Table 1
Reservoir and fluid properties – egg-shaped model [53].
| Value | Unit | |
|---|---|---|
| Model parameter | ||
| Dimension | 60 × 60 × 7 = 25 200 | – |
| Cell dimensions size | 8(i) × 8(i) × 8(k) | meter |
| Rate’s value and pressure constraints | ||
| The maximum water injection rate | 79.5 | m3/day |
| Production well bottom-hole pressure | 39.5 × 106 | Pa |
| Model initialization parameters | ||
| Relative permeability model | Corey | |
| Corey’s exponent-factor of oil | 4 | – |
| Corey’s exponent-factor of water | 3 | – |
| Swir | 20 | % |
| Swi | 10 | % |
| Sor | 10 | % |
| Kro0 | 0.8 | – |
| Krw0 | 0.75 | – |
| Pc | 0 | Pa |
| Phi | 0.2 | – |
| Pres | 40 × 106 | Pa |
| Co | 1.0 × 10−10 | Pa−1 |
| Cw | 1.0 × 10−10 | Pa−1 |
| Cr | 0 | Pa−1 |
| Oil viscosity | 5.0 × 10−3 | Pa s |
| Water viscosity | 5.0 × 10−3 | Pa s |
| Reference economic parameters | ||
| pro | 126 | USD/m2 |
| prwp | 19 | USD/m2 |
| prwi | 5 | USD/m2 |
| Simulation time | 3600 | Day |