ogst
Home All issues Volume 61 / No 6 (November-December 2006) Oil & Gas Science and Technology - Rev. IFP, 61 6 (2006) 715-724 References
Dossier: Deformation of Solid Polymers
Open Access
Issue
Oil & Gas Science and Technology - Rev. IFP
Volume 61, Number 6, November-December 2006
Dossier: Deformation of Solid Polymers
Page(s) 715 - 724
DOI https://doi.org/10.2516/ogst:2006009
Published online 01 January 2007
  • Whitney, W. and Andrews, R.D. (1967) Yielding of glassy polymers: volume effects. J. Polym. Sci. Pol. Sym., 16, 2981-2990. [Google Scholar]
  • Pampillo, C.A. and Davis, L.A. (1971) Volume change during deformation and pressure dependence of yield stress. J. Appl. Phys., 42, 4674-4679. [CrossRef] [Google Scholar]
  • Powers, J.M. and Caddell, R.M. (1972) The macroscopic volume changes of selected polymers subjected to uniform tensile deformation. Polym. Eng. Sci., 12, 432-436. [CrossRef] [Google Scholar]
  • Mallon, P.J.,McCammond, D. and Benham, P.P. (1972) Strain ratio and volume change during tension and compression creep of thermoplastics. Polym. Eng. Sci., 12, 420-424. [CrossRef] [Google Scholar]
  • Bucknall, C.B. and Clayton, D. (1972) Rubber-toughening of plastics, Part 1: creep mechanisms in HIPS. J. Mater. Sci., 7, 202-210. [CrossRef] [Google Scholar]
  • Bucknall, C.B.,Clayton, D. and Keast, E.W. (1972) Rubber- Toughening of plastics, Part 2: Creep mechanisms in HIPS/PPO blends. J. Mater. Sci., 7, 1443-1453. [CrossRef] [Google Scholar]
  • Tang, H.I.,Hiltner, A. and Baer, E. (1987) Biaxial orientation of polypropylene by hydrostatic solid state extrusion, Part 3: Mechanical properties and deformation mechanisms. Polym. Eng. Sci., 27, 876-886. [CrossRef] [Google Scholar]
  • Sinien, L.,Lin, Y.,Xiaoguang, Z. and Zongneng, Q. (1992) Microdamage and interfacial adhesion in glass bead-filled high-density polyethylene. J. Mater. Sci., 27, 4633-4638. [CrossRef] [Google Scholar]
  • Meddad, A. and Fisa, B. (1997) Stress-strain behavior and tensile dilatometry of glass bead-filled polypropylene and polyamide 6. Appl. Polym. Sci., 64, 653-665. [CrossRef] [Google Scholar]
  • Naqui, S.I. and Robinson, I.M. (1993) Review tensile dilatometric studies of deformation in polymeric materials and their composites. J. Mater. Sci., 28, 1421-1429. [CrossRef] [Google Scholar]
  • Delin, M.,Rychwalski, R.W.,Kubat, J.,Bertilsson, H. and Klason, C. (1994) Volume changes during flow of solid polymers. J. Non-Cryst. Solids, 172-174, 779-785. [CrossRef] [Google Scholar]
  • Castagnet, S.,Gacougnolle, J.L. and Dang, P. (2000) Correlation between macroscopical viscoelastic behaviour and micromechanisms in strained α polyvinylidene fluoride (PVDF). Mater. Sci. Eng., A276, 152-159. [Google Scholar]
  • Cherry, B.W. and Hin, T.S. (1981) Stress whitening in polyethylene. Polymer, 22, 1610-1612. [CrossRef] [Google Scholar]
  • François, P.,Gaucher, V. and Seguela, R. (1994) Local-scale analysis of the longitudinal strains in strongly necking materials by means of video-controlled extensometry. J. Phys.- Condens. Mat., 6, 8959-8968. [CrossRef] [Google Scholar]
  • Gaucher-Miri, V.,Depecker, C. and Seguela, R. (1997) Reversible strain-induced order in the amorphous phase of a low-density ethylene/butene copolymer. J. Polym. Sci. Pol. Phys., 35, 2155-2159. [Google Scholar]
  • Gloaguen, J.M. and Lefebvre, J.M. (2001) Plastic deformation behaviour of thermoplastic/clay nanocomposites. Polymer, 42, 5841-5847. [CrossRef] [Google Scholar]
  • Quatravaux, T., Elkoun, S., G'Sell, C.,Cangemi, L. and Meimon, Y. (2002) Experimental characterization of the volume strain of poly(vinylidene fluoride) in the region of homogeneous plastic deformation. J. Polym. Sci., 40, 2516-2522. [CrossRef] [Google Scholar]
  • G'Sell, C.,Hiver, J.M. and Dahoun, A. (2002) Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking. Int. J. Solids Struct., 39, 3857-3872. [CrossRef] [Google Scholar]
  • Amornsakchai, T., Olley, R.H., Basset, D.C., Al-hussein, M.O.M., Unwin, A.P. and Ward I.M. (2000) On the influence of initial morphology on the internal structure of highly drawn polyethylene. Polymer, 41, 8291-8298. [CrossRef] [Google Scholar]
  • Bai, S.L. and Wang, M. (2003) Plastic damage mechanisms of polypropylene/polyamide 6/polyethylene-octene elastomer blends under cyclic tension. Polymer, 44, 6537-6547. [CrossRef] [Google Scholar]
  • Murphy, N.S.,Minor, H.,Bednarczyk, C. and Krimm, S. (1993) Structure of the amorphous phase in oriented polymers. Macromolecules, 26, 1712-1721. [CrossRef] [Google Scholar]
  • Bartczak, Z.,Galeski, A.,Argon, A.S. and Cohen, R.E. (1996) On the plastic deformation of the amorphous component in semicrystalline polymers. Polymer, 37, 2113-2123. [CrossRef] [Google Scholar]
  • Fotheringham, D.G. and Cherry, B.W. (1978) Strain rate effects on the ratio of recoverable to non-recoverable strain in linear polyethylene. J. Mater. Sci., 13, 231-238. [CrossRef] [Google Scholar]
  • Castagnet, S.,Girault, S.,Gacougnolle, J.L. and Dang, P. (2000) Cavitation in strained polyvinylidene fluoride: mechanical and X-ray experimental studies. Polymer, 41, 7523-7530. [CrossRef] [Google Scholar]
  • Brough, I.,Haward, R.N.,Healey, G. and Wood, A. (2004) Scanning electron micrographs of high density polyethylene fracture surfaces. Polymer, 45, 3115-3123. [CrossRef] [Google Scholar]
  • Cangemi, L., Elkoun, S., G'Sell, C. and Meimon, Y. (2004) Volume strain changes of plasticized Poly(vinylidene fluoride) during tensile and creep tests. J. Appl. Polym. Sci., 91, 1784-1791. [CrossRef] [Google Scholar]
  • Wade Adams, W.,Yang, D. and Thomas, E.L. (1986) Direct visualization of microstructural deformation processes in polyethylene. J. Mater. Sci., 21, 2239-2253. [CrossRef] [Google Scholar]
  • Glenz, W.,Morosoff, N. and Peterlin, A. (1971) Density of drawn polyethylene. Polym. Lett., 9, 211-217. [CrossRef] [Google Scholar]
  • Leung, W.P.,Choy, C.L.,Zongneng, Q. and Renje, W. (1988) Mechanical anisotropy in oriented linear polyethylene of various crystallinities. J. Appl. Polym. Sci., 36, 1305-1324. [CrossRef] [Google Scholar]
  • Hay, I.L. and Keller, A. (1965) Polymer deformation in terms of spherulites. Kolloid Z. Z. Polym., 204, 43-74. [CrossRef] [Google Scholar]
  • Petermann, J. and Schultz, J.M. (1978) Lamellar separation during the deformation of HDPE. J. Mater. Sci., 13, 50-54. [CrossRef] [Google Scholar]
  • Haudin, J.M. (1982) Plastic deformation of semi-crystalline polymers, in Plastic deformation of amorphous and semicrystalline materials, G'Sell, C. and Escaig, B. (Eds.), EDP Sciences, Les Ulis, France. [Google Scholar]
  • Friedrich, K. (1983) Crazes and Shear bands in semi-crystalline thermoplastics, in Advances in polymer Science, Crazing in polymers, 52/53, Kausch, H.H. (Ed.), Springer-Verlag, Berlin-Heidelberg. [Google Scholar]
  • Butler, M.F. and Donald, A.M. (1997) Deformation of spherulitic polyethylene thin films. J. Mater. Sci., 32, 3675-3685. [CrossRef] [Google Scholar]
  • Aboulfaraj, M., G'Sell, C.,Ulrich, B. and Dahoun, A. (1995) In situ observation of the plastic deformation of polypropylene spherulites under uniaxial tension and simple shear in the scanning electron microscope. Polymer, 36, 731-742. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.