia Zhang, Florence Vermeire, Ruben Van de Vijver, Marie-Françoise Reyniers and Kevin M. Van Geem (2023) https://doi.org/10.2139/ssrn.4618146
Deep Learning Aided Multi-Objective Optimization and Multi-Criteria Decision Making in Thermal Cracking Process for Olefines Production
Seyed Reza Nabavi, Mohammad Javad Jafari and Zhiyuan Wang Journal of the Taiwan Institute of Chemical Engineers 152 105179 (2023) https://doi.org/10.1016/j.jtice.2023.105179
Pursuing the End-of-Life Tire Circularity: An Outlook toward the Production of Secondary Raw Materials from Tire Pyrolysis Oil
Felipe Campuzano, Juan Daniel Martínez, Andrés F. Agudelo Santamaría, S. Mani Sarathy and William L. Roberts Energy & Fuels 37(13) 8836 (2023) https://doi.org/10.1021/acs.energyfuels.3c00847
Assessing the CO2 emission reduction potential of steam cracking furnace innovations via computational fluid dynamics: From high-emissivity coatings, over coil modifications to firing control
Florian Wéry, Moreno Geerts, Laurien A. Vandewalle, Pieter A. Reyniers, Geraldine J. Heynderickx, Guy B. Marin and Kevin M. Van Geem Chemical Engineering Research and Design 190 129 (2023) https://doi.org/10.1016/j.cherd.2022.12.017
Quantification and characterization of mineral oil in fish feed by liquid chromatography-gas chromatography-flame ionization detector and liquid chromatography-comprehensive multidimensional gas chromatography-time-of-flight mass spectrometer/flame ionization detector
Grégory Bauwens, Chiara Conchione, Nicola Sdrigotti, Sabrina Moret and Giorgia Purcaro Journal of Chromatography A 1677 463208 (2022) https://doi.org/10.1016/j.chroma.2022.463208
Machine Learning for Physicochemical Property Prediction of Complex Hydrocarbon Mixtures
Maarten R. Dobbelaere, Yannick Ureel, Florence H. Vermeire, et al. Industrial & Engineering Chemistry Research 61(24) 8581 (2022) https://doi.org/10.1021/acs.iecr.2c00442
Green synthesis of SAPO-34 molecular sieve using rice husk ash as a silica source: Evaluation of synthesis and catalytic performance parameters in methanol-to-olefin reaction
Combined Catalytic and Pyrolytic Coking Model for Steam Cracking of Hydrocarbons
Jia Zhang, Ruben Van de Vijver, Ismaël Amghizar, Marie-Françoise Reyniers and Kevin M. Van Geem Industrial & Engineering Chemistry Research 61(11) 3917 (2022) https://doi.org/10.1021/acs.iecr.1c05036
Ethylene Yield from a Large Scale Naphtha Pyrolysis Cracking Utilizing Response Surface Methodology
Mohamad Hafizi Zakria, Mohd Ghazali Mohd Nawawi and Mohd Rizal Abdul Rahman Pertanika Journal of Science and Technology 29(2) (2021) https://doi.org/10.47836/pjst.29.2.06
Alkenes - Recent Advances, New Perspectives and Applications
An intelligent hybrid feature subset selection and production pattern recognition method for modeling ethylene plant
Qing Li, Mengxuan Zhang, Xiaogang Shi, Xingying Lan, Xuqiang Guo and Yunlong Guan Journal of Analytical and Applied Pyrolysis 160 105352 (2021) https://doi.org/10.1016/j.jaap.2021.105352
Sustainable innovations in steam cracking: CO2 neutral olefin production
Ismaël Amghizar, Jens N. Dedeyne, David J. Brown, Guy B. Marin and Kevin M. Van Geem Reaction Chemistry & Engineering 5(2) 239 (2020) https://doi.org/10.1039/C9RE00398C
Computational fluid dynamics‐based optimization of dimpled steam cracking reactors for reduced CO2 emissions
Jens N. Dedeyne, Moreno Geerts, Pieter A. Reyniers, Florian Wéry, Kevin M. Van Geem and Guy B. Marin AIChE Journal 66(8) (2020) https://doi.org/10.1002/aic.16255
Discerning complex reaction networks using automated generators
Artificial Intelligence in Steam Cracking Modeling: A Deep Learning Algorithm for Detailed Effluent Prediction
Pieter P. Plehiers, Steffen H. Symoens, Ismaël Amghizar, Guy B. Marin, Christian V. Stevens and Kevin M. Van Geem Engineering 5(6) 1027 (2019) https://doi.org/10.1016/j.eng.2019.02.013
Evaluation of retrofitting of an industrial steam cracking furnace by means of CFD simulations
Jesús González Rebordinos, Carlos Herce, Ana González-Espinosa, Miguel Gil, Cristóbal Cortés, Francisco Brunet, Laura Ferré and Alfred Arias Applied Thermal Engineering 162 114206 (2019) https://doi.org/10.1016/j.applthermaleng.2019.114206
Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion
Kevin Van Geem Computer Aided Chemical Engineering, Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion 45 295 (2019) https://doi.org/10.1016/B978-0-444-64087-1.00006-1
QUANTIS: Data quality assessment tool by clustering analysis
Steffen H. Symoens, Syam Ukkandath Aravindakshan, Florence H. Vermeire, Kevin De Ras, Marko R. Djokic, Guy B. Marin, Marie‐Françoise Reyniers and Kevin M. Van Geem International Journal of Chemical Kinetics 51(11) 872 (2019) https://doi.org/10.1002/kin.21316
Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion
Marco van Goethem, Peter Oud, Jelle-Gerard Wijnja and Rajaram Ramesh Computer Aided Chemical Engineering, Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion 45 831 (2019) https://doi.org/10.1016/B978-0-444-64087-1.00017-6
Novel cracking coil design based on positive constructing of synergetic flowing field
State-of-the-art of Coke Formation during Steam Cracking: Anti-Coking Surface Technologies
Steffen H. Symoens, Natalia Olahova, Andrés E. Muñoz Gandarillas, et al. Industrial & Engineering Chemistry Research 57(48) 16117 (2018) https://doi.org/10.1021/acs.iecr.8b03221
Compositional Characterization of Pyrolysis Fuel Oil from Naphtha and Vacuum Gas Oil
CoatAlloy Barrier Coating for Reduced Coke Formation in Steam Cracking Reactors: Experimental Validation and Simulations
Natália Olahová, Steffen H. Symoens, Marko R. Djokic, et al. Industrial & Engineering Chemistry Research 57(3) 897 (2018) https://doi.org/10.1021/acs.iecr.7b04271
Axial dispersion modeling of industrial hydrocracking unit and its multiobjective optimization
Dynamic simulation of fouling in steam cracking reactors using CFD
Laurien A. Vandewalle, David J. Van Cauwenberge, Jens N. Dedeyne, Kevin M. Van Geem and Guy B. Marin Chemical Engineering Journal 329 77 (2017) https://doi.org/10.1016/j.cej.2017.06.113
Periodic reactive flow simulation: Proof of concept for steam cracking coils
David J. Van Cauwenberge, Laurien A. Vandewalle, Pieter A. Reyniers, Kevin M. Van Geem, Guy B. Marin and Jens Floré AIChE Journal 63(5) 1715 (2017) https://doi.org/10.1002/aic.15530
Computational fluid dynamics‐based steam cracking furnace optimization using feedstock flow distribution
Yu Zhang, Pieter A. Reyniers, Carl M. Schietekat, Kevin M. Van Geem, Guy B. Marin, Wenli Du and Feng Qian AIChE Journal 63(7) 3199 (2017) https://doi.org/10.1002/aic.15669
Challenges and opportunities for molecule-based management of chemical processes
Ruben Van de Vijver, Brigitte R Devocht, Kevin M Van Geem, Joris W Thybaut and Guy B Marin Current Opinion in Chemical Engineering 13 142 (2016) https://doi.org/10.1016/j.coche.2016.09.006
Experimental and modeling investigation of the effect of the unsaturation degree on the gas-phase oxidation of fatty acid methyl esters found in biodiesel fuels
Kinetic Study of the Thermal and Catalytic Cracking of Waste Motor Oil to Diesel-like Fuels
Diana C. Vargas, María B. Alvarez, Alexis Hidrobo Portilla, Kevin M. Van Geem and Daniela Almeida Streitwieser Energy & Fuels 30(11) 9712 (2016) https://doi.org/10.1021/acs.energyfuels.6b01868
A Review of Kinetic Modeling Methodologies for Complex Processes
Luís P. de Oliveira, Damien Hudebine, Denis Guillaume, Jan J. Verstraete and J.F. Joly Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles 71(3) 45 (2016) https://doi.org/10.2516/ogst/2016011
Steam cracking of bio-derived normal and branched alkanes: Influence of branching on product distribution and formation of aromatics
Ruben De Bruycker, Ismaël Amghizar, Florence H. Vermeire, Tomi Nyman, Maija Hakola and Kevin M. Van Geem Journal of Analytical and Applied Pyrolysis 122 468 (2016) https://doi.org/10.1016/j.jaap.2016.10.017
Impact of Radiation Models in Coupled Simulations of Steam Cracking Furnaces and Reactors
Guihua Hu, Carl M. Schietekat, Yu Zhang, et al. Industrial & Engineering Chemistry Research 54(9) 2453 (2015) https://doi.org/10.1021/ie5042337
Carbon-Number-Based Kinetics, Reactor Modeling, and Process Simulation for Coal Tar Hydrogenation
Necessity and Feasibility of 3D Simulations of Steam Cracking Reactors
Pieter A. Reyniers, Carl M. Schietekat, David J. Van Cauwenberge, et al. Industrial & Engineering Chemistry Research 54(49) 12270 (2015) https://doi.org/10.1021/acs.iecr.5b02477
Catalytic Coating for Reduced Coke Formation in Steam Cracking Reactors
Carl M. Schietekat, Stamatis A. Sarris, Pieter A. Reyniers, et al. Industrial & Engineering Chemistry Research 54(39) 9525 (2015) https://doi.org/10.1021/acs.iecr.5b02263
New kinetic model of coal tar hydrogenation process via carbon number component approach
Impact of flue gas radiative properties and burner geometry in furnace simulations
Yu Zhang, Feng Qian, Yu Zhang, Carl M. Schietekat, Kevin M. Van Geem, and Guy and Guy B. Marin AIChE Journal 61(3) 936 (2015) https://doi.org/10.1002/aic.14724
Reference Module in Chemistry, Molecular Sciences and Chemical Engineering
Microkinetic model for the pyrolysis of methyl esters: From model compound to industrial biodiesel
Ruben De Bruycker, Steven P. Pyl, Marie‐Françoise Reyniers, Kevin M. Van Geem and Guy B. Marin AIChE Journal 61(12) 4309 (2015) https://doi.org/10.1002/aic.14953
Automatic Mechanism and Kinetic Model Generation for Gas‐ and Solution‐Phase Processes: A Perspective on Best Practices, Recent Advances, and Future Challenges
Ruben Van de Vijver, Nick M. Vandewiele, Pierre L. Bhoorasingh, Belinda L. Slakman, Fariba Seyedzadeh Khanshan, Hans‐Heinrich Carstensen, Marie‐Françoise Reyniers, Guy B. Marin, Richard H. West and Kevin M. Van Geem International Journal of Chemical Kinetics 47(4) 199 (2015) https://doi.org/10.1002/kin.20902
CFD-based design of 3D pyrolysis reactors: RANS vs. LES
David J. Van Cauwenberge, Carl M. Schietekat, Jens Floré, Kevin M. Van Geem and Guy B. Marin Chemical Engineering Journal 282 66 (2015) https://doi.org/10.1016/j.cej.2015.03.020
Assessing the Potential of Crude Tall Oil for the Production of Green-Base Chemicals: An Experimental and Kinetic Modeling Study
Ruben De Bruycker, Jinto M. Anthonykutty, Juha Linnekoski, et al. Industrial & Engineering Chemistry Research 53(48) 18430 (2014) https://doi.org/10.1021/ie503505f
Simulating vacuum residue hydroconversion by means of Monte-Carlo techniques
Coking Resistance of Specialized Coil Materials during Steam Cracking of Sulfur-Free Naphtha
Andrés E. Muñoz Gandarillas, Kevin M. Van Geem, Marie-Françoise Reyniers and Guy B. Marin Industrial & Engineering Chemistry Research 53(35) 13644 (2014) https://doi.org/10.1021/ie502277e
Production of bio-ethene and propene: alternatives for bulk chemicals and polymers
Application to SFC-GC × GC to heavy petroleum fractions analysis
Thomas Dutriez, Didier Thiébaut, Marion Courtiade, Hugues Dulot, Fabrice Bertoncini and Marie-Claire Hennion Fuel 104 583 (2013) https://doi.org/10.1016/j.fuel.2012.04.048
Development of a General Modelling Methodology for Vacuum Residue Hydroconversion
L. Pereira de Oliveira, J. J. Verstraete and M. KoIb Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles 68(6) 1027 (2013) https://doi.org/10.2516/ogst/2013135
Value Added Hydrocarbons from Distilled Tall Oil via Hydrotreating over a Commercial NiMo Catalyst
Jinto M. Anthonykutty, Kevin M. Van Geem, Ruben De Bruycker, et al. Industrial & Engineering Chemistry Research 52(30) 10114 (2013) https://doi.org/10.1021/ie400790v
Kinetics of Vapor-Phase Cracking of Bitumen-Derived Heavy Gas Oil
Challenge in the speciation of nitrogen-containing compounds in heavy petroleum fractions by high temperature comprehensive two-dimensional gas chromatography
Competitive Reactions of Organophosphorus Radicals on Coke Surfaces
Saron Catak, Karen Hemelsoet, Laura Hermosilla , Michel Waroquier and Veronique Van Speybroeck Chemistry – A European Journal 17(43) 12027 (2011) https://doi.org/10.1002/chem.201100712
Advances in Quantitative Analysis of Heavy Petroleum Fractions by Liquid Chromatography−High-Temperature Comprehensive Two-Dimensional Gas Chromatography: Breakthrough for Conversion Processes